Request Quote
(Ships tomorrow)
HARTING 09654696713 D-Sub 37-Position Plug Connector – Equivalent & Substitute Parts
Part Overview
The HARTING 09654696713 is a 37-position D-Sub plug connector with male pins, vertical through-hole mounting, and solder termination. This connector is designed for signal applications requiring robust mechanical and electrical performance across industrial temperature ranges. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity rating.
Substitute parts are identified to provide design flexibility, accommodate supply chain variations, and support applications where alternative mounting configurations or material specifications are acceptable within the defined electrical and mechanical parameters.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Connector Type | D-Sub Plug, Male Pins |
| Number of Positions | 37 |
| Shell Size / Layout | 4 (DC, C) |
| Mounting Type | Through Hole |
| Termination Method | Solder |
| Current Rating | 6.5A |
| Operating Temperature Range | -55°C to 125°C |
| Material Flammability | UL94 V-0 |
| Contact Finish | Gold |
| RoHS Status | ROHS3 Compliant |
Substitute Part Grouping Explanation
Substitute parts for the HARTING 09654696713 are grouped based on strict equivalence in the following critical parameters:
- Connector Type & Position Count: All substitutes maintain 37-position D-Sub plug configuration with male pins
- Shell Size & Layout: All maintain 4 (DC, C) shell size and row configuration
- Termination Method: All use solder termination
- Mounting Configuration: Substitutes include through-hole vertical mounting (primary equivalents) and panel-mount through-hole variants
- Current & Voltage Ratings: Substitutes rated at 5A to 6.5A; voltage ratings range from unspecified to 125V
- Operating Temperature: Substitutes operate within -50°C to -55°C minimum and 100°C to 125°C maximum
- Compliance: All substitutes maintain UL94 V-0 flammability rating and ROHS3 or equivalent compliance status
Substitutes are divided into two functional groups:
Group 1 – Through-Hole Vertical Mount (Direct Equivalents) TE Connectivity AMPLIMITE HD-20 series (208009-1, 5208009-1, 5208009-3, 5745074-1, 5745074-4, 745054-4, 745074-2, 745074-4) provide direct mechanical and electrical equivalence with vertical through-hole mounting identical to the main part.
Group 2 – Panel Mount Through-Hole (Functional Equivalents) NorComp 172-E series (172-E37-113R011, 172-E37-113R911) provide electrical equivalence with panel-mount through-hole configuration, suitable for applications where board-side flange mounting is required.
Parameter Comparison
| Parameter | HARTING 09654696713 | NorComp 172-E37-113R011 | NorComp 172-E37-113R911 | TE 208009-1 | TE 5208009-1 | TE 5208009-3 | TE 5745074-1 | TE 5745074-4 | TE 745054-4 | TE 745074-2 | TE 745074-4 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Connector Type | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male | D-Sub Plug, Male |
| Positions | 37 | 37 | 37 | 37 | 37 | 37 | 37 | 37 | 37 | 37 | 37 |
| Shell Size | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) |
| Mounting Type | Through Hole Vertical | Panel Mount, Through Hole | Panel Mount, Through Hole | Through Hole Vertical | Through Hole Vertical | Through Hole Vertical | Through Hole Vertical | Through Hole Vertical | Through Hole Vertical | Through Hole Vertical | Through Hole Vertical |
| Termination | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder |
| Current Rating (A) | 6.5 | 5 | 5 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| Voltage Rating (V) | Not specified | Not specified | Not specified | 125 | 125 | 125 | 125 | 125 | 125 | 125 | 125 |
| Operating Temperature (°C) | -55 to 125 | -50 to 100 | -50 to 100 | -55 to 105 | -55 to 105 | -55 to 105 | -55 to 105 | -55 to 105 | -55 to 105 | -55 to 105 | -55 to 105 |
| Contact Finish | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold |
| Material Flammability | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | RoHS Non-compliant | ROHS3 Compliant | ROHS3 Compliant | RoHS Compliant | ROHS3 Compliant | ROHS3 Compliant | RoHS Non-compliant | RoHS Non-compliant |
| Product Status | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
Engineering Selection Recommendations
Direct Equivalents (Preferred for Vertical Through-Hole Applications)
TE Connectivity AMPLIMITE HD-20 series parts 5208009-1, 5208009-3, 5745074-4, and 745054-4 are recommended as primary substitutes. These parts maintain identical through-hole vertical mounting configuration, meet or exceed current ratings (6A), and carry ROHS3 compliance status matching the main part specification. Parts 5208009-1 and 5208009-3 provide the broadest compliance profile with ROHS3 certification and REACH unaffected status.
Functional Equivalents (Panel Mount Applications)
NorComp 172-E37-113R011 and 172-E37-113R911 are suitable for applications requiring panel-mount through-hole configuration. Both maintain 37-position D-Sub plug architecture with solder termination and ROHS3 compliance. The 172-E37-113R911 variant includes board-side and mating-side flange features, providing enhanced mechanical retention. Current rating of 5A is acceptable for applications not requiring the full 6.5A capacity of the main part.
Compliance Considerations
Applications subject to ROHS3 mandate should prioritize TE Connectivity 5208009-1, 5208009-3, 5745074-4, and NorComp 172-E series parts. TE parts 208009-1, 745074-2, and 745074-4 carry RoHS non-compliant or RoHS compliant (non-ROHS3) status and are suitable only for applications without ROHS3 requirement.
Temperature Range Limitations
NorComp 172-E series parts operate to 100°C maximum, limiting use in applications requiring the full -55°C to 125°C range of the main part. TE Connectivity AMPLIMITE HD-20 series maintains -55°C to 105°C range, providing adequate coverage for most industrial applications.
Frequently Asked Questions (FAQ)
Q: Can NorComp 172-E37 panel-mount connectors be used as direct replacements for the HARTING 09654696713 in vertical through-hole applications?
A: No. NorComp 172-E37 parts feature panel-mount through-hole configuration with board-side flanges, requiring different PCB layout and mounting hole patterns than the vertical through-hole design of the HARTING part. Mechanical compatibility cannot be assumed without PCB redesign.
Q: What is the current rating difference between the main part (6.5A) and NorComp substitutes (5A)?
A: The HARTING 09654696713 is rated for 6.5A continuous current, while NorComp 172-E37 parts are rated for 5A. Substitution is acceptable only in applications where maximum current demand does not exceed 5A. Verify actual circuit requirements before selection.
Q: Are all TE Connectivity AMPLIMITE HD-20 variants electrically interchangeable?
A: All TE Connectivity AMPLIMITE HD-20 series parts listed maintain identical 37-position D-Sub plug configuration, solder termination, and 6A current rating. Differences exist in flange features (housing/shell unthreaded vs. mating-side female screwlock), shell material finish specifications, and RoHS compliance status. Verify flange feature compatibility with mating connector before substitution.
Q: Which substitute parts meet ROHS3 compliance?
A: ROHS3-compliant substitutes are NorComp 172-E37-113R011, NorComp 172-E37-113R911, TE 5208009-1, TE 5208009-3, TE 5745074-4, and TE 745054-4. TE 208009-1, TE 745074-2, and TE 745074-4 do not meet ROHS3 requirements.
Q: What is the significance of the flange feature differences in TE AMPLIMITE HD-20 parts?
A: Flange features determine mechanical mating interface. Parts with "Housing/Shell (Unthreaded)" flanges mate with standard D-Sub receptacles. Parts with "Mating Side, Female Screwlock (4-40)" flanges provide threaded screw-lock mating for enhanced mechanical retention. Verify mating connector specification before selection.
Q: Can the HARTING 09654696713 be substituted with TE 208009-1 in new designs?
A: TE 208009-1 is electrically and mechanically compatible but carries RoHS non-compliant status and REACH affected designation. Use only in applications without RoHS3 or REACH compliance requirements. For new designs, ROHS3-compliant alternatives (TE 5208009-1, 5208009-3, 5745074-4) are recommended.
Q: Are contact material differences (copper alloy vs. brass) significant for substitution?
A: The HARTING 09654696713 uses copper alloy contacts; TE and NorComp substitutes use brass contacts. Both materials provide equivalent electrical conductivity and gold plating compatibility. Substitution is acceptable from an electrical standpoint. Verify mechanical contact retention specifications if critical to application.
Q: What packaging format differences exist among substitutes?
A: HARTING 09654696713 is supplied in bulk packaging. NorComp 172-E37 parts are supplied in trays. TE Connectivity AMPLIMITE HD-20 series parts are supplied in tubes. Packaging format does not affect electrical or mechanical performance but may impact inventory management and handling procedures.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts