HARTING 09561617700 D-Sub High Density Connector - Equivalent & Substitute Parts

Part Overview

The HARTING 09561617700 is a 15-position D-Sub high density plug connector with male pins, designed for through-hole solder termination. This connector is actively manufactured and stocked with 1003 units available. The part is RoHS3 compliant and rated for -40°C to 85°C operation with a 2A current capacity per contact. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements necessitate enhanced electrical or mechanical specifications.

Substiute Parts

09561617700

HARTINGIn Stock: 104309561617700 Datasheet

Current PartRFQ

10090928-P154VLF

Amphenol ICC (FCI)In Stock: 683710090928-P154VLF Datasheet

MFR RecommendedRFQ

10090928-P154XLF

Amphenol ICC (FCI)In Stock: 140810090928-P154XLF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09561617700 is determined by strict alignment with the following core parameters:

Critical Matching Parameters:

• Connector style: D-Sub, High Density
• Connector type: Plug, Male Pins
• Number of positions: 15
• Number of rows: 3
• Shell size and layout: 1 (DE, E) High Density
• Mounting type: Through Hole
• Termination method: Solder
• Shell material and finish: Steel, Nickel Plated
• Contact material: Copper Alloy
• Flammability rating: UL94 V-0
• Moisture sensitivity level: 1 (Unlimited)

The identified substitute parts, 10090928-P154VLF and 10090928-P154XLF from Amphenol ICC (FCI), meet all critical matching parameters. Both parts are manufactured to the same D-Sub high density 15-position configuration with identical mechanical and environmental specifications. The substitutes provide enhanced electrical performance through increased current rating (2.5A per contact versus 2A) and extended operating temperature range (-55°C to 105°C versus -40°C to 85°C), while maintaining full compliance with RoHS and REACH requirements.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status and full compliance with RoHS and REACH regulations. The HARTING 09561617700 is suitable for applications within its specified operating temperature range of -40°C to 85°C and 2A current requirements. The Amphenol ICC substitutes (10090928-P154VLF and 10090928-P154XLF) provide extended operational capability with a wider temperature range (-55°C to 105°C) and higher current rating (2.5A per contact), making them appropriate for demanding environmental conditions or higher-power applications. Both Amphenol ICC parts feature gold-plated contacts with flash thickness and board-lock mechanisms, providing enhanced durability and mechanical retention compared to the HARTING part's unthreaded housing design. Selection between the two Amphenol ICC variants depends on specific flange configuration requirements: the 10090928-P154VLF includes both board-side and mating-side screwlock features, while the 10090928-P154XLF provides board-side screwlock only.

Frequently Asked Questions (FAQ)

Q: What determines if a D-Sub connector can substitute for the HARTING 09561617700?

A: A substitute must match the following specifications: D-Sub high density style, 15-position plug configuration with male pins, 3-row layout, shell size 1 (DE, E), through-hole mounting, solder termination, steel nickel-plated shell, copper alloy contacts, UL94 V-0 flammability rating, and MSL 1 moisture sensitivity level.

Q: Are the Amphenol ICC parts fully compatible with the HARTING 09561617700?

A: The Amphenol ICC parts 10090928-P154VLF and 10090928-P154XLF are mechanically and electrically compatible as direct substitutes. They maintain identical connector geometry, pin configuration, and core electrical specifications. The substitutes offer enhanced performance through higher current ratings and extended temperature range.

Q: What is the difference between the two Amphenol ICC substitute parts?

A: Both 10090928-P154VLF and 10090928-P154XLF share identical electrical and mechanical specifications. The primary difference is in flange configuration: the P154VLF includes female screwlock features on both the board side and mating side, while the P154XLF provides board-side screwlock only. Selection depends on the specific mounting and mating requirements of your application.

Q: Can I use these substitutes in applications requiring -55°C operation?

A: The Amphenol ICC substitutes are rated for -55°C to 105°C operation, making them suitable for low-temperature applications. The HARTING 09561617700 is rated only to -40°C, so substitution is necessary for applications requiring lower temperature performance.

Q: Are all three parts RoHS compliant?

A: Yes. The HARTING 09561617700 is ROHS3 compliant, and both Amphenol ICC substitutes are RoHS compliant. All three parts are REACH unaffected and suitable for regulated markets.

Q: What is the significance of the gold contact finish on the Amphenol ICC parts?

A: The gold flash finish on the Amphenol ICC substitutes provides enhanced corrosion resistance and improved contact reliability compared to unspecified contact finish on the HARTING part. This is particularly beneficial in harsh environments or applications requiring extended service life.