HARTING 09662117501 D-Sub Receptacle 15-Position Equivalent & Substitute Parts

Part Overview

The HARTING 09662117501 is a 15-position D-Sub receptacle connector with female sockets, designed for through-hole vertical solder termination. This connector is classified as Active product status and is ROHS3 compliant. Equivalent and substitute parts are identified when design requirements permit variations in mounting configuration, flange design, contact material composition, or current rating specifications while maintaining core electrical and mechanical compatibility within the D-Sub 15-position, 2-row category.

Substiute Parts

09662117501

HARTINGIn Stock: 86709662117501 Datasheet

Current PartRFQ

171-015-213R011

NorComp Inc.In Stock: 1150171-015-213R011 Datasheet

MFR RecommendedRFQ

171-015-213R021

NorComp Inc.In Stock: 7056171-015-213R021 Datasheet

MFR RecommendedRFQ

171-015-213R031

NorComp Inc.In Stock: 1256171-015-213R031 Datasheet

MFR RecommendedRFQ

171-015-213R911

NorComp Inc.In Stock: 3316171-015-213R911 Datasheet

MFR RecommendedRFQ

DLS2XS4AA35X

Amphenol CONECIn Stock: 12769DLS2XS4AA35X Datasheet

MFR RecommendedRFQ

SDAB-15S(55)

Hirose Electric Co LtdIn Stock: 2388SDAB-15S(55) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09662117501 are qualified based on the following mandatory parameters:

Core Compatibility Parameters:

• Connector Type: Receptacle, Female Sockets
• Number of Positions: 15
• Number of Rows: 2
• Shell Size, Connector Layout: 2 (DA, A)
• Termination: Solder
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant or RoHS Compliant

Allowed Variation Parameters:

• Manufacturer: Different manufacturers permitted
• Mounting Type: Through Hole or Panel Mount, Through Hole
• Flange Feature: Housing/Shell, Board Side, or Mating Side configurations
• Shell Material Finish: Steel variations with different plating (Nickel, Tin)
• Contact Material: Copper Alloy, Brass, or Phosphor Bronze
• Contact Finish: Gold or unspecified
• Current Rating: 3A to 6.5A
• Operating Temperature: -55°C to 125°C range
• Packaging: Bulk or Tray

The NorComp Inc. 171 series parts (171-015-213R011, 171-015-213R021, 171-015-213R031, 171-015-213R911) are qualified as substitutes with panel mount capability. The Amphenol CONEC DLS2XS4AA35X and Hirose Electric SDAB-15S(55) are qualified as through-hole vertical mount alternatives with comparable electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status and comply with RoHS directives, ensuring long-term availability and regulatory alignment. The NorComp 171 series (171-015-213R011, 171-015-213R021, 171-015-213R031, 171-015-213R911) are suitable for applications requiring panel mount configurations while maintaining solder termination and UL94 V-0 flammability compliance. The 171-015-213R911 variant includes board lock features for enhanced mechanical retention.

The Amphenol CONEC DLS2XS4AA35X maintains through-hole vertical mounting identical to the HARTING 09662117501 and includes board lock features. This part operates within the -55°C to 105°C range and provides IP20 ingress protection. Current rating is reduced to 3A.

The Hirose Electric SDAB-15S(55) offers panel mount capability with 350V voltage rating and operates with 3A current rating. This part is RoHS compliant and maintains UL94 V-0 flammability rating.

Selection between substitutes depends on specific mounting requirements, current capacity needs, and operating temperature specifications of the target application.

Frequently Asked Questions (FAQ)

Q: Can the NorComp 171-015-213R011 replace the HARTING 09662117501 in a through-hole vertical mount application?

A: The NorComp 171-015-213R011 supports both panel mount and through-hole mounting configurations. However, verify that the board-side flange design (4-40) is compatible with your PCB layout. The part maintains identical 15-position, 2-row D-Sub configuration and solder termination.

Q: What is the difference between NorComp 171-015-213R011, 171-015-213R021, and 171-015-213R031?

A: All three parts are electrically and mechanically identical 15-position D-Sub receptacles with panel mount and through-hole capability. The primary difference is flange location: 171-015-213R011 and 171-015-213R021 feature board-side flanges (4-40), while 171-015-213R031 features a mating-side flange (4-40). Selection depends on connector orientation and mounting surface requirements.

Q: Does the Amphenol CONEC DLS2XS4AA35X have reduced current capacity compared to the HARTING 09662117501?

A: Yes. The DLS2XS4AA35X is rated for 3A maximum current, compared to the HARTING 09662117501 rated at 6.5A. This part is suitable only for applications with current requirements not exceeding 3A per contact.

Q: What is the significance of the board lock feature in the NorComp 171-015-213R911?

A: The board lock feature provides mechanical retention between the connector and PCB, preventing accidental disconnection during handling or vibration. This feature is present in the 171-015-213R911 variant and the Amphenol CONEC DLS2XS4AA35X.

Q: Are all substitute parts ROHS3 compliant?

A: The NorComp 171 series and Amphenol CONEC DLS2XS4AA35X are ROHS3 compliant. The Hirose Electric SDAB-15S(55) is RoHS compliant. Both compliance levels meet regulatory requirements for electronic component use in most jurisdictions.

Q: What packaging formats are available for these substitute parts?

A: The HARTING 09662117501 and Amphenol CONEC DLS2XS4AA35X are supplied in Bulk packaging. The NorComp 171 series and Hirose Electric SDAB-15S(55) are supplied in Tray packaging. Confirm packaging requirements with procurement specifications.