HARTING 09185606913 Equivalent & Substitute Parts

Part Overview

The HARTING 09185606913 is an active rectangular connector header designed for through-hole, right-angle board-to-cable/wire applications. This 60-position, 2-row connector operates across -55°C to 125°C and meets UL94 V-0 flammability standards with ROHS3 compliance. Equivalent parts are necessary to address supply chain variations, packaging preferences, and specific mechanical or electrical requirements across different manufacturing environments.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	60
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Shape	Square
Operating Temperature Range	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09185606913 is determined by strict alignment with the following core parameters:

Connector Type & Contact Configuration: Header with male pins
Position Count & Row Configuration: 60 positions in 2 rows
Pitch Specifications: 0.100" (2.54mm) mating pitch and row spacing
Mounting & Orientation: Through-hole, right-angle mounting
Shrouding Design: Shrouded 4-wall construction
Termination Method: Solder termination
Contact Geometry: Square contact shape
Compliance Standards: UL94 V-0 flammability, ROHS3 compliance, MSL 1

All four substitute parts (TE Connectivity 1-5499141-1, TE Connectivity 3-5102322-1, 3M D3372-5302-AR, and 3M N3372-5302RB) meet these core substitution criteria. Variations in contact post length, insulation height, contact finish thickness, and operating temperature upper limits do not prevent functional equivalence within standard application parameters.

Parameter Comparison

Parameter	HARTING 09185606913	TE 1-5499141-1	TE 3-5102322-1	3M D3372-5302-AR	3M N3372-5302RB
Manufacturer	HARTING	TE Connectivity AMP	TE Connectivity AMP	3M	3M
Series	SEK	AMP-Latch	AMP-Latch	D3000	3000
Connector Type	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	60	60	60	60	60
Number of Rows	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder
Contact Shape	Square	Square	Square	Square	Square
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)
Contact Length - Post	0.114" (2.90mm)	0.110" (2.79mm)	0.155" (3.94mm)	0.112" (2.84mm)	0.112" (2.84mm)
Insulation Height	0.335" (8.51mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.340" (8.64mm)	0.340" (8.64mm)
Contact Finish - Mating	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold	Gold
Contact Finish - Post	Tin	Tin	Tin	Tin	Tin
Contact Material	Copper Alloy	Brass	Brass	Brass	Copper Alloy
Operating Temperature Range	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging	Bulk	Tray	Tray	Tray	Bulk
Current Rating	Not specified	1A per Contact	1A per Contact	1.75A	1.75A

Engineering Selection Recommendations

All four substitute parts maintain active product status and full ROHS3 compliance with MSL 1 rating, ensuring compatibility with modern manufacturing and environmental standards.

TE Connectivity 1-5499141-1 and TE Connectivity 3-5102322-1 are both AMP-Latch series connectors with identical core specifications. Selection between these two depends on contact post length requirements: 1-5499141-1 provides 0.110" (2.79mm) post length, while 3-5102322-1 extends to 0.155" (3.94mm). Both are available in tray packaging and support 1A per contact current rating.

3M D3372-5302-AR (D3000 series, tray packaging) and 3M N3372-5302RB (3000 series, bulk packaging) both deliver 1.75A per contact current rating and operate across -55°C to 105°C. The 3M options provide higher current capacity than TE alternatives. N3372-5302RB matches the bulk packaging of the original HARTING part.

Operating temperature upper limit differences (HARTING 125°C versus TE/3M 105°C) are not substitution barriers for applications within the 105°C ceiling. Contact post length variations (0.110" to 0.155") require PCB layout verification to ensure proper solder joint formation and mechanical clearance.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity 1-5499141-1 directly replace HARTING 09185606913 on existing PCBs?

A: Direct replacement is possible if PCB pad spacing and solder joint depth accommodate the 0.110" (2.79mm) contact post length. The 0.004" (0.10mm) difference from the original 0.114" (2.90mm) post is within typical PCB manufacturing tolerances. Verify solder fillet formation during assembly trials.

Q: What is the difference between TE 1-5499141-1 and TE 3-5102322-1?

A: Both are AMP-Latch series with identical electrical and mechanical specifications except contact post length. 1-5499141-1 has 0.110" (2.79mm) posts; 3-5102322-1 has 0.155" (3.94mm) posts. Selection depends on PCB hole depth and solder joint requirements. 3-5102322-1 provides deeper engagement for applications requiring maximum mechanical retention.

Q: Why do 3M parts offer higher current ratings (1.75A) than TE parts (1A)?

A: Current rating differences reflect contact material and design specifications. 3M D3372-5302-AR and N3372-5302RB are rated for 1.75A per contact, while TE AMP-Latch series are rated for 1A per contact. Applications requiring current levels between 1A and 1.75A must use 3M equivalents.

Q: Does packaging (bulk vs. tray) affect electrical performance?

A: No. Bulk and tray packaging are logistics and handling formats only. HARTING 09185606913 (bulk) and 3M N3372-5302RB (bulk) are functionally equivalent to tray-packaged alternatives. Packaging selection depends on assembly line automation and inventory management requirements.

Q: Are all substitutes compatible with the same mating connectors?

A: Yes. All substitute parts maintain 0.100" (2.54mm) pitch, 60-position, 2-row configuration with square male pin contacts and shrouded 4-wall design. Mating connectors designed for HARTING 09185606913 are compatible with all listed substitutes.

Q: What is the impact of operating temperature range differences?

A: HARTING 09185606913 operates to 125°C; TE and 3M substitutes operate to 105°C. For applications within 105°C, all parts are equivalent. Applications requiring operation above 105°C must retain the original HARTING part.

Q: Can contact material differences (Copper Alloy vs. Brass) affect performance?

A: Both copper alloy and brass contacts meet UL94 V-0 and ROHS3 standards. Material differences do not affect electrical performance, mating compatibility, or reliability within specified operating parameters. Selection is based on application-specific corrosion resistance or cost considerations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message