HARTING 09652637813 D-Sub Plug 15 Position Right Angle Solder Connector

Part Overview

The HARTING 09652637813 is a 15-position D-Sub plug connector with right-angle through-hole solder termination. This connector is designed for signal applications requiring robust mechanical and electrical performance in industrial and commercial equipment. The part is currently active in production with 689 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required, or when design requirements allow for compatible alternatives from different manufacturers that meet the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Manufacturer Part Number	09652637813
Manufacturer	HARTING
Connector Type	D-Sub Plug, Male Pins
Number of Positions	15
Number of Rows	2
Shell Size, Connector Layout	2 (DA, A)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	6.5A
Operating Temperature Range	-55°C to 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09652637813 is determined by the following critical parameters:

Connector Configuration: 15-position D-Sub plug with male pins, 2-row layout, shell size 2 (DA, A)
Mounting and Termination: Through-hole right-angle solder termination
Electrical Performance: Current rating of 6.0A or higher; operating temperature range of -55°C to 125°C or equivalent
Mechanical Compatibility: Backset spacing within 0.409" ± tolerance; flange feature compatibility with mating receptacles
Regulatory Compliance: UL94 V-0 flammability rating; RoHS3 compliance; REACH compliance status

The substitute parts listed below meet these core substitution criteria. Variations in contact finish, shell material finish, dielectric material, and flange feature design are permitted within the scope of D-Sub connector standardization, provided electrical and mechanical performance requirements are maintained.

Parameter Comparison

Parameter	HARTING 09652637813	TE Connectivity 1-338169-2	TE Connectivity 5745435-8	Amphenol D15P13A4GL00LF	Amphenol D15P13A4GV00LF	Amphenol D15P13A4GX00LF
Connector Type	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins
Number of Positions	15	15	15	15	15	15
Number of Rows	2	2	2	2	2	2
Shell Size, Connector Layout	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	6.5A	6A	6A	5A per Contact	5A per Contact	5A per Contact
Backset Spacing	0.409" (10.40mm)	0.406" (10.30mm)	0.454" (11.53mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)
Operating Temperature Range	-55°C to 125°C	-55°C to 105°C	-55°C to 105°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	Vendor Undefined	REACH Unaffected	REACH Unaffected	REACH Affected

Engineering Selection Recommendations

TE Connectivity 1-338169-2 (AMPLIMITE HD-20 Series): This substitute is suitable for applications where the operating temperature requirement does not exceed 105°C. The part maintains ROHS3 compliance and REACH unaffected status. Current rating of 6A is acceptable for most signal applications. Backset spacing of 0.406" is within acceptable tolerance for standard D-Sub receptacle mating.

TE Connectivity 5745435-8 (AMPLIMITE HDP-20 Series): This substitute is suitable for applications where the operating temperature requirement does not exceed 105°C. The part is RoHS compliant with vendor-undefined REACH status. Current rating of 6A is acceptable. Backset spacing of 0.454" represents a notable deviation and requires confirmation of receptacle compatibility before selection.

Amphenol D15P13A4GL00LF (Delta D Series): This substitute maintains full operating temperature range compatibility (-55°C to 125°C) and REACH unaffected status. Current rating of 5A per contact is lower than the primary part and must be evaluated against circuit requirements. Backset spacing of 0.409" matches the primary part exactly.

Amphenol D15P13A4GV00LF (Delta D Series): This substitute maintains full operating temperature range compatibility (-55°C to 125°C) and REACH unaffected status. Current rating of 5A per contact is lower than the primary part and must be evaluated against circuit requirements. Backset spacing of 0.409" matches the primary part exactly. Flange feature is mating-side female screwlock, identical to the primary part.

Amphenol D15P13A4GX00LF (Delta D Series): This substitute maintains full operating temperature range compatibility (-55°C to 125°C) and ROHS3 compliance. REACH status is affected, which may require additional documentation for certain regulated markets. Current rating of 5A per contact is lower than the primary part and must be evaluated against circuit requirements. Backset spacing of 0.409" matches the primary part exactly.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a lower current rating than the primary part?

A: Current rating substitution depends on your circuit design. The HARTING 09652637813 is rated at 6.5A, while the Amphenol Delta D series substitutes are rated at 5A per contact. If your application requires current handling above 5A per contact, the Amphenol parts are not suitable. TE Connectivity substitutes rated at 6A are acceptable for applications requiring up to 6A per contact.

Q: What is the significance of backset spacing differences?

A: Backset spacing determines the distance from the connector flange to the solder cup. The primary part and most substitutes specify 0.409" (10.40mm). The TE Connectivity 5745435-8 specifies 0.454" (11.53mm), which is a significant deviation. This difference may affect PCB layout and receptacle mating alignment. Confirm receptacle compatibility before selecting this part.

Q: Are all substitute parts ROHS3 compliant?

A: No. The HARTING primary part and Amphenol D15P13A4GX00LF are ROHS3 compliant. TE Connectivity 1-338169-2 is ROHS3 compliant. TE Connectivity 5745435-8 and Amphenol D15P13A4GL00LF and D15P13A4GV00LF are RoHS compliant but not specifically ROHS3 certified. Verify compliance requirements for your application.

Q: What is the difference between REACH Unaffected and REACH Affected status?

A: REACH Unaffected indicates the part does not contain substances of very high concern (SVHC) listed under REACH regulations. REACH Affected indicates the part may contain SVHC substances and requires additional documentation and compliance verification. For applications subject to REACH regulations, select parts with REACH Unaffected status when possible.

Q: Can I substitute based on packaging format alone?

A: No. While the primary part is supplied in bulk packaging and substitutes are supplied in tray packaging, packaging format does not determine electrical or mechanical compatibility. Substitution must be based on connector configuration, electrical ratings, operating temperature range, and mechanical dimensions as specified in this document.

Q: Which substitute offers the closest match to the primary part?

A: Amphenol D15P13A4GV00LF offers the closest match in terms of operating temperature range (-55°C to 125°C), backset spacing (0.409"), flange feature (mating-side female screwlock), and regulatory compliance (REACH Unaffected). The primary difference is the lower current rating of 5A per contact versus 6.5A for the primary part.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message