HARTING 09652636813 D-Sub 15-Position Right Angle Solder Plug Connector

Part Overview

The HARTING 09652636813 is a 15-position D-Sub plug connector with right-angle through-hole solder termination. This connector is designed for applications requiring reliable signal transmission in industrial and commercial environments. The part is currently active in production with 911 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements shift to alternative manufacturers, or when specific performance characteristics of substitute models better align with application demands. Substitute connectors in this category maintain functional compatibility through matching electrical and mechanical parameters while potentially offering different manufacturing sources, packaging options, or enhanced specifications.

Substiute Parts

09652636813

HARTINGIn Stock: 98609652636813 Datasheet

Current PartRFQ

1-338169-2

TE Connectivity AMP ConnectorsIn Stock: 18401-338169-2 Datasheet

MFR RecommendedRFQ

5745435-8

TE Connectivity AMP ConnectorsIn Stock: 11995745435-8 Datasheet

MFR RecommendedRFQ

D15P13A4GL00LF

Amphenol ICC (FCI)In Stock: 1726D15P13A4GL00LF Datasheet

MFR RecommendedRFQ

D15P13A4GV00LF

Amphenol ICC (FCI)In Stock: 3295D15P13A4GV00LF Datasheet

MFR RecommendedRFQ

D15P13A4GX00LF

Amphenol ICC (FCI)In Stock: 1393D15P13A4GX00LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09652636813 is determined by the following critical parameters:

• Connector Configuration: 15-position D-Sub plug with male pins
• Shell Size: 2 (DA, A) layout
• Mounting: Through-hole, right-angle orientation
• Termination: Solder connection
• Electrical Performance: Current rating of 6A or higher
• Environmental Compliance: UL94 V-0 flammability rating, RoHS compliance, MSL 1

The substitute parts listed below meet these core requirements. Variations in contact material, shell finish, flange design, and voltage rating do not prevent functional substitution when the primary parameters remain constant. Backset spacing differences within manufacturing tolerances (0.406" to 0.454") are acceptable for through-hole applications.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and meet core compliance requirements. Selection among substitutes should be based on the following factors:

TE Connectivity 1-338169-2 (AMPLIMITE HD-20 Series): This part offers ROHS3 compliance and maintains the 6A current rating. The operating temperature range extends to 105°C, which is lower than the primary part. This substitute is suitable for applications where the reduced upper temperature limit does not conflict with system requirements.

TE Connectivity 5745435-8 (AMPLIMITE HDP-20 Series): This part provides ROHS3 compliance with a 6A current rating. The backset spacing of 0.454" differs from the primary part and may require PCB layout verification. The operating temperature range is 105°C maximum. REACH status is vendor-undefined, requiring clarification for applications with REACH compliance mandates.

Amphenol D15P13A4GL00LF (Delta D Series): This part features RoHS compliance with a 5A per contact rating and extended voltage rating of 300V. The operating temperature range matches the primary part at -55°C to 125°C. The M3 flange differs from the primary part's 4-40 female screwlock configuration.

Amphenol D15P13A4GV00LF (Delta D Series): This part matches the primary part's flange configuration (mating side, female screwlock 4-40) and operating temperature range (-55°C to 125°C). RoHS compliance is confirmed with REACH unaffected status. The 5A per contact rating is lower than the primary part's 6.5A specification.

Amphenol D15P13A4GX00LF (Delta D Series): This part offers ROHS3 compliance with a 5A per contact rating and 300V voltage rating. The operating temperature range matches the primary part. REACH status is affected, requiring verification for applications with REACH compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a lower current rating than the primary part?

A: Substitution with lower current ratings is permissible only if the application's actual current draw does not exceed the substitute part's rating. The primary part is rated at 6.5A, while most substitutes are rated at 5A or 6A per contact. System design must confirm that operating current remains within the substitute's specification.

Q: What is the significance of backset spacing differences?

A: Backset spacing is the distance from the connector's rear face to the solder cup centerline. The primary part specifies 0.409" (10.40mm), while TE Connectivity 5745435-8 specifies 0.454" (11.53mm). Differences within this range require PCB layout verification to ensure proper component clearance and solder joint accessibility. Other substitutes maintain the 0.409" specification.

Q: Are there temperature rating differences I should consider?

A: The primary part and Amphenol Delta D series (D15P13A4GL00LF, D15P13A4GV00LF, D15P13A4GX00LF) operate across -55°C to 125°C. TE Connectivity parts (1-338169-2 and 5745435-8) have a maximum operating temperature of 105°C. Applications requiring operation above 105°C must use Amphenol substitutes or the primary HARTING part.

Q: What is the difference between flange configurations?

A: The primary part features a mating side female screwlock (4-40). Substitutes vary: TE Connectivity 1-338169-2 uses housing/shell (4-40), TE Connectivity 5745435-8 uses mating side standard screws, and Amphenol D15P13A4GL00LF uses housing/shell (M3). Flange configuration affects mechanical mounting and mating interface compatibility. Verify that the substitute's flange design matches the application's connector receptacle.

Q: Does contact material affect electrical performance?

A: The primary part uses copper alloy contacts, while substitutes use phosphor bronze or brass with gold plating. All materials are suitable for signal transmission in D-Sub applications. Contact material and finish differences do not prevent functional substitution when electrical current and voltage requirements are met.

Q: What packaging options are available?

A: The primary part is supplied in bulk packaging. All listed substitutes are supplied in tray packaging. Tray packaging provides organized component presentation and may facilitate automated assembly processes. Bulk versus tray packaging does not affect connector functionality.

Q: Are there REACH compliance considerations?

A: The primary part and most substitutes have REACH unaffected status. TE Connectivity 5745435-8 has vendor-undefined REACH status, and Amphenol D15P13A4GX00LF has REACH affected status. Applications subject to REACH regulations should prioritize parts with confirmed REACH unaffected or compliant status.

Q: Can I substitute based on inventory availability?

A: Inventory levels vary significantly among substitutes. Amphenol D15P13A4GV00LF has the highest inventory at 3244 units, while TE Connectivity 1-338169-2 has 1780 units. Inventory availability should be considered only after confirming that the substitute meets all electrical, mechanical, and compliance requirements for the application.