HARTING 09564615713 D-Sub High Density 62-Position Plug Connector

Part Overview

The HARTING 09564615713 is a 62-position D-Sub high density plug connector with male pins, designed for through-hole solder termination. This connector features a vertical orientation with mating-side female screwlock and board lock functionality. The part is currently active in production with 722 units in stock.

Equivalent and substitute parts are necessary when addressing supply chain constraints, packaging format requirements, or specific mounting configuration needs while maintaining electrical and mechanical compatibility within the D-Sub high density connector category.

Substiute Parts

09564615713

HARTINGIn Stock: 75809564615713 Datasheet

Current PartRFQ

180-M62-113R011

NorComp Inc.In Stock: 928180-M62-113R011 Datasheet

MFR RecommendedRFQ

180-M62-113R911

NorComp Inc.In Stock: 852180-M62-113R911 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09564615713 is determined by the following critical parameters that must remain constant:

• Connector style: D-Sub, High Density
• Connector type: Plug, Male Pins
• Number of positions: 62
• Number of rows: 3
• Shell size and layout: 4 (DC, C) High Density
• Termination method: Solder
• Contact material: Copper Alloy
• Regulatory compliance: ROHS3 Compliant, UL94 V-0

The substitute parts listed below (NorComp Inc. 180-M62-113R011 and 180-M62-113R911) maintain these core electrical and mechanical parameters. Variations in mounting type (panel mount vs. vertical through-hole), flange features, contact finish thickness, and operating temperature range do not affect functional interchangeability within the D-Sub high density connector category when the above parameters are matched.

Parameter Comparison

Engineering Selection Recommendations

Both NorComp substitute parts maintain active product status and full ROHS3 compliance with UL94 V-0 flammability certification, matching the regulatory requirements of the HARTING 09564615713.

The NorComp 180-M62-113R011 provides panel mount capability with board-side flange features and grounding indents with shielding.

The NorComp 180-M62-113R911 extends functionality with both board-side and mating-side female screwlock flanges, board lock features, grounding indents, and shielding.

Both NorComp variants support higher current ratings (5A vs. 2A) and extended operating temperature ranges (-50°C ~ 125°C vs. -40°C ~ 85°C). Selection between these substitutes depends on specific mounting configuration and flange feature requirements for the application.

Frequently Asked Questions (FAQ)

Q: Can the NorComp 180-M62-113R011 or 180-M62-113R911 directly replace the HARTING 09564615713 in existing designs?

A: Both NorComp parts maintain the same 62-position D-Sub high density connector configuration, shell size, solder termination, and contact material specifications. Compatibility depends on the specific mounting configuration and flange feature requirements of the application. The panel mount capability of NorComp parts may require PCB layout modifications compared to the vertical through-hole orientation of the HARTING part.

Q: What is the difference between the two NorComp substitute parts?

A: The 180-M62-113R011 features board-side flange with grounding indents and shielding. The 180-M62-113R911 adds mating-side female screwlock and board lock functionality to the same base configuration. Selection depends on whether mating-side screwlock and board lock features are required for the application.

Q: Are there packaging format differences between the main part and substitutes?

A: The HARTING 09564615713 is supplied in bulk packaging, while both NorComp substitutes are supplied in tray packaging. This affects handling and storage procedures but does not impact electrical or mechanical performance.

Q: Do the differences in contact finish thickness affect substitutability?

A: The HARTING part specifies 30.0µin (0.76µm) contact finish thickness, while NorComp parts specify flash thickness. Both finishes provide adequate gold plating for signal integrity and corrosion resistance in D-Sub connector applications. The difference does not affect functional interchangeability.

Q: How do the dielectric material differences impact performance?

A: The HARTING part uses polybutylene terephthalate (PBT) with glass filler, while NorComp parts use polyamide (PA6T) nylon 6T. Both materials meet UL94 V-0 flammability requirements and provide adequate dielectric properties for D-Sub high density connectors. Material selection does not affect electrical compatibility.