HARTING 09642247242 D-Sub Plug 15-Position Right Angle Solder Connector

Part Overview

The HARTING 09642247242 is a 15-position D-Sub plug connector with right-angle through-hole solder termination. This connector is designed for signal applications requiring robust mechanical and electrical performance in industrial and commercial equipment. The part is currently active in production with 1109 units in stock.

Equivalent and substitute parts are necessary when the original manufacturer part becomes unavailable, when alternative sourcing reduces lead times or cost, or when design requirements allow for compatible alternatives that meet the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Connector Type	D-Sub Plug, Male Pins
Number of Positions	15
Number of Rows	2
Shell Size / Layout	2 (DA, A)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	7.5A
Voltage Rating	100V
Operating Temperature	-20°C to 125°C
Material Flammability	UL94 V-0
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09642247242 is determined by the following critical parameters:

Connector Type: Must be D-Sub Plug with Male Pins
Position Count: Must be 15 positions in 2-row configuration
Shell Size: Must be Size 2 (DA, A)
Mounting: Must be Through Hole, Right Angle
Termination: Must be Solder
Flammability Rating: Must meet UL94 V-0

Substitute parts are grouped into two categories:

Category A - Direct Mechanical Equivalents: Parts meeting all critical parameters with compatible electrical ratings (current and voltage). These include TE Connectivity AMPLIMITE HD-20 series (1-338169-2, 3-338169-2) and Amphenol ICC Delta D series (D15P13A4GV00LF, D15P13A4GL00LF, D15P13A4GX00LF).

Category B - Extended Compatibility: Parts with the same core mechanical configuration but different flange features or higher current ratings. These include TE Connectivity AMPLIMITE HDP-20 (5745435-8) and Amphenol ICC DM HE501 series (DAM15P500, DAML15P500).

Note: DAM15S300 is a receptacle connector (female sockets) and is not a direct substitute for the plug configuration.

Parameter Comparison

Parameter	HARTING 09642247242	TE 1-338169-2	TE 3-338169-2	TE 5745435-8	Amphenol D15P13A4GV00LF	Amphenol D15P13A4GL00LF	Amphenol D15P13A4GX00LF	Amphenol DAM15P500	Amphenol DAML15P500
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Positions	15	15	15	15	15	15	15	15	15
Rows	2	2	2	2	2	2	2	2	2
Shell Size	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)	2 (DA, A)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating	7.5A	6A	6A	6A	5A per Contact	5A per Contact	5A per Contact	7.5A per Contact	7.5A per Contact
Voltage Rating	100V	125V	125V	125V	300V	300V	300V	300V	300V
Operating Temperature	-20°C to 125°C	-55°C to 105°C	-55°C to 105°C	-55°C to 105°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C
Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	REACH Affected	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	RoHS non-compliant	RoHS non-compliant
Shell Material Finish	Steel	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin-Nickel Plated	Steel, Tin-Nickel Plated	Steel, Tin-Nickel Plated	Steel, Yellow Cadmium Plated	Steel, Yellow Cadmium Plated
Contact Material	Copper Alloy	Phosphor Bronze	Phosphor Bronze	Brass	Brass	Brass	Brass	Brass	Brass
Backset Spacing	—	0.406" (10.30mm)	0.406" (10.30mm)	0.454" (11.53mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.406" (10.30mm)	0.406" (10.30mm)
Flange Feature	Housing/Shell (4-40)	Housing/Shell (4-40)	Mating Side, Female Screwlock (4-40)	Mating Side, Standard Screws	Mating Side, Female Screwlock (4-40)	Housing/Shell (M3)	Housing/Shell (4-40)	Housing/Shell (Unthreaded)	Housing/Shell (M3)

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility)

TE Connectivity 1-338169-2 and Amphenol ICC D15P13A4GX00LF are the preferred substitutes. Both maintain ROHS3 compliance, meet UL94 V-0 flammability requirements, and provide equivalent mechanical fit and electrical performance within acceptable parameter ranges. The TE 1-338169-2 offers the closest current rating match at 6A and is available in higher inventory (1780 units).

Secondary Substitutes (Extended Operating Range)

Amphenol ICC D15P13A4GV00LF and D15P13A4GL00LF provide higher voltage ratings (300V) and extended temperature range (-55°C to 125°C), making them suitable for applications requiring enhanced environmental performance. Both maintain ROHS3 compliance and RoHS compliance status. Current rating is reduced to 5A per contact.

Alternative Substitutes (Conditional Use)

TE Connectivity 5745435-8 (AMPLIMITE HDP-20 series) and Amphenol ICC DAM15P500 and DAML15P500 are compatible mechanically but present compliance considerations. The TE 5745435-8 has RoHS compliance status (not ROHS3). The Amphenol DM HE501 series parts (DAM15P500, DAML15P500) are RoHS non-compliant and should be used only in applications where RoHS compliance is not required.

Not Recommended

Amphenol ICC DAM15S300 is a receptacle connector (female sockets) and is not suitable as a substitute for the plug configuration.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a lower current rating?

A: Substitutes with lower current ratings (5A or 6A versus the original 7.5A) are mechanically compatible but must be evaluated against your circuit requirements. If your application draws current below the substitute's rating, the part is acceptable. If your application requires the full 7.5A rating, use only substitutes rated for 7.5A (DAM15P500 or DAML15P500).

Q: What is the difference between the TE 1-338169-2 and 3-338169-2?

A: Both are 15-position D-Sub plugs from the AMPLIMITE HD-20 series with identical electrical and mechanical specifications. The primary difference is the flange feature: 1-338169-2 has a housing/shell 4-40 flange, while 3-338169-2 has a mating side female screwlock 4-40 flange. Additionally, 3-338169-2 has REACH Affected status while 1-338169-2 is REACH Unaffected.

Q: Are the Amphenol Delta D series parts (D15P13A4GV00LF, D15P13A4GL00LF, D15P13A4GX00LF) interchangeable?

A: All three Delta D parts are mechanically and electrically equivalent with identical current (5A per contact), voltage (300V), and temperature ratings (-55°C to 125°C). The differences are in flange features: D15P13A4GV00LF has mating side female screwlock, D15P13A4GL00LF has housing/shell M3, and D15P13A4GX00LF has housing/shell 4-40. Select based on your mounting requirements.

Q: What does RoHS non-compliant mean for the DAM15P500 and DAML15P500?

A: These parts do not meet RoHS (Restriction of Hazardous Substances) requirements and may contain restricted materials such as lead or cadmium. They are suitable only for applications and markets where RoHS compliance is not mandated. For new designs or regulated applications, use ROHS3 or RoHS compliant alternatives.

Q: Can I use the Amphenol DM HE501 series (DAM15P500, DAML15P500) as direct replacements?

A: These parts are mechanically compatible and offer higher current ratings (7.5A per contact) matching the original HARTING part. However, they are RoHS non-compliant. Use them only if your application does not require RoHS compliance and if the yellow cadmium plating is acceptable for your environmental conditions.

Q: What is the significance of backset spacing differences?

A: Backset spacing (0.406" to 0.454") affects the distance from the connector mounting surface to the contact plane. Minor variations (0.406" to 0.409") are typically accommodated by standard PCB layouts. The larger 0.454" spacing in the TE 5745435-8 may require PCB design verification to ensure proper mating alignment.

Q: Which substitute offers the best long-term availability?

A: Amphenol ICC D15P13A4GX00LF has the highest inventory (3244 units) among substitutes, followed by TE Connectivity 3-338169-2 (2662 units). Both are active products with established supply chains.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message