HARTING 09195167913 Equivalent & Substitute Parts

Part Overview

The HARTING 09195167913 is a rectangular connector header, right-angle configuration, with 16 positions at 2.54mm pitch. This through-hole, shrouded male pin connector is designed for board-to-cable/wire applications with solder termination and latch lock/eject hook fastening. The part is active in production with 751 units in current inventory. Equivalent and substitute parts are identified based on matching electrical and mechanical specifications to support design flexibility, supply chain alternatives, and manufacturing continuity.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	16
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Style	Board to Cable/Wire
Operating Temperature Range	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following core parameters:

Connector Type & Contact Configuration: Header with male pins
Position Count & Arrangement: 16 positions in 2-row configuration
Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
Mounting & Orientation: Through-hole, right-angle mounting
Shrouding: 4-wall shrouded design
Termination Method: Solder termination
Fastening Type: Latch lock/eject hook mechanism
Compliance Standards: UL94 V-0 flammability rating, RoHS compliance, MSL 1

Substitute parts are grouped by manufacturer and series. Variations in contact post length, contact finish specifications, insulation height, and operating temperature ranges are documented but do not preclude substitution when the core parameters align. Packaging format (bulk, tray, tube) is noted for procurement purposes.

Parameter Comparison

Parameter	HARTING 09195167913	TE 5102322-3	TE 5499141-3	TE 5499913-3	Amphenol 71922-116LF	3M N3408-5202RB	3M N3408-5302RB	3M N3408-5303RB
Manufacturer	HARTING	TE Connectivity AMP	TE Connectivity AMP	TE Connectivity AMP	Amphenol ICC (FCI)	3M	3M	3M
Series	SEK	AMP-Latch	AMP-Latch	AMP-Latch	Quickie™	3000	3000	3000
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	16	16	16	16	16	16	16	16
Number of Rows	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Style	Board to Cable/Wire	Board to Cable/Wire	Board to Cable/Wire	Board to Cable/Wire	Board to Cable/Wire	Board to Board or Cable	Board to Board or Cable	Board to Board or Cable
Fastening Type	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Long	Latch Lock/Eject Hooks, Long	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Long	Latch Lock/Eject Hooks, Long
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.228" (5.80mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)
Contact Length - Post	0.114" (2.90mm)	0.155" (3.94mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.114" (2.90mm)	0.112" (2.84mm)	0.112" (2.84mm)	0.155" (3.94mm)
Insulation Height	0.335" (8.51mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.339" (8.61mm)	0.340" (8.64mm)	0.340" (8.64mm)	0.340" (8.64mm)
Contact Material	Copper Alloy	Brass	Brass	Brass	Phosphor Bronze	Copper Alloy	Copper Alloy	Copper Alloy
Contact Finish - Mating	Not specified	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold, GXT™	Gold	Gold	Gold
Contact Finish - Post	Not specified	Tin	Tin	Tin	Tin	Tin	Tin	Tin
Operating Temperature	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	Not specified	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging	Bulk	Tray	Tray	Bulk	Tube	Bulk	Tray	Bulk
Inventory Status	751 Pcs	1766 Pcs	72899 Pcs	1557 Pcs	2100 Pcs	1215 Pcs	2070 Pcs	1206 Pcs

Engineering Selection Recommendations

All substitute parts listed maintain active product status and comply with UL94 V-0 flammability requirements and RoHS standards. Selection among substitutes should be based on the following engineering considerations:

TE Connectivity AMP-Latch Series (5102322-3, 5499141-3, 5499913-3): These parts offer ROHS3 compliance and extended inventory availability. The 5499141-3 variant provides the highest stock level (72,899 units) and is suitable for high-volume applications. Fastening hook length varies between long and short configurations; verify mechanical clearance requirements in the target application.

Amphenol ICC Quickie™ Series (71922-116LF): This part features phosphor bronze contacts with GXT™ gold finish and is RoHS compliant. Contact mating length is 0.228" (5.80mm), which is slightly shorter than the reference part. Verify mechanical fit in confined spaces.

3M 3000 Series (N3408-5202RB, N3408-5302RB, N3408-5303RB): All three variants are RoHS compliant with copper alloy contacts and tin-plated posts. Operating temperature range is -55°C to 105°C. The N3408-5303RB offers the longest contact post (0.155" / 3.94mm), matching the TE 5102322-3 specification. Select based on fastening hook length (short vs. long) and packaging requirements (bulk vs. tray).

All substitute parts maintain the core 16-position, 2.54mm pitch, through-hole right-angle configuration with 4-wall shrouding and solder termination. Compliance certifications and MSL ratings are consistent across all options.

Frequently Asked Questions (FAQ)

Q: Can I substitute the HARTING 09195167913 with any of the listed parts?

A: Yes, all listed parts are functionally equivalent based on core electrical and mechanical parameters: 16-position, 2-row configuration at 0.100" (2.54mm) pitch, through-hole right-angle mounting, 4-wall shrouding, solder termination, and latch lock/eject hook fastening. Verify contact post length and fastening hook configuration for your specific PCB design.

Q: What is the difference between short and long fastening hooks?

A: Fastening hook length affects the mechanical engagement depth with the mating connector. Short hooks (HARTING 09195167913, TE 5499913-3, 3M N3408-5202RB) provide reduced engagement depth, while long hooks (TE 5102322-3, TE 5499141-3, 3M N3408-5302RB, 3M N3408-5303RB) provide extended engagement. Select based on your mating connector design and mechanical clearance constraints.

Q: Are there differences in contact post length among the substitutes?

A: Yes. Contact post lengths vary: 0.110" (2.79mm) for TE AMP-Latch series, 0.112" (2.84mm) for 3M N3408-5202RB and N3408-5302RB, 0.114" (2.90mm) for HARTING and Amphenol, and 0.155" (3.94mm) for TE 5102322-3 and 3M N3408-5303RB. Longer posts accommodate thicker PCBs. Verify your PCB thickness and solder pad design before selection.

Q: What is the difference between packaging formats?

A: Bulk packaging is loose components suitable for automated assembly. Tray packaging provides organized component presentation for pick-and-place equipment. Tube packaging is used for manual handling and lower-volume applications. Select based on your assembly process requirements.

Q: Do all parts meet RoHS compliance?

A: Yes, all listed parts are RoHS compliant. HARTING 09195167913, TE 5499141-3, and TE 5499913-3 are ROHS3 compliant. All others are RoHS compliant. Both certifications meet current regulatory requirements.

Q: What is the operating temperature range for each part?

A: HARTING 09195167913 operates from -55°C to 125°C. TE AMP-Latch series operates from -65°C to 105°C. 3M 3000 series operates from -55°C to 105°C. Amphenol Quickie™ operating temperature is not specified. Select based on your application's thermal requirements.

Q: Are contact finish specifications important for my application?

A: Contact finish affects electrical performance and environmental resistance. HARTING 09195167913 does not specify contact finish. TE and 3M parts feature gold or gold-palladium mating surfaces with tin-plated posts, providing corrosion resistance and reliable electrical contact. Amphenol features GXT™ gold finish. All finishes are suitable for standard industrial applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message