HARTING 09563625813 D-Sub High Density Connector - Equivalent & Substitute Parts

Part Overview

The HARTING 09563625813 is a 44-position D-Sub high density plug connector with right-angle solder termination, designed for through-hole mounting applications. This connector features male pins, nickel-plated steel shell, and gold-plated contacts rated for 2A per contact at operating temperatures from -40°C to 85°C. The part is active in production status and RoHS3 compliant, making it suitable for industrial and commercial electronic assemblies requiring high-density signal connectivity. Equivalent substitute parts are identified to provide procurement flexibility, inventory alternatives, and sourcing options when the primary part is unavailable.

Substiute Parts

09563625813

HARTINGIn Stock: 115609563625813 Datasheet

Current PartRFQ

10090926-P444XLF

Amphenol ICC (FCI)In Stock: 195310090926-P444XLF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Amphenol ICC (FCI) part number 10090926-P444XLF qualifies as a direct substitute for the HARTING 09563625813 based on the following critical parameters:

Matching Parameters:

• 44-position D-Sub high density connector configuration
• Male pins, plug connector type
• 3-row layout with DB/B shell size (high density)
• Right-angle solder termination
• Through-hole mounting capability
• Nickel-plated steel shell
• Gold contact finish
• 0.350" (8.89mm) backset spacing
• Board lock and grounding indent features
• UL94 V-0 flammability rating
• RoHS compliance and REACH unaffected status
• MSL 1 (unlimited moisture sensitivity level)

Allowable Variations:

• Current rating: 2.5A per contact (higher than 2A requirement, acceptable for substitution)
• Operating temperature range: -55°C to 105°C (wider than -40°C to 85°C, acceptable for substitution)
• Contact finish thickness: Flash (versus 30.0µin specification, both meet gold plating requirements)
• Flange feature: Board side 4-40 (versus mating side female screwlock, both provide mechanical retention)
• Packaging: Tray (versus bulk, does not affect electrical or mechanical compatibility)

Parameter Comparison

Engineering Selection Recommendations

The Amphenol ICC (FCI) 10090926-P444XLF is an active production substitute for the HARTING 09563625813. Both parts maintain identical electrical and mechanical specifications for the core connector function: 44-position D-Sub high density, male pin plug configuration with solder termination and through-hole mounting.

The substitute part provides enhanced specifications in current rating (2.5A versus 2A) and operating temperature range (-55°C to 105°C versus -40°C to 85°C), making it suitable for applications requiring extended thermal or electrical performance margins. Both parts are RoHS compliant and REACH unaffected, meeting modern regulatory requirements.

The primary difference lies in flange mounting orientation: the HARTING part features mating-side female screwlock retention, while the Amphenol part provides board-side mounting with additional mounting brackets. This distinction requires PCB layout verification to ensure mechanical compatibility with the target application. Both parts maintain identical backset spacing (0.350") and contact pitch, ensuring electrical interchangeability at the mating interface.

Selection between these parts should be based on PCB mounting requirements and packaging availability rather than electrical performance, as both meet or exceed the specified electrical and thermal requirements.

Frequently Asked Questions (FAQ)

Q: Are these connectors electrically interchangeable? A: Yes. Both the HARTING 09563625813 and Amphenol ICC 10090926-P444XLF are 44-position D-Sub high density plugs with identical pin configurations, contact pitch (0.350"), and solder termination. They mate with the same receptacle connectors.

Q: What is the difference in current rating between these parts? A: The HARTING part is rated for 2A per contact, while the Amphenol substitute is rated for 2.5A per contact. The higher rating of the substitute part is compatible with applications designed for the original 2A specification.

Q: Can I use the Amphenol part in place of the HARTING part on my existing PCB? A: Mechanical compatibility depends on flange mounting orientation. The HARTING part uses mating-side female screwlock retention, while the Amphenol part uses board-side mounting with brackets. Verify your PCB layout accommodates the board-side flange configuration before substitution.

Q: What is the operating temperature difference? A: The HARTING part operates from -40°C to 85°C, while the Amphenol substitute operates from -55°C to 105°C. The wider temperature range of the substitute part is compatible with applications within the original temperature specification.

Q: Are both parts RoHS compliant? A: Yes. The HARTING part is RoHS3 compliant, and the Amphenol part is RoHS compliant. Both meet current regulatory requirements and are REACH unaffected.

Q: What is the difference in packaging? A: The HARTING part is supplied in bulk packaging, while the Amphenol substitute is supplied in tray packaging. This affects handling and storage but does not impact electrical or mechanical performance.

Q: Do both parts have the same contact finish? A: Both parts feature gold-plated contacts. The HARTING part specifies gold or gold-palladium with 30.0µin thickness, while the Amphenol part specifies gold with flash thickness. Both finishes meet gold plating requirements for signal contact applications.

Q: Can I mix these connectors in the same assembly? A: Yes, provided the PCB layout accommodates both flange mounting styles. Since both are 44-position D-Sub high density plugs with identical electrical specifications, they can be used in the same assembly if mechanical constraints are satisfied.