HARTING 09662637813 D-Sub Plug 15-Position Right Angle Solder Connector

Part Overview

The HARTING 09662637813 is a 15-position D-Sub plug connector with right-angle through-hole solder termination, designed for signal applications in industrial and electronic equipment. This connector features a 2-row (DA, A) shell size configuration with female screwlock flanges on the mating side and board lock grounding indents. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing system maintenance, repairs, and new designs requiring compatible interconnect solutions.

Key Parameters

Parameter	Value
Manufacturer Part Number	09662637813
Manufacturer	HARTING
Connector Type	Plug, Male Pins
Number of Positions	15
Shell Size, Connector Layout	2 (DA, A)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	7.5A
Operating Temperature Range	-55°C to 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09662637813 is determined by the following mandatory parameters:

Connector Type: Plug with male pins (not receptacles or female sockets)
Number of Positions: 15-position configuration
Shell Size: 2 (DA, A) layout
Mounting Type: Through-hole, right-angle orientation
Termination Method: Solder
Contact Type: Signal contacts

Substitute parts are grouped into two categories:

Category A - Direct Mechanical and Electrical Equivalents (TE Connectivity AMPLIMITE HD-20 Series) Parts 3-338169-2, 1-338169-2, 2-338169-2, and 338169-2 maintain identical mechanical form factors and electrical specifications. These parts are active products with enhanced contact finishes (gold-plated) and tin-plated steel shells. Current rating is 6A per contact, which is lower than the original 7.5A specification but operates within the same temperature range (-55°C to 105°C). Flange configurations vary (female screwlock, housing/shell threaded M3, or unthreaded), allowing selection based on mounting requirements.

Category B - Functional Equivalents with Parameter Variations Parts 5745435-8 (TE Connectivity AMPLIMITE HDP-20), DAM15P500, DAM15S300, and DAML15P500 (Amphenol ICC) provide 15-position D-Sub plug functionality with modified specifications. These parts differ in backset spacing (5745435-8 at 0.454"), contact materials (brass or phosphor bronze), shell finishes (tin-plated or yellow cadmium-plated), and voltage ratings (125V or 300V). DAM15S300 is a receptacle configuration and is not a direct substitute. Current ratings range from 6A to 7.5A per contact. Operating temperature extends to 125°C for Amphenol parts, matching the original specification.

Parameter Comparison

Parameter	HARTING 09662637813	TE 3-338169-2	TE 1-338169-2	TE 2-338169-2	TE 338169-2	TE 5745435-8	Amphenol DAM15P500	Amphenol DAML15P500
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	15	15	15	15	15	15	15	15
Shell Size	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	7.5A	6A	6A	6A	6A	6A	7.5A per Contact	7.5A per Contact
Backset Spacing	0.409" (10.40mm)	0.406" (10.30mm)	0.406" (10.30mm)	0.406" (10.30mm)	0.406" (10.30mm)	0.454" (11.53mm)	0.406" (10.30mm)	0.406" (10.30mm)
Operating Temperature	-55°C to 125°C	-55°C to 105°C	-55°C to 105°C	-55°C to 105°C	-55°C to 105°C	-55°C to 105°C	-55°C to 125°C	-55°C to 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	RoHS non-compliant	RoHS non-compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

For RoHS3-Compliant Applications: TE Connectivity parts 3-338169-2, 1-338169-2, and 338169-2 are recommended. These active products maintain ROHS3 compliance and provide gold-plated contact finishes with tin-plated steel shells. The 6A current rating is suitable for signal-level applications where the original 7.5A specification is not a limiting factor. Selection between these three variants depends on flange configuration requirements: 3-338169-2 features female screwlock (4-40), 1-338169-2 uses housing/shell threaded (4-40), and 338169-2 provides unthreaded housing/shell configuration.

For Extended Temperature Range (-55°C to 125°C): Amphenol ICC parts DAM15P500 and DAML15P500 maintain the full operating temperature range of the original HARTING connector. Both parts deliver 7.5A per contact current rating and 300V voltage rating. DAM15P500 features unthreaded housing/shell configuration, while DAML15P500 provides M3 threaded mounting. These parts are RoHS non-compliant and REACH-affected, requiring compliance verification for regulated applications.

For Mechanical Form Factor Compatibility: TE Connectivity 5745435-8 (AMPLIMITE HDP-20 series) provides an active alternative with identical 15-position, 2-row D-Sub plug configuration. This part features mounting brackets and standard screw flanges on the mating side. The 0.454" backset spacing differs from the original 0.409" specification and may require PCB layout verification. Current rating is 6A per contact with 125V voltage rating.

For Inventory and Availability: TE Connectivity 3-338169-2 offers the highest inventory availability (2662 pcs) among active substitutes, followed by 1-338169-2 (1780 pcs) and 2-338169-2 (810 pcs). Amphenol parts DAM15P500 and DAML15P500 provide 741 and 675 pcs respectively.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity AMPLIMITE HD-20 series parts directly replace the HARTING 09662637813? A: TE parts 3-338169-2, 1-338169-2, 2-338169-2, and 338169-2 are mechanically and electrically compatible for signal applications. The primary difference is the reduced current rating (6A versus 7.5A per contact). Flange configurations vary, so verify mounting requirements before selection. All four variants maintain the 15-position, 2-row D-Sub plug configuration with right-angle through-hole solder termination.

Q: What is the impact of the 0.406" versus 0.409" backset spacing difference? A: The 0.003" (0.076mm) difference between TE parts (0.406") and the original HARTING connector (0.409") is within typical PCB tolerance ranges for D-Sub connectors. This variation does not affect mating compatibility with standard D-Sub receptacles. Verify PCB layout clearances if the connector is mounted in a confined space.

Q: Are Amphenol DAM15P500 and DAML15P500 suitable for RoHS-regulated applications? A: No. Both Amphenol parts are RoHS non-compliant due to yellow cadmium plating on the steel shell. These parts are suitable only for applications where RoHS compliance is not required. For RoHS3-compliant designs, use TE Connectivity AMPLIMITE HD-20 series parts.

Q: What is the difference between DAM15P500 and DAML15P500? A: Both parts are 15-position D-Sub plugs with identical electrical specifications (7.5A per contact, 300V rating, -55°C to 125°C operating range). The primary difference is the flange configuration: DAM15P500 features unthreaded housing/shell mounting, while DAML15P500 provides M3 threaded mounting. Select based on PCB mounting hole specifications.

Q: Why is DAM15S300 listed as a substitute but not recommended? A: DAM15S300 is a 15-position D-Sub receptacle with female sockets, not a plug with male pins. This part is mechanically incompatible with the original HARTING plug connector and cannot serve as a direct substitute. It is listed only as a reference for complete connector pair configurations.

Q: Can TE Connectivity 5745435-8 be used as a direct replacement? A: TE 5745435-8 is functionally equivalent for 15-position D-Sub plug applications but differs in backset spacing (0.454" versus 0.409") and flange design (standard screws with mounting brackets versus female screwlock). Verify PCB layout compatibility before substitution. Current rating is 6A per contact.

Q: What compliance certifications are maintained across all substitute parts? A: All substitute parts maintain UL94 V-0 material flammability rating and are classified as signal contact connectors. TE Connectivity parts are ROHS3 compliant. Amphenol parts are RoHS non-compliant. REACH compliance status varies: TE 3-338169-2 is REACH-affected; TE 1-338169-2 is REACH-unaffected; Amphenol parts are REACH-affected or vendor-undefined.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message