HARTING 09195346323 Equivalent & Substitute Parts

Part Overview

The HARTING 09195346323 is a rectangular connector header designed for through-hole, right-angle mounting applications. This shrouded 34-position connector operates at 2.54mm pitch and features male pins with solder termination and latch holder fastening. The part is currently active in production with 751 units in stock. Equivalent and substitute parts are identified based on matching core electrical and mechanical parameters: 34 positions, 2-row configuration, 2.54mm pitch, through-hole right-angle mounting, shrouded 4-wall design, and solder termination.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	34
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Shape	Square
Material Flammability Rating	UL94 V-0
Operating Temperature Range	-55°C ~ 125°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following core parameters:

Connector Configuration: 34 positions, 2 rows, 2.54mm mating pitch, 2.54mm row spacing
Mounting & Orientation: Through-hole, right-angle mounting
Shrouding: Shrouded 4-wall design
Termination Method: Solder termination
Contact Geometry: Square male pins
Compliance: UL94 V-0 flammability rating, MSL 1

All identified substitute parts meet these core requirements. Variations in contact material, contact finish specifications, insulation material, fastening type (latch holder vs. push-pull), and operating temperature ranges do not preclude substitution when the core parameters align. Packaging format (bulk, tray, tube) is a logistics consideration and does not affect electrical or mechanical compatibility.

Parameter Comparison

Parameter	HARTING 09195346323	TE 103310-7	TE 3-1761605-1	3M 30334-5002HB	TE 5103310-7	TE 5103311-7	Amphenol 75867-106LF	3M D2534-5002-AR	Hirose HIF3FC-34PA-2.54DS(71)	3M N2534-5003RB
Manufacturer	HARTING	TE Connectivity	TE Connectivity	3M	TE Connectivity	TE Connectivity	Amphenol ICC (FCI)	3M	Hirose Electric	3M
Part Number	09195346323	103310-7	3-1761605-1	30334-5002HB	5103310-7	5103311-7	75867-106LF	D2534-5002-AR	HIF3FC-34PA-2.54DS(71)	N2534-5003RB
Series	SEK	AMP-Latch	AMP-Latch	303	AMP-Latch	AMP-Latch	Quickie™	D2500	HIF3FC	2500
Number of Positions	34	34	34	34	34	34	34	34	34	34
Number of Rows	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Material	Copper Alloy	Brass	Phosphor Bronze	Brass	Brass	Brass	Phosphor Bronze	Brass	Brass	Copper Alloy
Contact Finish - Mating	Not specified	Gold or Gold-Palladium	Gold	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold, GXT™	Gold	Gold	Gold
Contact Finish - Post	Not specified	Tin-Lead	Tin	Gold	Tin	Tin	Tin	Tin	Tin	Tin
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature Range	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-55°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	Not specified	-55°C ~ 105°C	-55°C ~ 85°C	-55°C ~ 105°C
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
RoHS Status	ROHS3 Compliant	Not applicable	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Inventory Availability	751 Pcs	734 Pcs	2998 Pcs	3056 Pcs	7288 Pcs	1293 Pcs	1425 Pcs	1749 Pcs	997 Pcs	1422 Pcs

Engineering Selection Recommendations

All listed substitute parts maintain active product status and meet the core mechanical and electrical requirements for direct substitution with the HARTING 09195346323. Selection among substitutes should be based on the following factors:

RoHS Compliance: The HARTING 09195346323 is ROHS3 compliant. Substitute parts with ROHS3 compliance include TE 3-1761605-1, TE 5103310-7, TE 5103311-7, 3M D2534-5002-AR, and Hirose HIF3FC-34PA-2.54DS(71). The TE 103310-7 is marked as "Not applicable" for RoHS status. The 3M 30334-5002HB and 3M N2534-5003RB carry RoHS Compliant designation without ROHS3 specification.

Operating Temperature Range: The HARTING 09195346323 operates from -55°C to 125°C. Most substitutes operate within -55°C to 105°C, which covers the lower end of the original specification. The Hirose HIF3FC-34PA-2.54DS(71) has a narrower range of -55°C to 85°C and should be selected only when the application does not require operation above 85°C.

Fastening Type Variation: The HARTING 09195346323 uses latch holder fastening. Most substitutes employ push-pull fastening, which represents a functional difference in mating mechanism. This variation does not affect electrical compatibility but may require design consideration for connector engagement and release procedures.

Packaging Format: Substitute parts are available in bulk, tray, and tube packaging. Selection should align with procurement and assembly requirements. Packaging does not affect connector performance.

Inventory Availability: TE 5103310-7 offers the highest inventory level at 7288 units, followed by 3M 30334-5002HB at 3056 units and TE 3-1761605-1 at 2998 units.

Frequently Asked Questions (FAQ)

Q: Can I substitute the HARTING 09195346323 with any of the listed parts?

A: Yes. All listed parts meet the core substitution criteria: 34 positions, 2 rows, 2.54mm pitch, through-hole right-angle mounting, shrouded 4-wall design, and solder termination. Electrical and mechanical compatibility is maintained across all substitutes.

Q: What is the difference between latch holder and push-pull fastening?

A: The HARTING 09195346323 uses latch holder fastening, while most substitutes employ push-pull fastening. Both mechanisms secure the mated connector pair. Latch holder fastening typically uses a latching mechanism that engages during mating. Push-pull fastening uses a pull-to-disconnect mechanism. The choice depends on application requirements for connector retention and ease of disconnection.

Q: Does the operating temperature range difference affect substitution?

A: The HARTING 09195346323 operates from -55°C to 125°C. Most substitutes operate from -55°C to 105°C, which is acceptable for applications within this range. The Hirose HIF3FC-34PA-2.54DS(71) operates from -55°C to 85°C and should be selected only when the application does not exceed 85°C.

Q: Are all substitute parts RoHS compliant?

A: Most substitutes carry RoHS or ROHS3 compliance. The TE 103310-7 is marked as "Not applicable" for RoHS status. For applications requiring ROHS3 compliance specifically, select from TE 3-1761605-1, TE 5103310-7, TE 5103311-7, 3M D2534-5002-AR, or Hirose HIF3FC-34PA-2.54DS(71).

Q: Does packaging format affect connector performance?

A: No. Packaging format (bulk, tray, tube) is a logistics and procurement consideration only. It does not affect electrical or mechanical performance. Selection should be based on assembly process requirements and inventory management.

Q: What contact material variations exist among substitutes?

A: Substitute parts use either copper alloy, brass, or phosphor bronze for contact material. All materials are suitable for the 2.54mm pitch, 34-position header application. Contact material selection by manufacturers reflects design optimization for specific performance characteristics but does not preclude substitution.

Q: Can I mix substitute parts in the same assembly?

A: Yes. All substitute parts are mechanically and electrically compatible with the HARTING 09195346323 and with each other, provided they are mated with compatible receptacle connectors designed for 2.54mm pitch, 34-position headers.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message