HARTING 09562625813 D-Sub High Density Connector 26 Position Equivalent & Substitute Parts

Part Overview

The HARTING 09562625813 is a 26 Position D-Sub High Density plug connector with right-angle solder termination, designed for through-hole mounting applications. This connector features male pins, nickel-plated steel shell, and gold or gold-palladium contact finish. The part is active in production and widely used in industrial and commercial applications requiring reliable signal transmission in compact form factors.

Equivalent and substitute parts are necessary when the primary part is unavailable, when supply chain optimization is required, or when design flexibility allows for alternative manufacturers meeting identical or superior electrical and mechanical specifications.

Substiute Parts

09562625813

HARTINGIn Stock: 97709562625813 Datasheet

Current PartRFQ

10090926-P264VLF

Amphenol ICC (FCI)In Stock: 204910090926-P264VLF Datasheet

MFR RecommendedRFQ

10090926-P264XLF

Amphenol ICC (FCI)In Stock: 224810090926-P264XLF Datasheet

MFR RecommendedRFQ

633-026-263-032

Mercury United Electronics, Inc.In Stock: 1255633-026-263-032 Datasheet

MFR RecommendedRFQ

L17HTHAP4F1C

Amphenol ICC (Commercial Products)In Stock: 1075L17HTHAP4F1C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09562625813 is determined by strict equivalence across the following critical parameters:

Core Electrical & Mechanical Compatibility:

• Connector style: D-Sub, High Density
• Connector type: Plug, Male Pins
• Position count: 26 positions, 3 rows
• Shell size and layout: 2 (DA, A) High Density
• Termination method: Solder
• Mounting configuration: Through Hole, Right Angle
• Backset spacing: 0.350" (8.89mm)
• Contact material: Copper Alloy
• Shell material: Steel, Nickel Plated

Compliance & Environmental:

• Material flammability: UL94 V-0
• RoHS compliance: ROHS3 or RoHS Compliant
• Moisture sensitivity: MSL 1 (Unlimited)

Acceptable Variations:

• Contact finish: Gold or Gold-Palladium (Flash or 30.0µin thickness)
• Current rating: Equal to or greater than 2A
• Operating temperature range: Must encompass or exceed -40°C ~ 85°C
• Voltage rating: When specified, must be adequate for signal applications
• Flange feature configuration: Mating side or board side mounting variations

The following parts meet these substitution criteria and are qualified equivalents.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts listed are active production components with full RoHS compliance and equivalent mechanical and electrical characteristics to the HARTING 09562625813.

Amphenol ICC 10090926-P264VLF and 10090926-P264XLF provide enhanced current ratings (2.5A per contact) and extended operating temperature range (-55°C ~ 105°C) compared to the primary part. These parts differ in flange configuration: the P264VLF features mating side female screwlock, while the P264XLF features board side mounting. Both are suitable for applications requiring higher thermal performance or increased current capacity.

Mercury United Electronics 633-026-263-032 offers the highest current rating (3A per contact) and includes shielding features. Operating temperature range matches the primary part (-55°C ~ 85°C). The housing/shell flange configuration provides an alternative mounting approach.

Amphenol ICC L17HTHAP4F1C delivers the highest operating temperature capability (-55°C ~ 150°C) and voltage rating (300V), with 3A current rating. Shell finish is tin-plated rather than nickel-plated. This part is optimal for high-temperature applications.

All substitute parts maintain identical position count, row configuration, shell size, backset spacing, and solder termination method. Selection should be based on specific application requirements for current capacity, operating temperature range, voltage rating, and flange mounting configuration.

Frequently Asked Questions (FAQ)

Q: Can I substitute the HARTING 09562625813 with any of these parts directly?

A: Yes. All listed parts are mechanically and electrically compatible. They share identical connector style, position count, shell size, backset spacing, and termination method. Physical board layout compatibility depends on flange feature configuration and mounting type variations.

Q: What is the difference between the two Amphenol ICC 10090926 variants?

A: The 10090926-P264VLF features mating side female screwlock flange, while the 10090926-P264XLF features board side flange. Both provide identical electrical performance and current rating. Selection depends on mechanical mounting requirements and available board space.

Q: Does the Mercury 633-026-263-032 include shielding?

A: Yes. The Mercury part includes shielding features in addition to standard board lock and grounding indents. This provides enhanced electromagnetic interference rejection compared to non-shielded alternatives.

Q: Which substitute part supports the highest operating temperature?

A: The Amphenol ICC L17HTHAP4F1C supports -55°C ~ 150°C, the widest temperature range among all listed parts. This part is specified for high-temperature industrial applications.

Q: Are all parts RoHS compliant?

A: Yes. All substitute parts are RoHS compliant (either ROHS3 or RoHS Compliant status). The primary HARTING part is ROHS3 compliant.

Q: What is the difference in contact finish between parts?

A: The primary HARTING part specifies 30.0µin (0.76µm) contact finish thickness. All substitute parts use flash gold finish, which provides adequate contact resistance and durability for signal applications while reducing material cost.

Q: Can I use the L17HTHAP4F1C in place of the HARTING part if my application requires higher voltage?

A: The L17HTHAP4F1C is rated for 300V, compared to the primary part which does not specify voltage rating. If your application requires voltage rating specification, the L17HTHAP4F1C provides documented 300V capability. Verify that your application requirements align with this specification.

Q: What is the current capacity difference between parts?

A: The primary HARTING part is rated 2A. Substitute parts offer higher ratings: Amphenol ICC variants provide 2.5A per contact, while Mercury and Amphenol ICC L17HTHAP4F1C provide 3A per contact. Higher-rated parts are backward compatible with 2A applications.

Q: Do all parts have the same moisture sensitivity level?

A: Yes. All parts, including the primary HARTING connector, are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.