HARTING 09651236802 D-Sub Connector: Equivalent & Substitute Parts

Part Overview

The HARTING 09651236802 is a 9-position D-Sub plug connector with right-angle solder termination, designed for through-hole mounting applications. This connector features male pins, a DE/E shell size, and is rated for 6.5A continuous current operation across an extended temperature range of -55°C to 125°C. The part is currently active in production with 957 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, design revisions, or supply chain continuity when the primary part becomes unavailable or when alternative specifications better suit specific application requirements.

Substiute Parts

09651236802

HARTINGIn Stock: 104409651236802 Datasheet

Current PartRFQ

1218440-1

TE Connectivity Aerospace, Defense and MarineIn Stock: 7261218440-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HARTING 09651236802 is determined by strict equivalence across the following critical parameters:

• Connector Style & Type: D-Sub plug with male pins
• Position Count & Row Configuration: 9 positions in 2-row layout
• Shell Size: DE/E (Size 1)
• Mounting & Termination: Through-hole, right-angle solder connection
• Electrical Performance: Current rating and operating temperature compatibility
• Contact Configuration: Signal contact type

The substitute part TE Connectivity 1218440-1 maintains functional equivalence across these core parameters. Variations in secondary specifications such as shell material finish, contact finish, backset spacing, and compliance certifications do not preclude substitution when the primary electrical and mechanical requirements are satisfied.

Parameter Comparison

Engineering Selection Recommendations

Primary Part (HARTING 09651236802): Select this part for new designs requiring RoHS3 compliance and maximum current capacity of 6.5A. The part is actively manufactured and maintains full compliance with REACH regulations.

Substitute Part (TE Connectivity 1218440-1): This part is suitable for applications where RoHS compliance is not a design requirement and where the 5A current rating is sufficient for the application. The part qualifies under military specification MIL-DTL-24308 and the AMPLIMITE 109 series, making it appropriate for aerospace, defense, and marine applications. The cadmium-plated steel shell and gold-plated contacts provide enhanced corrosion resistance in harsh environments. Note that this part is RoHS non-compliant and REACH-affected, requiring compliance verification against project specifications.

Both parts share identical mechanical form factors, pin configurations, and operating temperature ranges, ensuring physical and functional interchangeability within the specified electrical parameters.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity 1218440-1 be used as a direct replacement for HARTING 09651236802?

A: Yes, within electrical and mechanical constraints. Both connectors share identical 9-position DE/E shell configurations, right-angle through-hole solder termination, and -55°C to 125°C operating temperature ranges. The TE Connectivity part is rated for 5A versus the HARTING part's 6.5A rating. Substitution is valid when circuit current requirements do not exceed 5A. Compliance requirements must be evaluated independently.

Q: What are the key differences between these two parts?

A: The primary differences are current rating (6.5A vs. 5A), shell finish (unfinished steel vs. cadmium-plated steel), contact material (copper alloy vs. brass), contact finish (unspecified vs. gold-plated), and compliance status (RoHS3-compliant vs. RoHS non-compliant). Mechanically and functionally, both parts are equivalent for 9-position D-Sub plug applications.

Q: Which part should be selected for military or aerospace applications?

A: The TE Connectivity 1218440-1 is qualified to MIL-DTL-24308 and carries the AMPLIMITE 109 military series designation, making it the appropriate choice for aerospace, defense, and marine applications where military specifications are required.

Q: Are there any packaging or inventory considerations?

A: Both parts are supplied in bulk packaging. HARTING 09651236802 has 957 units in stock, while TE Connectivity 1218440-1 has 704 units in stock. Procurement lead times and availability should be confirmed with suppliers for production quantities.

Q: What compliance certifications apply to each part?

A: HARTING 09651236802 is RoHS3-compliant, REACH-unaffected, and carries UL94 V-0 material flammability rating. TE Connectivity 1218440-1 is RoHS non-compliant and REACH-affected. Project compliance requirements must determine which part is acceptable.