HARTING 09200100321 Equivalent & Substitute Parts

Part Overview

The HARTING 09200100321 is a heavy duty connector base designed for panel mount applications with bottom entry configuration. This Han® A series connector delivers IP65 ingress protection suitable for dust-tight and water-resistant environments. The component is actively produced and maintains full RoHS3 compliance with unlimited moisture sensitivity rating. Substitute parts become necessary when addressing supply chain constraints, regional availability, or specific application requirements while maintaining equivalent electrical and mechanical performance.

Substiute Parts

09200100321

HARTINGIn Stock: 97609200100321 Datasheet

Current PartRFQ

C14610F0150032

Amphenol Tuchel IndustrialIn Stock: 1028C14610F0150032 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09200100321 is determined by strict alignment of the following parameters:

• Connector Type: Must be Base - Panel Mount configuration
• Style: Must maintain Bottom Entry design
• Size Designation: Must be equivalent to 10A or A10 sizing standard
• Ingress Protection: Must meet or exceed IP65 rating
• Operating Temperature: Must support minimum -40°C to 100°C range
• Housing Material: Aluminum die-cast construction
• Dimensions: Physical envelope 81.00mm x 29.50mm x 26.00mm
• Compliance: RoHS3 and REACH requirements

The Amphenol Tuchel Industrial C14610F0150032 qualifies as a direct substitute based on matching all critical parameters within the heavy duty connector base category.

Parameter Comparison

Engineering Selection Recommendations

Both the HARTING 09200100321 and Amphenol Tuchel Industrial C14610F0150032 maintain active production status with full RoHS3 and REACH compliance. Selection between these parts should be based on:

• Supply availability: Current inventory levels and lead times from respective manufacturers
• Regional sourcing: Distributor network and logistics optimization
• Temperature margin requirements: Applications operating above 100°C require the HARTING part due to its 125°C maximum rating
• Series compatibility: HARTING Han® A series versus Amphenol heavymate® series integration with existing connector ecosystems

Both parts satisfy identical mechanical envelope and ingress protection requirements for panel mount bottom entry applications.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol C14610F0150032 replace the HARTING 09200100321 in all applications?

A: The Amphenol substitute is compatible for applications operating within -40°C to 100°C. Applications requiring operation above 100°C must use the HARTING part, which is rated to 125°C.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts share identical dimensions of 81.00mm x 29.50mm x 26.00mm, ensuring equivalent panel mount footprint and mechanical fit.

Q: Do both parts meet the same compliance standards?

A: Both parts are RoHS3 compliant, REACH unaffected, and carry MSL rating 1 (unlimited moisture sensitivity). Compliance requirements are satisfied by either part.

Q: What is the difference between 10A and A10 size designations?

A: These designations represent equivalent sizing standards within their respective manufacturer series. The 10A (HARTING Han® A) and A10 (Amphenol heavymate®) are functionally equivalent for this connector category.

Q: Are the locking mechanisms identical?

A: Both parts feature a single locking clip located on the base bottom, providing equivalent mechanical retention for panel mount applications.

Q: What ingress protection level do these connectors provide?

A: Both parts deliver IP65 rating, providing dust-tight and water-resistant protection suitable for industrial environments.