HARTING 09653626815 D-Sub Plug 25 Position Right Angle Solder Connector

Part Overview

The HARTING 09653626815 is a 25-position D-Sub plug connector with right-angle through-hole solder termination. This connector is designed for applications requiring reliable signal transmission in industrial and commercial environments. The part is currently active in production with 768 units in stock. Equivalent and substitute parts are identified based on matching electrical and mechanical specifications to support procurement flexibility, inventory management, and supply chain continuity.

Key Parameters

Parameter	Value
Connector Type	D-Sub Plug, Male Pins
Number of Positions	25
Shell Size	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A - 6.5A
Operating Temperature Range	-55°C to 125°C
Shell Material	Steel
Contact Material	Copper Alloy or Brass
RoHS Compliance	ROHS3 Compliant or Non-Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09653626815 is determined by the following critical parameters:

Connector Configuration: All substitutes must be 25-position D-Sub plugs with male pins and shell size 3 (DB, B)
Mounting and Termination: Right-angle through-hole solder termination is required
Electrical Performance: Current rating of 5A minimum; operating temperature range of -55°C to 125°C or equivalent
Mechanical Compatibility: Steel shell construction with solder-compatible contact materials

The three identified substitutes meet these core requirements. Variations in backset spacing, contact finish, flange features, and compliance certifications are secondary parameters that may influence selection based on application-specific requirements.

Parameter Comparison

Parameter	HARTING 09653626815	TE Connectivity 1218440-3	NorComp 774-E25-113R001	NorComp 774-E25-113R141
Connector Type	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins
Number of Positions	25	25	25	25
Shell Size	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle	Panel Mount, Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder
Current Rating (Amps)	6.5A	5A	5A	5A
Backset Spacing	0.409" (10.40mm)	0.318" (8.08mm)	0.370" (9.40mm)	0.370" (9.40mm)
Shell Material, Finish	Steel	Steel, Cadmium Plated	Steel, Nickel Plated	Steel, Nickel Plated
Contact Material	Copper Alloy	Brass	Brass	Brass
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-50°C ~ 100°C	-50°C ~ 100°C
RoHS Status	ROHS3 Compliant	RoHS Non-Compliant	ROHS3 Compliant	ROHS3 Compliant
Ingress Protection	Not Specified	Not Specified	IP67	IP67

Engineering Selection Recommendations

HARTING 09653626815 remains the primary specification. This part is ROHS3 compliant, REACH unaffected, and maintains the highest current rating of 6.5A with full operating temperature range of -55°C to 125°C.

TE Connectivity 1218440-3 is suitable for applications where RoHS non-compliance is acceptable and military-grade specifications (MIL-DTL-24308) are required. This part maintains the full -55°C to 125°C operating range and 5A current rating. Backset spacing of 0.318" (8.08mm) differs from the primary part and must be verified for PCB layout compatibility.

NorComp 774-E25-113R001 and 774-E25-113R141 are ROHS3 compliant alternatives with IP67 ingress protection, suitable for sealed or environmentally protected applications. Both parts operate within -50°C to 100°C range and provide 5A current rating. The 0.370" (9.40mm) backset spacing differs from the primary part. The 774-E25-113R141 includes female screwlock mating-side connectors and mounting brackets, providing additional mechanical retention features.

Selection between substitutes depends on compliance requirements, environmental protection needs, and PCB layout constraints related to backset spacing variations.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity 1218440-3 replace HARTING 09653626815 in all applications?

A: The TE Connectivity part meets core electrical and mechanical specifications but differs in RoHS compliance status and backset spacing. Verify that your application permits RoHS non-compliant components and that the 0.318" (8.08mm) backset spacing accommodates your PCB layout.

Q: What is the significance of backset spacing differences?

A: Backset spacing determines the distance from the connector mounting surface to the solder contact plane. Variations of 0.318" to 0.409" require PCB layout verification to ensure proper solder joint formation and component clearance. Consult your PCB design specifications before substitution.

Q: Are the NorComp 774-E parts suitable for outdoor or sealed enclosure applications?

A: Yes. Both NorComp parts provide IP67 ingress protection (dust tight, waterproof), making them suitable for sealed or environmentally exposed installations. The HARTING and TE Connectivity parts do not specify ingress protection ratings.

Q: What is the difference between NorComp 774-E25-113R001 and 774-E25-113R141?

A: Both parts share identical electrical and thermal specifications. The 774-E25-113R141 includes female screwlock connectors on the mating side and mounting brackets for enhanced mechanical retention. Select 774-E25-113R141 if your application requires positive locking or additional structural support.

Q: Does operating temperature range affect substitution eligibility?

A: The HARTING and TE Connectivity parts operate to -55°C to 125°C. NorComp parts operate to -50°C to 100°C. If your application requires operation below -50°C or above 100°C, the NorComp substitutes are not suitable.

Q: What packaging formats are available?

A: HARTING 09653626815 is supplied in bulk packaging. TE Connectivity 1218440-3 is supplied in bulk. NorComp 774-E25-113R001 and 774-E25-113R141 are supplied in tray packaging. Verify packaging compatibility with your receiving and assembly processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message