Equivalent & Substitute Parts for Molex 0934452602

Part Overview

The Molex 0934452602 is a 3-circuit rectangular connector plug housing in gray, featuring a large seal and heat-resistant design. Classified as a rectangular connector housing, this component is designated as obsolete, necessitating identification of active equivalent alternatives for ongoing procurement and system integration. Substitute parts must maintain functional compatibility through matching electrical and mechanical specifications.

Substiute Parts

0934452602

MolexIn Stock: 6900934452602 Datasheet

Current PartRFQ

DT06-3S-E008

TE Connectivity Deutsch ConnectorsIn Stock: 2762DT06-3S-E008 Datasheet

DirectRFQ

AT06-3S-SR01GRY

Amphenol Sine Systems CorpIn Stock: 917AT06-3S-SR01GRY Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Equivalent substitutes for the Molex 0934452602 are identified based on the following critical parameters that determine functional interchangeability:

• Connector Category: Rectangular Connectors - Housings
• Connector Type: Plug configuration
• Number of Positions: 3-position housing
• Number of Rows: 2-row arrangement
• Color: Gray
• Mounting Type: Free Hanging (In-Line)
• Contact Termination: Crimp
• Fastening Type: Latch Lock
• Operating Temperature Range: -55°C ~ 125°C
• RoHS Compliance: ROHS3 Compliant

Both identified substitutes match these core parameters, ensuring mechanical and electrical compatibility with the original Molex component.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts are classified as active products with current manufacturing support, addressing the obsolescence status of the original Molex component. Selection between TE Connectivity DT06-3S-E008 and Amphenol AT06-3S-SR01GRY should be based on the following compliance and certification factors:

TE Connectivity DT06-3S-E008: ROHS3 Compliant, REACH Unaffected, rated for IP68 and IP6K9K protection levels with shrink boot adapter features.

Amphenol AT06-3S-SR01GRY: ROHS3 Compliant, REACH Unaffected, rated for IP67 protection with integrated cap (cover) and strain relief features.

Both parts meet regulatory requirements and temperature specifications. The choice between them depends on the specific environmental protection requirements of the application, with the TE Connectivity option providing higher ingress protection ratings and the Amphenol option offering integrated strain relief and protective cap.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity DT06-3S-E008 directly replace the Molex 0934452602?

A: Yes. Both components share identical specifications for connector type, position count, row configuration, color, mounting type, termination method, fastening mechanism, and operating temperature range. Both are ROHS3 compliant.

Q: What is the difference between the two substitute options?

A: The primary differences are in protection ratings and integrated features. The TE Connectivity DT06-3S-E008 provides IP68 and IP6K9K ratings with a shrink boot adapter. The Amphenol AT06-3S-SR01GRY provides IP67 rating with an integrated cap and strain relief. Both meet the core electrical and mechanical requirements of the original part.

Q: Are contacts included with these substitute housings?

A: No. Both substitute parts are supplied as housings only, with contacts not included. This matches the original Molex component specification.

Q: What packaging formats are available for the substitutes?

A: TE Connectivity DT06-3S-E008 is supplied in bulk packaging. Amphenol AT06-3S-SR01GRY is supplied in box packaging.

Q: Do the substitute parts maintain the same operating temperature range?

A: Yes. Both substitute parts operate across the identical temperature range of -55°C to 125°C, matching the original Molex specification.

Q: Are there any REACH or environmental compliance differences between the options?

A: No. Both substitute parts are ROHS3 compliant and REACH unaffected, maintaining full regulatory compliance with the original component.