HARTING 09643247222 D-Sub Plug 25 Position Right Angle Solder Connector

Part Overview

The HARTING 09643247222 is a 25 position D-Sub plug connector with right angle through-hole solder termination. This connector features a DB/B shell size (3) with male pins, designed for signal applications in industrial and electronic equipment. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing system maintenance and new design implementations. Substitute connectors must maintain compatibility across key electrical and mechanical parameters including shell size, pin count, mounting orientation, and termination method.

Substiute Parts

09643247222

HARTINGIn Stock: 77209643247222 Datasheet

Current PartRFQ

1-338170-2

TE Connectivity AMP ConnectorsIn Stock: 22971-338170-2 Datasheet

MFR RecommendedRFQ

5745436-3

TE Connectivity AMP ConnectorsIn Stock: 9575745436-3 Datasheet

MFR RecommendedRFQ

DBM25P500

Amphenol ICC (FCI)In Stock: 885DBM25P500 Datasheet

MFR RecommendedRFQ

DBM25S300

Amphenol ICC (FCI)In Stock: 1095DBM25S300 Datasheet

MFR RecommendedRFQ

DBML25P500

Amphenol ICC (FCI)In Stock: 962DBML25P500 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09643247222 are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Core Compatibility Parameters:

• Connector Type: Plug with Male Pins (25 position)
• Shell Size: 3 (DB, B) configuration
• Mounting: Through Hole, Right Angle orientation
• Termination: Solder connection method
• Number of Rows: 2 rows
• Backset Spacing: 0.406" (10.30mm)

Electrical Compatibility Parameters:

• Current Rating: Minimum 6A (original part rated 7.5A)
• Voltage Rating: Minimum 100V (original part rated 100V)
• Operating Temperature Range: Must encompass -55°C to 125°C

Regulatory Compliance:

• RoHS3 Compliance required for active substitutes
• Material Flammability: UL94 V-0 rating

Substitute parts are grouped into two categories: direct functional equivalents (TE Connectivity AMPLIMITE series and Amphenol ICC DM HE501 series plugs) and related connector types (Amphenol ICC receptacle). The receptacle variant (DBM25S300) is included for reference but represents a different connector gender and is not a direct plug substitute.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active, RoHS3 Compliant):

TE Connectivity 1-338170-2 (AMPLIMITE HD-20 series) and TE Connectivity 5745436-3 (AMPLIMITE HDP-20 series) are the preferred substitutes for new designs and maintenance applications requiring RoHS3 compliance. Both parts maintain the 25 position, DB/B shell size, right angle through-hole solder configuration. The TE 1-338170-2 provides identical backset spacing (0.406") and matches the original part's mechanical footprint. The TE 5745436-3 features a different backset spacing (0.454") and mating side flange configuration, requiring PCB layout verification before implementation.

Both TE substitutes operate within -55°C to 105°C, which is narrower than the original part's -55°C to 125°C range. Applications requiring operation above 105°C must use alternative substitutes.

Secondary Substitutes (Active, RoHS Non-Compliant):

Amphenol ICC DBM25P500 and DBML25P500 (DM HE501 series) are active alternatives for applications where RoHS compliance is not mandated. Both maintain full electrical compatibility with 7.5A current rating and 300V voltage rating, exceeding the original part's specifications. The DBM25P500 and DBML25P500 support the full -55°C to 125°C operating temperature range matching the original part. The DBML25P500 includes M3 housing/shell mounting features, while DBM25P500 uses unthreaded housing/shell configuration. Both require verification of flange mounting compatibility with existing PCB designs.

Not Recommended as Direct Substitute:

Amphenol ICC DBM25S300 is a receptacle (female sockets) connector and is not a direct substitute for the plug (male pins) configuration. This part is included in the reference documentation but serves a different functional role in connector pairs.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity 1-338170-2 be used as a direct replacement for HARTING 09643247222?

A: Yes, the TE 1-338170-2 is a direct mechanical and electrical substitute. Both connectors share identical shell size (DB/B, 25 position), mounting type (through hole, right angle), termination method (solder), and backset spacing (0.406"). The TE part is RoHS3 compliant and currently in active production. Verify that the operating temperature range of -55°C to 105°C meets application requirements, as the original HARTING part supports -55°C to 125°C.

Q: What is the difference between TE 1-338170-2 and TE 5745436-3?

A: Both are 25 position D-Sub plugs with right angle solder termination from TE Connectivity. The primary differences are backset spacing (1-338170-2 uses 0.406", 5745436-3 uses 0.454") and flange configuration (1-338170-2 has board side flange with 4-40 mounting, 5745436-3 has mating side flange with standard screws). The 5745436-3 requires PCB layout verification due to different backset spacing. Both operate within -55°C to 105°C.

Q: Why are Amphenol DBM25P500 and DBML25P500 marked as RoHS non-compliant?

A: These Amphenol ICC parts use yellow cadmium plating on the steel shell, which contains cadmium restricted under RoHS regulations. They remain available for applications where RoHS compliance is not required. Both parts exceed the electrical specifications of the original HARTING connector with 7.5A current rating and 300V voltage rating, and support the full -55°C to 125°C operating temperature range.

Q: What is the difference between DBM25P500 and DBML25P500?

A: Both are 25 position D-Sub plugs from Amphenol ICC DM HE501 series with identical electrical ratings and operating temperature range. The primary difference is the flange mounting configuration: DBM25P500 uses unthreaded housing/shell mounting, while DBML25P500 uses M3 threaded housing/shell mounting. Select based on PCB mounting hole specifications.

Q: Can I use DBM25S300 as a substitute?

A: No. DBM25S300 is a receptacle connector with female sockets, while the HARTING 09643247222 is a plug connector with male pins. These are complementary connector types designed to mate with each other, not to substitute for one another. DBM25S300 is included in the reference documentation for connector pair identification only.

Q: What are the key parameters I must verify before selecting a substitute?

A: Verify the following parameters match your application requirements: (1) Connector gender (plug vs. receptacle), (2) Number of positions and shell size (25 position, DB/B size), (3) Mounting orientation (right angle through-hole), (4) Termination method (solder), (5) Current and voltage ratings, (6) Operating temperature range, (7) RoHS compliance requirements, and (8) PCB mounting hole spacing and flange configuration compatibility.

Q: Are there inventory considerations when selecting a substitute?

A: Yes. Current inventory levels vary: TE 1-338170-2 has 2254 units in stock, TE 5745436-3 has 877 units, Amphenol DBM25P500 has 797 units, and Amphenol DBML25P500 has 934 units. Verify availability with your supplier for production timelines and lead time requirements.