HARTING 09185505913 Equivalent & Substitute Parts

Part Overview

The HARTING 09185505913 is a rectangular connector header, right-angle configuration, with 50 positions at 2.54mm pitch. This through-hole, shrouded male pin connector is designed for board-to-cable/wire applications with solder termination and latch lock/eject hook fastening. The part is active in production status with 692 units in current inventory. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific requirements where mechanical or electrical parameter variations are acceptable within the allowed specification range.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	50
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Shape	Square
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following critical parameters:

Mandatory Matching Parameters:

Connector Type: Header
Contact Type: Male Pin
Number of Positions: 50
Number of Rows: 2
Pitch - Mating: 0.100" (2.54mm)
Row Spacing - Mating: 0.100" (2.54mm)
Mounting Type: Through Hole, Right Angle
Shrouding: Shrouded - 4 Wall
Termination: Solder
Contact Shape: Square
Material Flammability Rating: UL94 V-0

Allowed Variation Parameters:

Fastening Type: Latch Lock/Eject Hooks (Long or Short variants acceptable)
Contact Length - Mating: 0.228" to 0.240" (5.80mm to 6.10mm)
Contact Length - Post: 0.110" to 0.155" (2.79mm to 3.94mm)
Insulation Height: 0.315" to 0.340" (8.00mm to 8.64mm)
Contact Finish - Mating: Gold or Gold-Palladium
Contact Finish Thickness - Mating: 10.0µin to 30.0µin (0.25µm to 0.76µm)
Contact Material: Copper Alloy, Brass, or Phosphor Bronze
Insulation Material: PBT Glass Filled, PCT Polyester Glass Filled, or Thermoplastic Glass Filled
Insulation Color: Gray or Black
Operating Temperature: -65°C to -55°C minimum; 105°C to 125°C maximum
RoHS Status: ROHS3 Compliant or RoHS Compliant
REACH Status: REACH Unaffected or Vendor Undefined

All seven substitute parts meet these criteria and are direct functional equivalents for the HARTING 09185505913.

Parameter Comparison

Parameter	HARTING 09185505913	TE 1-5499141-0	TE 1-5499345-0	TE 1-5499786-0	Amphenol 71922-150LF	3M D3433-5302-AR	3M N3433-5202RB	3M N3433-5302RB	3M N3433-5303RB
Manufacturer	HARTING	TE Connectivity AMP	TE Connectivity AMP	TE Connectivity AMP	Amphenol ICC (FCI)	3M	3M	3M	3M
Series	SEK	AMP-Latch	AMP-Latch	AMP-Latch	Quickie™	D3000	3000	3000	3000
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	50	50	50	50	50	50	50	50	50
Number of Rows	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Long	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Long	Latch Lock/Eject Hooks	Latch Lock/Eject Hooks, Long	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Long	Latch Lock/Eject Hooks, Long
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.228" (5.80mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)
Contact Length - Post	0.114" (2.90mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.114" (2.90mm)	0.112" (2.84mm)	0.112" (2.84mm)	0.112" (2.84mm)	0.155" (3.94mm)
Insulation Height	0.335" (8.51mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.339" (8.61mm)	0.340" (8.64mm)	0.340" (8.64mm)	0.340" (8.64mm)	0.340" (8.64mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold, GXT™	Gold	Gold	Gold	Gold
Contact Finish Thickness - Mating	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	15.0µin (0.38µm)	30.0µin (0.76µm)	10.0µin (0.25µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)
Contact Finish - Post	Tin	Tin	Tin	Tin	Tin	Tin	Tin	Tin	Tin
Contact Material	Copper Alloy	Brass	Brass	Brass	Phosphor Bronze	Brass	Copper Alloy	Copper Alloy	Copper Alloy
Insulation Material	Polybutylene Terephthalate (PBT), Glass Filled	Not Specified	Not Specified	Not Specified	Thermoplastic, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled	Polycyclohexylenedimethylene Terephthalate (PCT), Polyester, Glass Filled
Insulation Color	Gray	Black	Black	Black	Gray	Black	Black	Black	Black
Operating Temperature	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	Not Specified	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	Vendor Undefined	REACH Unaffected	REACH Unaffected	REACH Unaffected	Not Specified	REACH Unaffected	REACH Unaffected	REACH Unaffected
Packaging	Bulk	Tray	Tray	Bulk	Tube	Tray	Bulk	Bulk	Bulk
Inventory Status	692 Pcs	1071 Pcs	945 Pcs	2008 Pcs	1079 Pcs	1164 Pcs	1312 Pcs	1655 Pcs	1290 Pcs

Engineering Selection Recommendations

All substitute parts listed are active in production status and meet the mandatory electrical and mechanical specifications for direct functional equivalence with the HARTING 09185505913.

TE Connectivity AMP-Latch Series (1-5499141-0, 1-5499345-0, 1-5499786-0): These parts are ROHS3 compliant and provide electrical ratings of 1A per contact at 250VAC. The 1-5499786-0 offers the highest inventory availability at 2008 units in bulk packaging. Fastening type variations (long vs. short hooks) are available to accommodate different mechanical requirements. Operating temperature range is -65°C to 105°C.

Amphenol ICC Quickie™ Series (71922-150LF): This part features phosphor bronze contact material and GXT™ gold finish technology. It is RoHS compliant and available in tube packaging with 1079 units in inventory. Contact length specifications match the original part at 0.114" (2.90mm) post length.

3M D3000 and 3000 Series (D3433-5302-AR, N3433-5202RB, N3433-5302RB, N3433-5303RB): These parts are available in bulk packaging with high inventory levels ranging from 1164 to 1655 units. All are RoHS compliant or ROHS3 compliant. The 3M parts provide current ratings of 1.75A and support operating temperatures from -55°C to 105°C. Contact post length variations are available: standard 0.112" (2.84mm) or extended 0.155" (3.94mm) for N3433-5303RB, accommodating different PCB thickness requirements.

Selection should prioritize inventory availability, packaging format requirements, and specific mechanical variations needed for the application. All parts maintain UL94 V-0 flammability rating and MSL 1 moisture sensitivity classification.

Frequently Asked Questions (FAQ)

Q: What are the critical parameters that determine if a part is a direct substitute for the HARTING 09185505913?

A: The following parameters must match exactly: 50-position, 2-row header configuration at 0.100" (2.54mm) pitch; male pin contact type; through-hole right-angle mounting; shrouded 4-wall design; solder termination; square contact shape; and UL94 V-0 flammability rating. All listed substitute parts meet these requirements.

Q: Can I use a substitute part with a different fastening hook length (long vs. short)?

A: Yes. Both long and short latch lock/eject hook variants are acceptable substitutes. The hook length variation does not affect electrical performance or mating compatibility. Selection depends on mechanical clearance and engagement force requirements in your specific application.

Q: What is the significance of contact post length variations among the substitute parts?

A: Contact post length determines the solder joint depth and is critical for PCB assembly. The HARTING original specifies 0.114" (2.90mm). Substitute parts range from 0.110" to 0.155" (2.79mm to 3.94mm). Shorter posts (TE parts at 0.110") may require PCB design adjustment. The 3M N3433-5303RB offers extended 0.155" posts for thicker PCB applications. Verify PCB thickness compatibility before selection.

Q: Are there differences in contact material between the original and substitutes?

A: Yes. The HARTING original uses copper alloy; TE Connectivity parts use brass; Amphenol uses phosphor bronze; 3M parts use either brass or copper alloy. All materials are acceptable for the specified application. Contact material differences do not affect mating compatibility but may influence corrosion resistance in specific environmental conditions.

Q: What is the difference between ROHS3 Compliant and RoHS Compliant status?

A: ROHS3 refers to compliance with the third iteration of the Restriction of Hazardous Substances directive, which includes additional restricted substances. RoHS Compliant indicates compliance with earlier versions. Both statuses are acceptable for most applications. Verify your specific regulatory requirements before final selection.

Q: Can I mix substitute parts from different manufacturers in the same assembly?

A: Yes. All substitute parts are mechanically and electrically compatible with each other due to matching pitch, position count, and contact specifications. However, for consistency in manufacturing and quality control, it is recommended to standardize on a single part number per assembly where possible.

Q: What packaging options are available?

A: Substitute parts are available in three packaging formats: Bulk (loose parts), Tray (organized trays), and Tube (rolled packaging). Selection depends on your assembly process requirements and handling procedures. Bulk packaging typically offers the highest inventory availability.

Q: How do operating temperature ranges compare?

A: The HARTING original operates from -55°C to 125°C. Most TE and 3M substitutes operate from -55°C to 105°C, with TE parts extending to -65°C minimum. If your application requires operation above 105°C, the HARTING original is the only listed option. For standard industrial applications (-55°C to 105°C), all substitutes are suitable.

Q: Are there electrical rating differences I should consider?

A: The HARTING original does not specify current or voltage ratings. TE Connectivity parts are rated at 1A per contact at 250VAC. 3M parts are rated at 1.75A. Amphenol does not specify ratings. If your application requires specific electrical ratings, TE and 3M parts provide documented performance specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message