HARTING 09641127216 D-Sub Receptacle Connector - Equivalent & Substitute Parts

Part Overview

The HARTING 09641127216 is a 9-position D-Sub receptacle connector with female sockets, designed for through-hole mounting on printed circuit boards. This connector features a board-side M3 flange, solder termination, and is rated for 7.5A at 100V. The part is classified as obsolete, making identification of active equivalent models necessary for ongoing procurement and system maintenance.

Substiute Parts

09641127216

HARTINGIn Stock: 77909641127216 Datasheet

Current PartRFQ

09641127215

HARTINGIn Stock: 121009641127215 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HARTING 09641127216 is determined by strict equivalence across the following critical parameters:

• Connector style (D-Sub) and type (Receptacle, Female Sockets)
• Position count (9) and row configuration (2)
• Shell size and layout (1 / DE, E)
• Mounting method (Through Hole) and termination (Solder)
• Electrical ratings (7.5A, 100V)
• Operating temperature range (-20°C to 125°C)
• Material specifications (Steel shell, Tin plated; Copper Alloy contacts; PCT dielectric)
• Compliance certifications (UL94 V-0, ROHS3, REACH Unaffected)

The primary substitute identified is HARTING 09641127215, which maintains all critical electrical, mechanical, and material specifications while differing only in flange feature design (4-40 vs. M3) and product status (Active vs. Obsolete).

Parameter Comparison

Engineering Selection Recommendations

The HARTING 09641127215 is the direct active equivalent for the obsolete 09641127216. Both parts maintain identical electrical performance (7.5A, 100V), mechanical compatibility (9-position, 2-row D-Sub layout), and regulatory compliance (UL94 V-0, ROHS3, REACH Unaffected).

The primary design difference is the flange fastening mechanism: the 09641127216 uses M3 metric fasteners, while the 09641127215 uses 4-40 UNC fasteners. This distinction affects only the board-mounting hardware and does not impact connector function, signal integrity, or electrical ratings.

Selection of the 09641127215 is appropriate for new designs and replacement applications where the 09641127216 is no longer available. Existing designs using the M3 flange variant may require mechanical redesign of the mounting interface to accommodate the 4-40 fastener pattern.

Frequently Asked Questions (FAQ)

Q: Can the 09641127215 be used as a direct replacement for the 09641127216 in existing assemblies?

A: Electrical and signal compatibility is complete. Mechanical compatibility depends on the existing board mounting design. If the PCB is drilled for M3 fasteners, the mounting holes must be re-drilled or adapted for 4-40 UNC fasteners. The connector footprint and solder pad layout remain identical.

Q: What is the significance of the flange feature difference (M3 vs. 4-40)?

A: The flange feature specifies the fastening standard for securing the connector to the PCB. M3 uses metric threads; 4-40 uses imperial UNC threads. The choice affects only the mounting hardware and does not alter electrical performance, pin configuration, or signal characteristics.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical certifications: UL94 V-0 flammability rating, ROHS3 compliance, and REACH Unaffected status. Moisture sensitivity level is 1 (Unlimited) for both.

Q: What is the current availability status of each part?

A: The 09641127216 is classified as obsolete with 694 units in stock. The 09641127215 is active with 1136 units in stock, making it the recommended choice for ongoing procurement.

Q: Do the electrical ratings differ between these connectors?

A: No. Both parts are rated for 7.5A continuous current at 100V maximum voltage, with an operating temperature range of -20°C to 125°C.