HARTING 09200030820 Equivalent & Substitute Parts

Part Overview

The HARTING 09200030820 is an active, production-status heavy duty connector base designed for panel mount 90° applications with side entry configuration. This Han® A series connector operates across -40°C to 125°C and provides IP44 ingress protection suitable for industrial environments. The part is ROHS3 compliant and carries unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified to provide equivalent functional performance when the primary part is unavailable, with consideration for mechanical compatibility, electrical ratings, and environmental protection specifications.

Substiute Parts

09200030820

HARTINGIn Stock: 88609200030820 Datasheet

Current PartRFQ

C14610F0030044

Amphenol Tuchel IndustrialIn Stock: 1007C14610F0030044 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09200030820 is determined by the following critical parameters:

Mechanical Compatibility: Panel mount 90° base connector configuration with side entry orientation and locking clip mechanism on base bottom.

Size Rating: 3A connector size class, which defines contact capacity and mating interface geometry.

Environmental Protection: IP44 minimum ingress protection rating for dust and water resistance.

Thermal Performance: Operating temperature range of -40°C to 125°C or equivalent.

Regulatory Compliance: ROHS3 compliance and REACH unaffected status.

The identified substitute part maintains these core parameters within acceptable industrial connector standards, ensuring functional interchangeability in equivalent applications.

Parameter Comparison

Engineering Selection Recommendations

Both parts maintain ROHS3 compliance and REACH unaffected status, meeting regulatory requirements for industrial applications. The Amphenol C14610F0030044 provides enhanced ingress protection at IP65 versus the HARTING part's IP44 rating, suitable for more demanding environmental conditions. The HARTING 09200030820 supports a higher maximum operating temperature of 125°C compared to the Amphenol substitute's 100°C limit. Selection should be based on specific application thermal and environmental protection requirements within the stated operating ranges.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol C14610F0030044 directly replace the HARTING 09200030820?

A: Both parts share identical mechanical form factors (panel mount 90° base with side entry), locking mechanisms, and dimensional compatibility within 0.5mm variance. Size designations (3A versus A3/4) represent equivalent contact capacity in their respective series. Direct mechanical substitution is supported.

Q: What is the difference in ingress protection ratings?

A: The HARTING part provides IP44 protection (splash resistant). The Amphenol substitute provides IP65 protection (dust tight, water resistant). IP65 offers enhanced environmental sealing and is suitable for applications requiring greater protection against liquid ingress.

Q: Are there temperature limitations when substituting?

A: The Amphenol substitute operates to 100°C maximum, while the HARTING part operates to 125°C. Applications requiring sustained operation above 100°C must use the HARTING part. Applications within -40°C to 100°C range support either part.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting equivalent regulatory requirements for industrial connector applications.

Q: What packaging is available?

A: Both parts are supplied in bulk packaging format.