HARTING 09185607913 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The HARTING 09185607913 is an active-status rectangular connector header designed for through-hole, right-angle board-to-cable/wire applications. This 60-position, 2-row shrouded header with 0.100" (2.54mm) pitch and solder termination serves as a standard interconnect component in electronic assemblies. Substitute parts are identified to address inventory availability, lead time requirements, or specific application constraints while maintaining electrical and mechanical compatibility within the defined parameter envelope.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	60
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Shape	Square
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09185607913 is determined by strict equivalence across the following critical parameters:

Connector Type & Contact Configuration: Header with male pins
Position Count & Row Configuration: 60 positions in 2 rows
Pitch Specification: 0.100" (2.54mm) mating pitch and row spacing
Mounting & Orientation: Through-hole, right-angle mounting
Shrouding Design: Shrouded with 4-wall construction
Termination Method: Solder termination
Contact Geometry: Square contact shape
Regulatory Compliance: UL94 V-0 flammability rating and RoHS3 compliance

All three substitute parts (TE Connectivity 1-5499141-1, TE Connectivity 3-5102322-1, and 3M N3372-5302RB) meet these core substitution criteria. Variations in secondary parameters such as contact post length, insulation height, contact material composition, and operating temperature range do not preclude substitution when the primary mechanical and electrical interface parameters remain equivalent.

Parameter Comparison

Parameter	HARTING 09185607913	TE Connectivity 1-5499141-1	TE Connectivity 3-5102322-1	3M N3372-5302RB
Manufacturer	HARTING	TE Connectivity AMP Connectors	TE Connectivity AMP Connectors	3M
Series	SEK	AMP-Latch	AMP-Latch	3000
Connector Type	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	60	60	60	60
Number of Rows	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder
Contact Shape	Square	Square	Square	Square
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)
Contact Length - Post	0.114" (2.90mm)	0.110" (2.79mm)	0.155" (3.94mm)	0.112" (2.84mm)
Insulation Height	0.335" (8.51mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.340" (8.64mm)
Contact Finish - Mating	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold
Contact Finish - Post	Tin	Tin	Tin	Tin
Contact Material	Copper Alloy	Brass	Brass	Copper Alloy
Operating Temperature	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-55°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active

Engineering Selection Recommendations

All three substitute parts maintain active product status and satisfy the core substitution criteria defined by connector type, position count, pitch, mounting configuration, and shrouding design. Selection among these equivalents should be based on:

TE Connectivity 1-5499141-1: Offers the closest contact post length (0.110" vs. 0.114") and maintains the same mating contact length. Provides 1A per contact current rating and 250VAC voltage rating. Suitable for applications requiring standard electrical performance specifications.

TE Connectivity 3-5102322-1: Features extended contact post length (0.155") and identical electrical ratings (1A per contact, 250VAC). The longer post accommodates applications with thicker PCB assemblies or specific board-to-cable routing requirements. Insulation color differs (blue vs. gray).

3M N3372-5302RB: Delivers the highest current rating (1.75A per contact) among the substitutes and maintains copper alloy contact material matching the original HARTING design. Operating temperature range (-55°C ~ 105°C) aligns with the original specification's lower bound. Suitable for higher-current applications within the defined temperature envelope.

All substitute parts carry UL94 V-0 flammability certification and RoHS compliance, meeting regulatory requirements equivalent to the original component.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity 1-5499141-1 be used as a direct replacement for HARTING 09185607913?

A: Yes. Both connectors share identical pitch (0.100"), position count (60 in 2 rows), mounting type (through-hole right-angle), shrouding design (4-wall), and termination method (solder). Contact post length variation (0.110" vs. 0.114") does not affect mechanical fit or electrical interface compatibility.

Q: What is the significance of the different contact post lengths among the substitute parts?

A: Contact post length determines the effective solder joint depth on the PCB. The HARTING original specifies 0.114" (2.90mm). TE Connectivity 1-5499141-1 (0.110") and 3M N3372-5302RB (0.112") provide equivalent solder engagement. TE Connectivity 3-5102322-1 (0.155") offers extended post length for applications requiring deeper PCB penetration or accommodating thicker board assemblies.

Q: Are there electrical performance differences between the substitute parts?

A: TE Connectivity parts specify 1A per contact and 250VAC rating. 3M N3372-5302RB specifies 1.75A per contact, providing higher current capacity. The original HARTING part does not specify current or voltage ratings in the provided data. Selection should align with application current requirements.

Q: Do operating temperature ranges affect substitution eligibility?

A: Operating temperature range is a secondary parameter that does not preclude substitution. The HARTING original operates -55°C ~ 125°C. TE Connectivity substitutes operate -65°C ~ 105°C (narrower upper limit). 3M N3372-5302RB operates -55°C ~ 105°C. Applications requiring operation above 105°C should retain the original HARTING component.

Q: What packaging differences exist among these parts?

A: HARTING 09185607913 and 3M N3372-5302RB are supplied in bulk packaging. TE Connectivity 1-5499141-1 and 3-5102322-1 are supplied in tray packaging. Packaging format does not affect connector functionality or compatibility.

Q: Are all substitute parts RoHS compliant?

A: Yes. HARTING 09185607913, TE Connectivity 1-5499141-1, and TE Connectivity 3-5102322-1 are ROHS3 compliant. 3M N3372-5302RB is RoHS compliant. All parts meet regulatory requirements for hazardous substance restriction.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message