HARTING 09233486921 DIN 41612 Backplane Connector - Equivalent & Substitute Parts

Part Overview

The HARTING 09233486921 is a 48-position DIN 41612 backplane connector header with male pins, gold-plated contacts, and right-angle through-hole mounting. This connector is classified as an active product with ROHS3 compliance and UL94 V-0 material flammability rating. Alternative equivalent parts may be required due to inventory availability, lead time considerations, or specific application requirements where functionally compatible substitutes meet the same electrical and mechanical specifications.

Substiute Parts

09233486921

HARTINGIn Stock: 86509233486921 Datasheet

Current PartRFQ

5650916-5

TE Connectivity AMP ConnectorsIn Stock: 802715650916-5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09233486921 is determined by the following critical parameters:

• Connector Configuration: 48 positions, 3 rows, 0.100" (2.54mm) pitch
• Connector Type: Male pins with gold contact finish
• Mounting Orientation: Right-angle through-hole PCB mounting
• Electrical Compliance: ROHS3 compliant, UL94 V-0 material rating
• Termination Method: Solder termination

The TE Connectivity AMP Connectors part 5650916-5 qualifies as a substitute based on matching these core parameters. Both connectors share identical position count, pitch spacing, row configuration, gold plating, right-angle mounting, and equivalent compliance certifications. The primary distinction lies in connector style designation (2C versus C/2) and series classification (DIN 41612 versus Eurocard), which represent different standardization frameworks for the same physical and electrical interface.

Parameter Comparison

Engineering Selection Recommendations

Both the HARTING 09233486921 and TE Connectivity 5650916-5 are active products with current manufacturing status and equivalent compliance certifications. Selection between these parts should be based on:

• Inventory Availability: HARTING 09233486921 has 829 units in stock; TE Connectivity 5650916-5 has 80,198 units available
• Regulatory Compliance: Both parts meet ROHS3 requirements and UL94 V-0 material standards
• Physical Interface Compatibility: Identical pitch, position count, row configuration, and right-angle mounting ensure mechanical interchangeability
• Contact Specifications: Both employ gold-plated male pins with solder termination

The TE Connectivity part offers significantly higher inventory availability, which may be advantageous for supply chain planning and lead time reduction.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5650916-5 directly replace the HARTING 09233486921 in existing designs?

A: Yes. Both connectors share identical electrical and mechanical specifications: 48 positions, 0.100" pitch, 3-row configuration, gold contact finish, right-angle through-hole mounting, and solder termination. The physical interface is compatible.

Q: What is the difference between DIN 41612 and Eurocard series designations?

A: These represent different standardization frameworks applied to connectors with identical physical and electrical characteristics. Both series employ the same 0.100" pitch, 48-position, 3-row configuration used in this application.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant, carry UL94 V-0 material flammability ratings, and meet equivalent regulatory requirements.

Q: What is the significance of the "Header" versus "Plug" connector type designation?

A: In DIN 41612 and Eurocard standards, "Header" and "Plug" refer to complementary connector halves designed to mate together. The HARTING part is the header (receptive side), while the TE Connectivity part is the plug (insertable side). These designations do not affect substitution eligibility when used in their intended mating configurations.

Q: Does contact finish thickness affect substitution compatibility?

A: Contact finish thickness is not specified for the TE Connectivity part. Both parts employ gold plating suitable for solder termination and equivalent electrical performance in standard backplane connector applications.