HARTING 09651696713 D-Sub 9-Position Plug Connector - Equivalent & Substitute Parts

Part Overview

The HARTING 09651696713 is a 9-position D-Sub plug connector with male pins, designed for through-hole solder termination. This connector features a vertical mounting orientation, mating-side female screwlock (4-40), and board lock functionality. The part is currently active in production with 953 units in stock.

Substitute parts are necessary when the original HARTING component becomes unavailable, when alternative sourcing reduces lead times, or when design flexibility permits selection from qualified alternatives that meet identical electrical and mechanical specifications.

Key Parameters

Parameter	Value
Connector Type	D-Sub Plug, Male Pins
Number of Positions	9
Number of Rows	2
Shell Size / Layout	1 (DE, E)
Mounting Type	Through Hole
Termination Method	Solder
Flange Feature	Mating Side, Female Screwlock (4-40)
Current Rating	6.5A
Operating Temperature Range	-55°C to 125°C
Material Flammability Rating	UL94 V-0
Contact Finish	Gold
Shell Material	Steel
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following critical parameters:

Connector Type & Position Count: Must be D-Sub plug with 9 positions, 2 rows, shell size 1 (DE, E)
Mounting & Termination: Must support through-hole solder termination
Flange Configuration: Must feature mating-side female screwlock (4-40) with board lock capability
Electrical Performance: Current rating must meet or exceed 6.5A; operating temperature range must encompass -55°C to 125°C
Compliance: Must maintain UL94 V-0 flammability rating and ROHS3 compliance

Substitute parts are grouped into two categories:

Category A - Full Electrical & Mechanical Equivalents: Parts meeting all critical parameters including current rating (6.5A or higher), full temperature range (-55°C to 125°C), and identical flange configuration.

Category B - Functional Alternatives with Parameter Variance: Parts meeting core connector geometry and mounting requirements but with reduced current rating (5A-6A), narrower temperature range (-50°C to 100°C or -55°C to 105°C), or alternative flange configurations. These parts are suitable only when application requirements permit the specified parameter reductions.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Connector Type	Positions	Mounting	Flange Feature	Current Rating (A)	Temp Range (°C)	Contact Finish	Shell Material	RoHS Status	Product Status
09651696713	HARTING	D-Sub Plug, Male	9 (2R)	Through Hole	Mating Side, Female Screwlock (4-40)	6.5	-55 to 125	Gold	Steel	ROHS3	Active
1-747871-6	TE Connectivity AMP	D-Sub Plug, Male	9 (2R)	Through Hole	Mating Side, Female Screwlock (4-40)	6.0	-55 to 105	Gold	Steel, Tin Plated	ROHS3	Active
172-009-112R001	NorComp Inc.	D-Sub Plug, Male	9 (2R)	Panel Mount, Through Hole	Housing/Shell (Unthreaded)	5.0	-50 to 100	Gold	Steel, Tin Plated	ROHS3	Obsolete
172-E09-113R001	NorComp Inc.	D-Sub Plug, Male	9 (2R)	Panel Mount, Through Hole	Housing/Shell (Unthreaded)	5.0	-50 to 100	Gold	Steel, Nickel Plated	ROHS3	Active
172-E09-113R011	NorComp Inc.	D-Sub Plug, Male	9 (2R)	Panel Mount, Through Hole	Board Side (4-40)	5.0	-50 to 100	Gold	Steel, Nickel Plated	ROHS3	Active
172-E09-113R031	NorComp Inc.	D-Sub Plug, Male	9 (2R)	Panel Mount, Through Hole	Mating Side (4-40)	5.0	-50 to 100	Gold	Steel, Nickel Plated	ROHS3	Active
172-E09-113R911	NorComp Inc.	D-Sub Plug, Male	9 (2R)	Panel Mount, Through Hole	Board Side (4-40), Mating Side, Female Screwlock (4-40)	5.0	-50 to 100	Gold	Steel, Nickel Plated	ROHS3	Active
208006-1	TE Connectivity AMP	D-Sub Plug, Male	9 (2R)	Through Hole	Housing/Shell (Unthreaded)	6.0	-55 to 105	Gold	Not Specified	RoHS non-compliant	Active
5-338309-2	TE Connectivity AMP	D-Sub Plug, Male	9 (2R)	Through Hole	Housing/Shell (Unthreaded)	6.0	-55 to 105	Gold	Steel, Tin Plated	RoHS Compliant	Obsolete
5208006-1	TE Connectivity AMP	D-Sub Plug, Male	9 (2R)	Through Hole	Housing/Shell (Unthreaded)	6.0	-55 to 105	Gold	Not Specified	RoHS Compliant	Active
5208006-2	TE Connectivity AMP	D-Sub Plug, Male	9 (2R)	Through Hole	Housing/Shell (Unthreaded)	6.0	-55 to 105	Gold	Not Specified	RoHS Compliant	Active

Engineering Selection Recommendations

Primary Substitute (Highest Compatibility): TE Connectivity 1-747871-6

This part maintains active product status, ROHS3 compliance, and through-hole vertical mounting identical to the HARTING 09651696713. The mating-side female screwlock (4-40) configuration matches the original specification. Current rating of 6.0A and operating temperature range of -55°C to 105°C satisfy the majority of applications within the original part's -55°C to 125°C envelope. The 20°C reduction in maximum temperature must be evaluated against specific application requirements.

Secondary Substitutes (Functional Alternatives): TE Connectivity 5208006-1 and 5208006-2

Both parts are active, ROHS3 compliant, and support through-hole solder termination with 6.0A current rating and -55°C to 105°C operating range. However, the housing/shell (unthreaded) flange configuration differs from the original mating-side female screwlock design. These parts are suitable only when the application does not require the screwlock mounting interface.

Not Recommended for Direct Substitution: NorComp 172-series parts (172-009-112R001, 172-E09-113R001, 172-E09-113R011, 172-E09-113R031, 172-E09-113R911)

These parts feature panel mount configurations and reduced current ratings (5.0A) with narrower operating temperature ranges (-50°C to 100°C). The 172-009-112R001 is obsolete. While the 172-E09-113R911 includes both board-side and mating-side female screwlock features, the reduced electrical specifications and panel mount design create incompatibility with through-hole vertical mounting applications.

Not Recommended: TE Connectivity 208006-1 and 5-338309-2

The 208006-1 is RoHS non-compliant. The 5-338309-2 is obsolete. Both lack the mating-side female screwlock configuration and feature unthreaded housing/shell flanges.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1-747871-6 be used as a direct replacement for the HARTING 09651696713?

A: The 1-747871-6 is mechanically and electrically compatible for applications where the operating temperature does not exceed 105°C. Both parts feature 9-position D-Sub plug configuration, through-hole solder termination, mating-side female screwlock (4-40), and gold-plated contacts. The primary difference is the maximum operating temperature: the original part supports -55°C to 125°C, while the substitute supports -55°C to 105°C. Verify application temperature requirements before substitution.

Q: Why are the NorComp 172-series parts not suitable substitutes?

A: The NorComp 172-series parts are designed for panel mount applications, whereas the HARTING 09651696713 is specified for through-hole vertical mounting. Additionally, the 172-series parts have a reduced current rating of 5.0A compared to the original 6.5A specification, and a narrower operating temperature range of -50°C to 100°C. The flange configurations also differ: most 172-series variants feature unthreaded housing/shell flanges rather than the mating-side female screwlock (4-40) of the original part.

Q: What is the significance of the "Board Lock" feature on the HARTING 09651696713?

A: The board lock feature, combined with the mating-side female screwlock (4-40), provides mechanical retention and alignment during mating and unmating cycles. This feature is present on the HARTING original and the TE Connectivity 1-747871-6. The TE Connectivity 5208006-1 and 5208006-2 lack this feature due to their unthreaded housing/shell design, making them unsuitable for applications requiring positive mechanical locking.

Q: Are the TE Connectivity 5208006-1 and 5208006-2 interchangeable?

A: Both parts are electrically and mechanically identical, with the same current rating (6.0A), operating temperature range (-55°C to 105°C), and housing configuration. The primary difference is packaging: 5208006-1 is supplied in standard tube packaging, while 5208006-2 is supplied in bulk quantities. For connector functionality, they are interchangeable. However, neither part includes the mating-side female screwlock (4-40) or board lock features of the original HARTING part.

Q: What compliance certifications should I verify when selecting a substitute?

A: All recommended substitute parts maintain ROHS3 compliance and UL94 V-0 flammability rating, matching the original HARTING 09651696713. Verify that the selected substitute meets your specific regulatory requirements for your application region and industry. The TE Connectivity 208006-1 is RoHS non-compliant and should not be used in applications requiring RoHS compliance.

Q: Can I use a substitute part with a lower current rating (5.0A vs. 6.5A)?

A: Substitution with lower current ratings is permissible only if your application current requirements do not exceed the substitute part's rating. The NorComp 172-series parts are rated for 5.0A maximum. If your circuit draws more than 5.0A, these parts are not suitable. Verify actual circuit current draw before selecting a lower-rated substitute.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message