HARTING 09185647322 Equivalent & Substitute Parts

Part Overview

The HARTING 09185647322 is a rectangular connector header designed for through-hole mounting applications. This shrouded 64-position connector with 2.54mm pitch serves board-to-cable/wire interconnection requirements. The part is currently active in production with 930 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring 64-position rectangular connectors with matching electrical and mechanical specifications.

Substiute Parts

09185647322

HARTINGIn Stock: 100509185647322 Datasheet

Current PartRFQ

3-1761679-7

TE Connectivity AMP ConnectorsIn Stock: 9983-1761679-7 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09185647322 are identified based on strict equivalence of the following critical parameters:

• Connector Type & Contact Type: Header with Male Pin contacts
• Position Count & Configuration: 64 positions in 2-row arrangement
• Pitch Specifications: 0.100" (2.54mm) mating pitch and row spacing
• Mounting & Termination: Through-hole solder termination
• Shrouding: Shrouded 4-wall design
• Contact Geometry: Square contact shape with 0.240" (6.10mm) mating length
• Electrical Properties: Gold-plated mating contacts with tin-plated posts
• Environmental Compliance: UL94 V-0 flammability rating, ROHS3 compliance, MSL 1

The TE Connectivity AMP Connectors part 3-1761679-7 meets these core substitution criteria. Variations in contact material (Phosphor Bronze vs. Copper Alloy), contact post length (0.165" vs. 0.177"), fastening mechanism (Push-Pull vs. Latch Holder), and insulation color do not preclude functional equivalence in applications where these parameters are not design-critical.

Parameter Comparison

Engineering Selection Recommendations

Both the HARTING 09185647322 and TE Connectivity 3-1761679-7 are active production parts with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts is based on the following factors:

HARTING 09185647322 is specified when:

• Latch Holder fastening mechanism is required
• Copper Alloy contact material is a design requirement
• Glass-filled PBT insulation is specified
• Operating temperature range of -55°C to 125°C is required
• Gray insulation color is required for assembly or identification purposes

TE Connectivity 3-1761679-7 is specified when:

• Push-Pull fastening mechanism is acceptable or preferred
• Phosphor Bronze contact material meets application requirements
• Standard PBT insulation is acceptable
• Blue insulation color is compatible with assembly or identification requirements
• Contact post length of 0.165" (4.19mm) accommodates PCB thickness and design constraints

Both parts share identical pitch, position count, shrouding configuration, and mating contact specifications. Selection should be based on mechanical fastening preference, contact material compatibility, and insulation material requirements specific to the application.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 3-1761679-7 be used as a direct replacement for the HARTING 09185647322?

A: The TE Connectivity part is functionally equivalent for applications where the fastening mechanism (Push-Pull vs. Latch Holder), contact material (Phosphor Bronze vs. Copper Alloy), and contact post length (0.165" vs. 0.177") are not design-critical. Both parts maintain identical pitch, position count, shrouding, and mating contact specifications. Design verification is required for applications with specific mechanical or electrical requirements tied to these parameters.

Q: What are the key differences between these two 64-position connectors?

A: The primary differences are: (1) Fastening Type—HARTING uses Latch Holder while TE Connectivity uses Push-Pull; (2) Contact Material—HARTING uses Copper Alloy while TE Connectivity uses Phosphor Bronze; (3) Contact Post Length—HARTING is 0.177" (4.50mm) while TE Connectivity is 0.165" (4.19mm); (4) Insulation Material—HARTING specifies glass-filled PBT while TE Connectivity uses standard PBT; (5) Insulation Color—HARTING is gray while TE Connectivity is blue. All other electrical and mechanical parameters are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both the HARTING 09185647322 and TE Connectivity 3-1761679-7 are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings.

Q: What is the operating temperature range for these connectors?

A: The HARTING 09185647322 specifies an operating temperature range of -55°C to 125°C. The TE Connectivity 3-1761679-7 does not provide an operating temperature specification in the available data.

Q: How do the contact post lengths differ and does this affect PCB compatibility?

A: The HARTING part has a contact post length of 0.177" (4.50mm) while the TE Connectivity part is 0.165" (4.19mm). This 0.012" (0.31mm) difference may affect compatibility with PCBs of specific thickness or with solder joint formation characteristics. PCB design specifications should be reviewed to confirm compatibility with the shorter post length of the TE Connectivity part.

Q: Are the mating contact specifications identical between these parts?

A: Yes. Both parts feature square-shaped contacts with 0.240" (6.10mm) mating length, gold plating on mating surfaces, and tin plating on posts. The mating pitch of 0.100" (2.54mm) and row spacing are identical.