HARTING 09652616713 D-Sub Plug 15 Position Vertical Solder Connector

Part Overview

The HARTING 09652616713 is a 15-position D-Sub plug connector with male pins, designed for through-hole mounting and solder termination. This connector features a 2-row configuration (Shell Size 2, DA/A layout) with board lock and grounding indents. The part is currently active in production with 996 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain constraints occur, or when design flexibility allows for alternative manufacturers while maintaining electrical and mechanical compatibility within the specified parameter ranges.

Key Parameters

Parameter	Value
Connector Type	D-Sub Plug, Male Pins
Number of Positions	15
Number of Rows	2
Shell Size / Layout	2 (DA, A)
Mounting Type	Through Hole
Termination	Solder
Contact Type	Signal
Flange Feature	Mating Side, Female Screwlock (4-40)
Shell Material	Steel
Dielectric Material	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
Operating Temperature Range	-55°C to 125°C
Current Rating	6.5A
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09652616713 is determined by strict equivalence in the following critical parameters:

Connector type: D-Sub plug with male pins
Position count: 15 positions
Row configuration: 2 rows
Shell size and layout: Size 2 (DA, A)
Mounting method: Through hole
Termination method: Solder
Contact type: Signal
Operating temperature range: -55°C to 125°C minimum
Flammability rating: UL94 V-0 minimum
Moisture sensitivity: MSL 1 (Unlimited)

The four qualified substitute parts meet these core requirements. Variations in secondary parameters such as shell finish, contact material, contact finish, current rating, and voltage rating are permitted within the scope of D-Sub connector standardization, provided the primary electrical and mechanical interfaces remain compatible.

Parameter Comparison

Parameter	HARTING 09652616713	Amphenol ICC D15P24A4GV00LF	Amphenol ICC L717DA15PV	Amphenol ICC L717TSAH15POL2	TE Connectivity M24308/24-2F
Connector Type	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins
Number of Positions	15	15	15	15	15
Number of Rows	2	2	2	2	2
Shell Size / Layout	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder
Operating Temperature Range	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	Not specified
Current Rating	6.5A	5A per Contact	7.5A	3A	5A
Voltage Rating	Not specified	300V	300V	600V	Not specified
Shell Material Finish	Steel	Steel, Tin-Nickel Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Cadmium Plated
Contact Material	Copper Alloy	Phosphor Bronze	Brass	Copper Alloy	Brass
Contact Finish	Not specified	Gold	Gold	Gold	Gold
RoHS Status	RoHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS non-compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	Not Applicable
Product Status	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All four substitute parts maintain active production status and meet the core mechanical and electrical interface requirements of the HARTING 09652616713.

For applications requiring RoHS compliance, the Amphenol ICC parts (D15P24A4GV00LF, L717DA15PV, L717TSAH15POL2) are suitable alternatives. The TE Connectivity M24308/24-2F is RoHS non-compliant and is designated for military and aerospace applications under MIL-DTL-24308 specification.

Current rating considerations: The HARTING part is rated at 6.5A. The Amphenol ICC L717DA15PV (7.5A) and D15P24A4GV00LF (5A per contact) provide comparable or higher current capacity. The L717TSAH15POL2 is rated at 3A and is suitable for lower-current signal applications. The TE Connectivity M24308/24-2F is rated at 5A.

Voltage rating considerations: The HARTING part does not specify a voltage rating. Amphenol ICC parts specify 300V (D15P24A4GV00LF, L717DA15PV) or 600V (L717TSAH15POL2). The TE Connectivity part does not specify voltage rating.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC D15P24A4GV00LF directly replace the HARTING 09652616713?

A: Yes. Both connectors share identical mechanical interfaces (15-position, 2-row, Size 2 DA/A layout), through-hole mounting, and solder termination. The D15P24A4GV00LF features tin-nickel plated steel shell and gold-plated phosphor bronze contacts, which are compatible with the HARTING connector's electrical and mechanical requirements.

Q: What is the difference between the Amphenol ICC L717DA15PV and L717TSAH15POL2?

A: Both are 15-position D-Sub plugs with identical mechanical interfaces. The L717DA15PV is rated for 7.5A and 300V, with machined brass contacts and gold finish. The L717TSAH15POL2 is rated for 3A and 600V, with stamped copper alloy contacts and gold finish. Selection depends on current and voltage requirements of the application.

Q: Is the TE Connectivity M24308/24-2F suitable for commercial applications?

A: The M24308/24-2F is designated for military, aerospace, and defense applications under MIL-DTL-24308 specification. It is RoHS non-compliant and carries REACH-affected status. For commercial applications requiring RoHS compliance, the Amphenol ICC alternatives are recommended.

Q: Are all substitute parts available in the same packaging as the HARTING 09652616713?

A: The HARTING 09652616713 is packaged in trays. The Amphenol ICC parts (D15P24A4GV00LF, L717DA15PV, L717TSAH15POL2) are also packaged in trays. The TE Connectivity M24308/24-2F is packaged in bulk. Packaging differences do not affect connector compatibility but may impact procurement and handling procedures.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by: 15-position count, 2-row configuration, Size 2 (DA, A) shell layout, through-hole mounting, solder termination, D-Sub plug connector type with male pins, operating temperature range of -55°C to 125°C, and UL94 V-0 flammability rating. Secondary parameters such as shell finish, contact material, and contact finish may vary within D-Sub connector standardization.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message