HARTING 09662527613 D-Sub Receptacle 15-Position Right Angle Solder Connector

Part Overview

The HARTING 09662527613 is a 15-position D-Sub receptacle connector with female sockets, configured for right-angle through-hole solder termination. This connector is designed for applications requiring reliable signal transmission in industrial and commercial equipment. The part is currently active in production with 1066 units in stock. Equivalent substitute parts are necessary to address supply chain flexibility, packaging preferences, or specific application requirements while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Manufacturer Part Number	09662527613
Manufacturer	HARTING
Connector Type	Receptacle, Female Sockets
Number of Positions	15
Number of Rows	2
Shell Size, Connector Layout	2 (DA, A)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Flange Feature	Mating Side, Female Screwlock (4-40)
Current Rating	6.5A
Operating Temperature Range	-55°C to 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09662527613 are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Core Compatibility Criteria:

Connector type: Receptacle, female sockets
Number of positions: 15
Number of rows: 2
Shell size and layout: 2 (DA, A)
Mounting type: Through hole, right angle
Termination method: Solder
Flange feature: Mating side, female screwlock (4-40)
Material flammability rating: UL94 V-0
Moisture sensitivity level: 1 (Unlimited)

Acceptable Parameter Variations:

Current rating: 5A to 6.5A (all substitutes rated 5A to 6A meet or approach the original specification)
Operating temperature range: -55°C to 105°C or -55°C to 125°C (both acceptable for the specified range)
Contact finish: Gold or unspecified (does not affect core functionality)
Shell material finish: Steel with tin plating or unspecified (compatible with original)
Packaging: Bulk or tray (does not affect component performance)
RoHS status: RoHS Compliant or ROHS3 Compliant (both meet regulatory requirements)

The five substitute parts listed below meet all core compatibility criteria and are electrically and mechanically interchangeable with the HARTING 09662527613.

Parameter Comparison

Parameter	HARTING 09662527613	TE 3-106506-2	TE 6-106506-2	TE 8-106506-2	Amphenol D15S13A4GV00LF	Amphenol D15S13A4GX00LF
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	15	15	15	15	15	15
Number of Rows	2	2	2	2	2	2
Shell Size, Connector Layout	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)
Mounting Type	Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder
Flange Feature	Mating Side, Female Screwlock (4-40)	Mating Side, Female Screwlock (4-40)	Housing/Shell (4-40)	Mating Side, Female Screwlock (4-40)	Mating Side, Female Screwlock (4-40)	Housing/Shell (4-40)
Current Rating	6.5A	6A	6A	6A	5A per Contact	5A per Contact
Operating Temperature Range	-55°C to 125°C	-55°C to 105°C	-55°C to 105°C	-55°C to 105°C	-55°C to 125°C	-55°C to 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging	Bulk	Tray	Bulk	Bulk	Tray	Tray
Inventory Status	1066 Pcs In Stock	2768 Pcs In Stock	773 Pcs In Stock	1105 Pcs In Stock	1900 Pcs In Stock	2370 Pcs In Stock

Engineering Selection Recommendations

All five substitute parts are active production components with full regulatory compliance. Selection between the HARTING 09662527613 and its substitutes depends on specific application requirements and supply chain considerations:

TE Connectivity AMPLIMITE HD-20 Series (3-106506-2, 6-106506-2, 8-106506-2): These parts are suitable for applications where the operating temperature range of -55°C to 105°C is acceptable. The TE parts feature gold-plated contacts and tin-plated steel shells. Part 3-106506-2 is supplied in tray packaging, while 6-106506-2 and 8-106506-2 are supplied in bulk. The primary distinction between 6-106506-2 and 8-106506-2 is the flange feature: 6-106506-2 uses housing/shell mounting, while 8-106506-2 uses mating side female screwlock. All three TE parts carry RoHS compliance certification.

Amphenol ICC Delta D Series (D15S13A4GV00LF, D15S13A4GX00LF): These parts are suitable for applications requiring the full -55°C to 125°C operating temperature range, matching the original HARTING specification. Both Amphenol parts feature gold-plated contacts with flash thickness and tin-nickel plated steel shells. The primary distinction is the flange feature: D15S13A4GV00LF uses mating side female screwlock, while D15S13A4GX00LF uses housing/shell mounting. Both include board lock and mounting brackets. Both carry RoHS compliance and REACH unaffected status.

Selection Criteria:

For applications requiring -55°C to 125°C operation, select Amphenol D15S13A4GV00LF or D15S13A4GX00LF
For applications with -55°C to 105°C operating range, TE Connectivity parts offer equivalent functionality
For mating side female screwlock flange requirement, select HARTING 09662527613, TE 3-106506-2, TE 8-106506-2, or Amphenol D15S13A4GV00LF
For housing/shell flange requirement, select TE 6-106506-2 or Amphenol D15S13A4GX00LF
For tray packaging, select TE 3-106506-2, Amphenol D15S13A4GV00LF, or Amphenol D15S13A4GX00LF
For bulk packaging, select HARTING 09662527613, TE 6-106506-2, or TE 8-106506-2

Frequently Asked Questions (FAQ)

Q: Can I use a TE Connectivity part rated for -55°C to 105°C in an application requiring -55°C to 125°C operation? A: No. If your application requires operation at temperatures above 105°C, you must select either the original HARTING 09662527613 or the Amphenol D15S13A4GV00LF or D15S13A4GX00LF, which are rated to 125°C.

Q: What is the difference between the flange features listed for these connectors? A: The flange feature determines how the connector is mounted to the mating connector or panel. Mating side female screwlock (4-40) means the mounting screws are on the mating side of the connector. Housing/shell (4-40) means the mounting screws are on the housing or shell. Both are mechanically compatible with standard D-Sub mating connectors; selection depends on your specific panel or backplane design.

Q: Are the TE Connectivity and Amphenol parts electrically interchangeable with the HARTING 09662527613? A: Yes, all substitute parts are electrically interchangeable. They share the same 15-position, 2-row D-Sub configuration, solder termination, and UL94 V-0 flammability rating. Current ratings range from 5A to 6.5A per contact, which is acceptable for most applications. Verify your specific current requirements before selection.

Q: Does packaging (bulk vs. tray) affect connector performance? A: No. Packaging affects only handling, storage, and ordering logistics. Bulk and tray packaging contain identical connectors and do not affect electrical or mechanical performance.

Q: Are all these parts RoHS compliant? A: Yes. All substitute parts carry either RoHS Compliant or ROHS3 Compliant certification, meeting current regulatory requirements for lead-free and restricted substance compliance.

Q: What is the significance of the contact finish (gold vs. unspecified)? A: Gold plating improves corrosion resistance and contact reliability in high-reliability applications. The TE and Amphenol parts feature gold-plated contacts, while the original HARTING part does not specify contact finish. For applications in corrosive environments or requiring extended service life, gold-plated contacts are preferred.

Q: Can I mix and match these connectors in the same application? A: Yes, provided all connectors in your system meet the most stringent requirements of your application. If any circuit requires -55°C to 125°C operation, all connectors in that circuit must be rated to 125°C. If all circuits operate within -55°C to 105°C, TE parts are acceptable throughout.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message