Equivalent & Substitute Parts for Molex 0934454601

Part Overview

The Molex 0934454601 is a 6-position rectangular connector housing plug in the ML-XT 93445 series, designed for applications requiring crimp termination and latch lock fastening. This component features IP68 rating and operates across -55°C to 125°C. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and procurement planning.

Key Parameters

Parameter	Value
Connector Type	Plug
Contact Type	Female Socket
Number of Positions	6
Number of Rows	2
Mounting Type	Free Hanging (In-Line)
Contact Termination	Crimp
Fastening Type	Latch Lock
Color	Black
Operating Temperature	-55°C to 125°C
Features	Heat Shrink, IP68
Insulation Material	Polyamide (PA), Nylon

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0934454601 is determined by the following critical parameters:

Connector Type & Contact Configuration: Must be plug type with female socket contacts
Position Count: Must accommodate 6 positions
Termination Method: Must support crimp termination
Fastening Mechanism: Must utilize latch lock fastening
Environmental Rating: Must maintain IP68 sealing capability
Temperature Range: Must support -55°C to 125°C operation
Mounting Configuration: Must support free hanging in-line installation
Color & Appearance: Black housing for visual identification consistency

The substitute parts identified (DT06-6S-EP11 and AT06-6S-SR01BLK) meet these core functional requirements. Variations in row configuration (3 rows vs. 2 rows) and supplementary features (gasket blocking, strain relief) represent design enhancements that do not compromise backward compatibility when mechanical envelope constraints are satisfied.

Parameter Comparison

Parameter	Molex 0934454601	TE Connectivity DT06-6S-EP11	Amphenol AT06-6S-SR01BLK
Connector Type	Plug	Plug	Plug
Contact Type	Female Socket	Female Socket	Female Socket
Number of Positions	6	6	6
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Free Hanging (In-Line)
Contact Termination	Crimp	Crimp	Crimp
Fastening Type	Latch Lock	Latch Lock	Latch Lock
Color	Black	Black	Black
Operating Temperature	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C
IP Rating	IP68	IP68, IP6K9K	IP68
Product Status	Obsolete	Active	Active
RoHS Compliance	Not specified	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

TE Connectivity DT06-6S-EP11 is suitable for applications where enhanced environmental protection is required. This part carries ROHS3 compliance and REACH unaffected status, with active product status ensuring long-term availability. The addition of blocked gasket and IP6K9K rating provides superior protection in high-pressure wash environments.

Amphenol AT06-6S-SR01BLK is recommended for applications requiring strain relief integration. This part maintains ROHS3 compliance and REACH unaffected status with active product status. The strain relief feature reduces mechanical stress on crimp terminations during cable flexing and installation.

Both substitute parts maintain electrical and mechanical compatibility with the original Molex 0934454601 specification across all critical parameters. Selection between substitutes should be based on specific application requirements regarding environmental protection level and mechanical stress management.

Frequently Asked Questions (FAQ)

Q: Can DT06-6S-EP11 and AT06-6S-SR01BLK be used interchangeably with the Molex 0934454601?

A: Both parts satisfy the core functional requirements of the original component: 6-position plug housing with female socket contacts, crimp termination, latch lock fastening, and IP68 environmental rating across the specified temperature range. Interchangeability depends on mechanical envelope constraints specific to your application. The row configuration difference (3 rows vs. 2 rows) must be evaluated against available mounting space.

Q: What is the significance of the row configuration difference?

A: The Molex 0934454601 uses a 2-row configuration, while both substitute parts employ 3-row configurations. This affects the physical footprint and contact density. Verify that your application's mechanical envelope accommodates the substitute part's dimensions before implementation.

Q: Are the substitute parts RoHS compliant?

A: Yes. Both DT06-6S-EP11 and AT06-6S-SR01BLK are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What additional features do the substitute parts provide?

A: DT06-6S-EP11 includes blocked gasket and IP6K9K rating for enhanced high-pressure wash protection. AT06-6S-SR01BLK includes integrated strain relief to reduce mechanical stress on crimp connections during cable flexing and installation.

Q: Are contacts included with these connector housings?

A: No. All three parts (original and substitutes) are supplied as housings only. Contacts must be procured separately and crimped according to manufacturer specifications.

Q: What is the current inventory status?

A: Molex 0934454601 (obsolete): 861 pieces. TE Connectivity DT06-6S-EP11 (active): 704 pieces. Amphenol AT06-6S-SR01BLK (active): 2108 pieces.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message