HARTING 09662536613 D-Sub Receptacle 15-Position Right Angle Solder Connector

Part Overview

The HARTING 09662536613 is a 15-position D-Sub receptacle connector with female sockets, configured for right-angle through-hole solder termination. This connector is designed for applications requiring reliable signal transmission in industrial and commercial equipment. The part is currently active in production with 698 units in stock. Equivalent substitute parts are necessary to address supply chain flexibility, packaging preferences, and specific application requirements such as operating temperature ranges or contact material specifications.

Substiute Parts

09662536613

HARTINGIn Stock: 80809662536613 Datasheet

Current PartRFQ

3-106506-2

TE Connectivity AMP ConnectorsIn Stock: 28513-106506-2 Datasheet

MFR RecommendedRFQ

6-106506-2

TE Connectivity AMP ConnectorsIn Stock: 7926-106506-2 Datasheet

MFR RecommendedRFQ

8-106506-2

TE Connectivity AMP ConnectorsIn Stock: 11948-106506-2 Datasheet

MFR RecommendedRFQ

D15S13A4GV00LF

Amphenol ICC (FCI)In Stock: 1994D15S13A4GV00LF Datasheet

MFR RecommendedRFQ

D15S13A4GX00LF

Amphenol ICC (FCI)In Stock: 2442D15S13A4GX00LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09662536613 are qualified based on the following critical parameters that must remain consistent:

• Connector Configuration: 15-position D-Sub receptacle with female sockets
• Shell Size and Layout: 2 (DA, A) standard D-Sub format
• Mounting Type: Through-hole, right-angle orientation
• Termination Method: Solder connection
• Flange Feature: Mating-side female screwlock (4-40) or housing/shell mounting
• Material Flammability: UL94 V-0 rating
• Moisture Sensitivity: MSL 1 (Unlimited)
• Regulatory Compliance: RoHS and REACH status

The five substitute parts identified—TE Connectivity AMPLIMITE HD-20 series (3-106506-2, 6-106506-2, 8-106506-2) and Amphenol ICC Delta D series (D15S13A4GV00LF, D15S13A4GX00LF)—maintain these core electrical and mechanical parameters. Variations in contact material, shell finish, current rating per contact, and operating temperature upper limits are secondary considerations that do not prevent functional substitution within the specified parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

All five substitute parts maintain active product status and meet the core electrical and mechanical requirements for direct substitution with the HARTING 09662536613. Selection among substitutes should be based on the following criteria:

TE Connectivity AMPLIMITE HD-20 Series (3-106506-2, 6-106506-2, 8-106506-2): These parts are suitable for applications operating within -55°C to 105°C and 125V maximum. The TE parts offer gold-plated contacts and tin-plated steel shells. Packaging options include tray (3-106506-2) and bulk (6-106506-2, 8-106506-2). The primary distinction between 6-106506-2 and 8-106506-2 is the flange feature: 6-106506-2 uses housing/shell mounting, while 8-106506-2 uses mating-side female screwlock. Current rating is 6A, which is compatible with the HARTING specification of 6.5A.

Amphenol ICC Delta D Series (D15S13A4GV00LF, D15S13A4GX00LF): These parts are suitable for applications requiring extended operating temperature range (-55°C to 125°C) and higher voltage rating (300V). Both parts feature tin-nickel plated steel shells and gold-plated contacts. The distinction is flange feature: D15S13A4GV00LF uses mating-side female screwlock, while D15S13A4GX00LF uses housing/shell mounting. Current rating is 5A per contact. These parts are preferred when the full temperature range and higher voltage rating of the HARTING original are required.

All substitute parts are RoHS compliant and carry UL94 V-0 flammability ratings. REACH compliance status varies; the Amphenol parts maintain REACH Unaffected status matching the original.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity AMPLIMITE HD-20 parts directly replace the HARTING 09662536613?

A: Yes, the TE parts maintain the same 15-position D-Sub receptacle configuration, shell size (2 DA/A), right-angle through-hole solder termination, and UL94 V-0 flammability rating. The primary limitation is the reduced operating temperature upper limit (105°C versus 125°C) and lower voltage rating (125V versus unspecified). These differences are acceptable for applications not requiring the extended temperature range.

Q: What is the difference between TE 6-106506-2 and TE 8-106506-2?

A: Both parts are electrically and mechanically identical 15-position D-Sub receptacles in the AMPLIMITE HD-20 series with identical current ratings (6A) and operating temperature range (-55°C to 105°C). The difference is the flange feature: 6-106506-2 has housing/shell mounting (4-40), while 8-106506-2 has mating-side female screwlock (4-40). Selection depends on the specific mounting requirement of the application.

Q: Should I use Amphenol D15S13A4GV00LF or D15S13A4GX00LF?

A: Both Amphenol parts are functionally equivalent with identical electrical specifications, operating temperature range (-55°C to 125°C), and voltage rating (300V). The difference is the flange feature: D15S13A4GV00LF uses mating-side female screwlock (4-40), while D15S13A4GX00LF uses housing/shell mounting (4-40). Choose based on your application's mounting configuration.

Q: What is the current rating difference between the HARTING original (6.5A) and substitute parts?

A: The TE Connectivity parts are rated at 6A, and the Amphenol parts are rated at 5A per contact. Both ratings are within acceptable operating margins for most applications. If your design requires the full 6.5A rating, verify that the substitute part's 6A or 5A rating does not exceed your application's actual current requirements.

Q: Are all substitute parts RoHS compliant?

A: Yes, all five substitute parts are RoHS compliant. The HARTING original is ROHS3 compliant, while the TE and Amphenol parts are RoHS compliant. Both certifications meet current regulatory requirements.

Q: What packaging options are available for the substitute parts?

A: TE Connectivity 3-106506-2 is supplied in tray packaging. TE Connectivity 6-106506-2 and 8-106506-2 are supplied in bulk packaging. Amphenol D15S13A4GV00LF and D15S13A4GX00LF are supplied in tray packaging. The HARTING original is supplied in bulk packaging.

Q: Can I use these substitute parts in high-temperature applications?

A: The TE Connectivity AMPLIMITE HD-20 series is rated to 105°C maximum. For applications requiring the full -55°C to 125°C operating range, use the Amphenol Delta D series (D15S13A4GV00LF or D15S13A4GX00LF), which matches the HARTING original's temperature specification.