HARTING 09662566613 D-Sub Receptacle 15-Position Right Angle Solder Connector

Part Overview

The HARTING 09662566613 is a 15-position D-Sub receptacle connector with female sockets, configured for right-angle through-hole solder termination. This connector is designed for applications requiring reliable signal transmission in industrial and commercial equipment. The part is currently active in production with 801 units in stock. Equivalent substitute parts are necessary to support supply chain flexibility, accommodate regional availability constraints, and provide design alternatives that meet identical electrical and mechanical specifications.

Substiute Parts

09662566613

HARTINGIn Stock: 86009662566613 Datasheet

Current PartRFQ

3-106506-2

TE Connectivity AMP ConnectorsIn Stock: 28513-106506-2 Datasheet

MFR RecommendedRFQ

6-106506-2

TE Connectivity AMP ConnectorsIn Stock: 7926-106506-2 Datasheet

MFR RecommendedRFQ

8-106506-2

TE Connectivity AMP ConnectorsIn Stock: 11948-106506-2 Datasheet

MFR RecommendedRFQ

D15S13A4GV00LF

Amphenol ICC (FCI)In Stock: 1994D15S13A4GV00LF Datasheet

MFR RecommendedRFQ

D15S13A4GX00LF

Amphenol ICC (FCI)In Stock: 2442D15S13A4GX00LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09662566613 is determined by strict alignment of the following critical parameters:

Core Electrical Parameters:

• Connector type: D-Sub receptacle, female sockets
• Position count: 15 positions
• Row configuration: 2 rows
• Shell size and layout: 2 (DA, A)
• Termination method: Solder
• Current rating: Minimum 6A (HARTING rated at 6.5A)
• Operating temperature range: Minimum -55°C to 105°C (HARTING extends to 125°C)

Core Mechanical Parameters:

• Mounting configuration: Through-hole, right-angle orientation
• Flange feature: Mating-side female screwlock or housing/shell mounting (4-40)
• Material flammability: UL94 V-0 minimum
• Backset spacing: 0.406" to 0.409" (10.30mm to 10.40mm)

Compliance Parameters:

• RoHS compliance: ROHS3 or RoHS Compliant
• Moisture sensitivity: MSL 1 (Unlimited)
• ECCN classification: EAR99

All five substitute parts meet these criteria and are therefore electrically and mechanically interchangeable with the HARTING 09662566613 in applications where the specified parameters are required.

Parameter Comparison

Engineering Selection Recommendations

All five substitute parts are active production components with current inventory availability and meet the core electrical and mechanical requirements for direct substitution with the HARTING 09662566613.

TE Connectivity AMPLIMITE HD-20 Series (3-106506-2, 6-106506-2, 8-106506-2): These three variants share identical electrical specifications and differ only in packaging format (tray vs. bulk) and flange configuration. All three are RoHS compliant and suitable for applications operating within the -55°C to 105°C range. The TE parts feature gold-plated phosphor bronze contacts and tin-plated steel shells, providing enhanced corrosion resistance compared to the unspecified contact finish of the HARTING part. Current rating of 6A meets the minimum requirement, though it is 0.5A lower than the HARTING specification.

Amphenol ICC Delta D Series (D15S13A4GV00LF, D15S13A4GX00LF): Both Amphenol parts extend the operating temperature range to -55°C to 125°C, matching the HARTING specification. These connectors feature higher voltage rating (300V vs. unspecified for HARTING) and tin-nickel plated steel shells. The current rating of 5A per contact is lower than both HARTING and TE specifications. Both variants include board lock and mounting bracket features. The two Amphenol variants differ in flange configuration: D15S13A4GV00LF features mating-side female screwlock, while D15S13A4GX00LF features housing/shell mounting.

Selection Basis:

• For applications requiring maximum current capacity and operating temperature range matching the HARTING original: Amphenol D15S13A4GV00LF or D15S13A4GX00LF
• For applications with standard current requirements and cost optimization: TE Connectivity 3-106506-2, 6-106506-2, or 8-106506-2
• Flange configuration selection depends on PCB layout requirements: mating-side screwlock vs. housing/shell mounting

Frequently Asked Questions (FAQ)

Q: Can I use a TE Connectivity substitute if my application requires the full 6.5A current rating of the HARTING original?

A: TE Connectivity parts are rated at 6A, which is 0.5A below the HARTING specification. Amphenol parts are rated at 5A per contact. Current capacity must be verified against your application's actual current draw. If your design requires the full 6.5A rating, the HARTING original is the appropriate choice.

Q: What is the difference between the three TE Connectivity variants (3-106506-2, 6-106506-2, 8-106506-2)?

A: All three TE parts share identical electrical and mechanical specifications. The differences are: packaging format (3-106506-2 ships in tray; 6-106506-2 and 8-106506-2 ship in bulk) and flange configuration (3-106506-2 and 8-106506-2 feature mating-side female screwlock; 6-106506-2 features housing/shell mounting). Select based on your procurement packaging requirements and PCB mounting configuration.

Q: Are the Amphenol D15S13A4GV00LF and D15S13A4GX00LF interchangeable?

A: Both Amphenol parts are electrically identical and share the same connector footprint. The difference is flange configuration: D15S13A4GV00LF has mating-side female screwlock mounting, while D15S13A4GX00LF has housing/shell mounting. Selection depends on your PCB design and mounting hole configuration. They are not interchangeable if your PCB is designed for a specific flange type.

Q: What is the backset spacing difference between HARTING (0.409") and TE (0.406")?

A: The backset spacing difference of 0.003" (0.10mm) is within standard manufacturing tolerance for D-Sub connectors and does not affect mechanical or electrical compatibility. Both measurements fall within the acceptable range for shell size 2 (DA, A) D-Sub connectors.

Q: Can I substitute a TE part rated for -55°C to 105°C if my application operates at 125°C?

A: No. If your application requires operation at 125°C, you must use either the HARTING original or the Amphenol D15S13A4GV00LF or D15S13A4GX00LF, both of which are rated to 125°C. TE parts are limited to 105°C maximum.

Q: Are all these parts RoHS compliant?

A: Yes. The HARTING original is ROHS3 compliant. TE 6-106506-2 is ROHS3 compliant. TE 3-106506-2 and 8-106506-2 are RoHS compliant. Both Amphenol parts are RoHS compliant. All parts meet RoHS requirements for lead-free solder applications.

Q: What is the difference in contact material between HARTING (Copper Alloy) and the substitutes (Phosphor Bronze)?

A: Phosphor bronze provides superior spring characteristics and corrosion resistance compared to standard copper alloy. This is an enhancement in the substitute parts and does not affect compatibility. The gold plating on substitute parts further improves contact reliability and signal integrity.