HARTING 09185645913 Equivalent & Substitute Parts

Part Overview

The HARTING 09185645913 is a rectangular connector header, through-hole mounted in right-angle configuration with 64 positions at 0.100" (2.54mm) pitch. This connector is designed for board-to-cable/wire applications with shrouded 4-wall construction and solder termination. The part is currently active in production with 848 units in stock. Equivalent and substitute parts are identified based on matching core electrical and mechanical parameters to ensure functional interchangeability in applications requiring 64-position 2.54mm pitch rectangular connectors.

Substiute Parts

09185645913

HARTINGIn Stock: 91709185645913 Datasheet

Current PartRFQ

1-5499141-2

TE Connectivity AMP ConnectorsIn Stock: 10411-5499141-2 Datasheet

MFR RecommendedRFQ

71922-164LF

Amphenol ICC (FCI)In Stock: 158671922-164LF Datasheet

MFR RecommendedRFQ

N3764-5302RB

3MIn Stock: 1360N3764-5302RB Datasheet

MFR RecommendedRFQ

N3764-5303RB

3MIn Stock: 1312N3764-5303RB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09185645913 are qualified based on the following core parameters that determine functional interchangeability:

• Connector Configuration: Header type, male pin contact, 64 positions, 2 rows
• Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
• Mounting and Orientation: Through-hole, right-angle mounting
• Shrouding: 4-wall shrouded construction
• Termination Method: Solder termination
• Contact Finish: Gold mating surface
• Compliance: UL94 V-0 flammability rating, RoHS compliance, MSL 1

All substitute parts listed maintain these core parameters. Variations in contact material, insulation material, fastening hook length, and specific contact dimensions are secondary parameters that do not prevent functional substitution in standard applications.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and meet the core electrical and mechanical requirements for 64-position 2.54mm pitch rectangular connectors. Selection among substitutes should be based on the following factors:

Compliance and Regulatory: All substitute parts are RoHS compliant and carry UL94 V-0 flammability ratings. The HARTING 09185645913 and TE Connectivity 1-5499141-2 are REACH Unaffected, while Amphenol ICC 71922-164LF is REACH Affected. The 3M parts (N3764-5302RB and N3764-5303RB) are REACH Unaffected. For applications subject to REACH restrictions, select from HARTING, TE Connectivity, or 3M options.

Temperature Operating Range: The HARTING 09185645913 operates from -55°C to 125°C, providing the widest temperature range. TE Connectivity 1-5499141-2 operates from -65°C to 105°C. Amphenol ICC 71922-164LF does not specify an operating temperature range. The 3M parts operate from -55°C to 105°C. For applications requiring operation above 105°C, the HARTING part is the only option.

Packaging and Availability: Packaging formats vary across substitutes (Bulk, Tray, Tube). All parts are in stock with inventory levels ranging from 848 to 1489 units. Packaging selection should align with procurement and assembly requirements.

Contact Material and Fastening: The HARTING part uses Copper Alloy contacts with short fastening hooks. TE Connectivity uses Brass contacts with long hooks. Amphenol ICC uses Phosphor Bronze contacts. The 3M parts use Copper Alloy contacts with long hooks. These variations do not affect functional interchangeability in standard applications.

Frequently Asked Questions (FAQ)

Q: Can I substitute the HARTING 09185645913 with any of the listed parts?

A: Yes. All listed parts are functionally equivalent based on core parameters: 64-position, 2-row, 2.54mm pitch, through-hole right-angle header with 4-wall shrouding, solder termination, and gold mating contact finish. Substitution is valid for applications requiring these specifications.

Q: What are the key differences between the substitute parts?

A: The primary differences are contact material (Copper Alloy, Brass, or Phosphor Bronze), fastening hook length (short or long), insulation material composition, and operating temperature range. The HARTING part supports the highest upper temperature limit (-55°C to 125°C). Contact material and hook length variations do not affect electrical performance in standard applications.

Q: Does REACH compliance affect my selection?

A: REACH compliance depends on your application location and regulatory requirements. The HARTING 09185645913, TE Connectivity 1-5499141-2, and both 3M parts are REACH Unaffected. The Amphenol ICC 71922-164LF is REACH Affected. If REACH compliance is a requirement, avoid the Amphenol ICC part.

Q: What packaging options are available?

A: The HARTING part is supplied in Bulk packaging. TE Connectivity is supplied in Tray. Amphenol ICC is supplied in Tube. The 3M parts are supplied in Bulk. Packaging selection should align with your assembly process and procurement workflow.

Q: Are all parts RoHS compliant?

A: Yes. All listed parts, including the HARTING 09185645913, are RoHS compliant and carry UL94 V-0 flammability ratings, meeting standard environmental and safety requirements.

Q: Which part should I choose if my application requires operation above 105°C?

A: The HARTING 09185645913 is the only part in this list that supports operation up to 125°C. All other substitutes are rated to 105°C maximum (or unspecified in the case of Amphenol ICC).

Q: Are there any compatibility issues with PCB mounting?

A: No. All parts use identical 0.100" (2.54mm) pitch and row spacing with through-hole right-angle mounting. PCB footprints are compatible across all listed parts.