HARTING 09628100422 Heavy Duty Connector Hood - Equivalent & Substitute Parts

Part Overview

The HARTING 09628100422 is a heavy duty connector hood designed for top entry applications in the Han® EMC series. This component features a Size 10B configuration with PG21 thread entry, IP65 ingress protection rating, and operates across -40°C to 125°C. The part is classified as obsolete, necessitating identification of active equivalent models to maintain system compatibility and ensure continued availability for new installations and field replacements.

Substiute Parts

09628100422

HARTINGIn Stock: 103709628100422 Datasheet

Current PartRFQ

19628100426

HARTINGIn Stock: 104119628100426 Datasheet

MFR RecommendedRFQ

19628100427

HARTINGIn Stock: 102419628100427 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HARTING 09628100422 is determined by maintaining equivalence across the following critical parameters: connector type (hood), style (top entry), size designation (10B), ingress protection rating (IP65), housing material (aluminum die cast), operating temperature range (-40°C to 125°C), and regulatory compliance (ROHS3). The substitute parts identified differ only in thread size specification, which represents a mechanical interface variation rather than a functional performance change. Thread size alternatives (M25 and M32) accommodate different panel mounting configurations while preserving all electrical and environmental protection characteristics of the original design.

Parameter Comparison

Engineering Selection Recommendations

The HARTING 09628100422 is obsolete; active equivalents are available as HARTING 19628100426 (M25 thread) and HARTING 19628100427 (M32 thread). Both substitute parts maintain identical electrical performance, environmental protection (IP65), thermal operating range, and regulatory compliance (ROHS3 Compliant, REACH Unaffected). Selection between substitutes depends solely on panel mounting thread requirements: M25 for applications requiring metric M25 entry, or M32 for applications requiring metric M32 entry. Both substitutes are currently in active production status with confirmed inventory availability.

Frequently Asked Questions (FAQ)

Q: Can HARTING 19628100426 or 19628100427 directly replace the obsolete 09628100422?

A: Yes, both parts are direct functional equivalents. The substitutes maintain identical Size 10B configuration, top entry style, IP65 protection, aluminum die cast housing, and -40°C to 125°C operating range. Selection is determined by panel mounting thread specification: M25 or M32.

Q: What is the difference between the three part numbers?

A: The primary difference is thread size. The 09628100422 uses PG21 thread entry, while 19628100426 uses M25 and 19628100427 uses M32. All other mechanical and electrical characteristics remain identical.

Q: Are the substitute parts ROHS3 compliant?

A: Yes, both HARTING 19628100426 and 19628100427 are ROHS3 Compliant and REACH Unaffected, matching the compliance status of the original part.

Q: Do the substitute parts have the same physical dimensions?

A: Yes, all three parts share identical dimensions: 72.60mm length x 43.00mm width x 72.00mm height.

Q: Which substitute should I select for a new design?

A: Select based on your panel mounting hole specification. If your application requires M25 thread entry, use 19628100426. If your application requires M32 thread entry, use 19628100427. Both are active production parts with current inventory availability.