HARTING 09661237802 D-Sub Plug 9-Position Right Angle Solder Connector

Part Overview

The HARTING 09661237802 is a 9-position D-Sub plug connector with right-angle through-hole solder termination. This connector is designed for applications requiring reliable signal transmission in industrial and commercial environments. The part is currently active in production with 819 units in stock. Equivalent and substitute parts are identified based on matching electrical and mechanical specifications to support procurement flexibility and supply chain continuity.

Substiute Parts

09661237802

HARTINGIn Stock: 83909661237802 Datasheet

Current PartRFQ

1218440-1

TE Connectivity Aerospace, Defense and MarineIn Stock: 7261218440-1 Datasheet

MFR RecommendedRFQ

DE09P564CTXLF

Amphenol ICC (FCI)In Stock: 953DE09P564CTXLF Datasheet

MFR RecommendedRFQ

DE09P565CTXLF

Amphenol ICC (FCI)In Stock: 1463DE09P565CTXLF Datasheet

MFR RecommendedRFQ

DE09P565MTXLF

Amphenol ICC (FCI)In Stock: 815DE09P565MTXLF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09661237802 are qualified based on the following critical parameters:

• Connector Configuration: 9-position D-Sub plug with male pins, 2-row layout, shell size 1 (DE, E)
• Mounting and Termination: Through-hole right-angle solder termination
• Electrical Performance: Signal contact type with compatible current and temperature ratings
• Environmental Compliance: Operating temperature range -55°C to 125°C, MSL 1 (Unlimited)
• Regulatory Status: Active product status with appropriate RoHS and REACH compliance

The following parts meet these substitution criteria: DE09P565CTXLF, DE09P565MTXLF, 1218440-1, and DE09P564CTXLF.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Recommended for New Designs)

Amphenol ICC DE09P565CTXLF and DE09P565MTXLF are the preferred substitutes. Both parts maintain ROHS3 compliance matching the original HARTING 09661237802, feature identical shell size and backset spacing (0.409" / 10.40mm), and support the full operating temperature range. DE09P565MTXLF includes mounting brackets as an additional feature. Both parts are actively produced with substantial inventory availability.

Secondary Substitute (Current Rating Consideration)

Amphenol ICC DE09P564CTXLF is functionally equivalent with RoHS compliance and UL94 V-0 flammability rating. This part maintains identical backset spacing and mounting configuration. Current rating is specified as 5A per contact, which is lower than the original 7.5A specification.

Alternative Substitute (Compliance Limitation)

TE Connectivity 1218440-1 meets the core mechanical and electrical substitution criteria with identical shell size and operating temperature range. This part is specified for military applications under MIL-DTL-24308 and AMPLIMITE 109 series. However, this part is RoHS non-compliant and carries cadmium plating, which may restrict use in applications with environmental or regulatory requirements. Backset spacing differs at 0.318" (8.08mm) compared to the original 0.409" (10.40mm).

Frequently Asked Questions (FAQ)

Q: Can DE09P565CTXLF directly replace HARTING 09661237802 in existing designs?

A: Yes. Both parts share identical shell size (1 / DE, E), backset spacing (0.409" / 10.40mm), mounting type (through-hole right angle), and termination method (solder). Operating temperature range and MSL rating are identical. Both are ROHS3 compliant. Physical and electrical compatibility is confirmed.

Q: What is the difference between DE09P565CTXLF and DE09P565MTXLF?

A: Both parts are electrically and mechanically identical. DE09P565MTXLF includes mounting brackets as an additional feature. Selection depends on whether the application requires integrated mounting hardware.

Q: Why is the current rating different for some substitutes?

A: The original HARTING 09661237802 is rated at 7.5A, while Amphenol ICC and TE Connectivity substitutes are rated at 5A. Current rating is determined by contact design and material composition. Applications requiring current levels above 5A should confirm compatibility with the substitute part's electrical specifications.

Q: Is TE Connectivity 1218440-1 suitable for new designs?

A: TE Connectivity 1218440-1 meets core mechanical substitution criteria but carries RoHS non-compliance status. This part is appropriate for legacy system maintenance or military applications where MIL-DTL-24308 compliance is required. New designs should prioritize ROHS3-compliant alternatives such as DE09P565CTXLF or DE09P565MTXLF.

Q: What does backset spacing mean, and why does it matter?

A: Backset spacing is the distance from the connector mounting face to the contact centerline. The original part specifies 0.409" (10.40mm). Most substitutes maintain this spacing. TE Connectivity 1218440-1 differs at 0.318" (8.08mm), which may affect PCB layout compatibility. Verify backset spacing against your application's mechanical design before substitution.

Q: Are all substitute parts actively produced?

A: Yes. All listed substitutes maintain active product status. Inventory levels vary: DE09P565CTXLF has the highest availability at 1448 units, followed by DE09P564CTXLF at 876 units, DE09P565MTXLF at 707 units, and TE Connectivity 1218440-1 at 704 units.