HARTING 09185405913 Equivalent & Substitute Parts

Part Overview

The HARTING 09185405913 is a rectangular connector header, right-angle mounted, with 40 positions at 2.54mm pitch. This through-hole component features shrouded 4-wall construction with solder termination and latch lock/eject hooks. The part is actively produced and widely used in board-to-cable/wire interconnect applications requiring reliable mechanical and electrical connections.

Substitute parts are necessary when the primary part experiences supply constraints, extended lead times, or when design requirements permit alternative contact materials, insulation heights, or fastening mechanisms that maintain functional compatibility.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	40
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Shape	Square
Contact Finish - Mating	Gold
Contact Material	Copper Alloy
Insulation Material	Polybutylene Terephthalate (PBT), Glass Filled
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following core parameters:

Critical Parameters (Must Match):

Connector Type: Header
Contact Type: Male Pin
Pitch - Mating: 0.100" (2.54mm)
Number of Positions: 40
Number of Rows: 2
Row Spacing - Mating: 0.100" (2.54mm)
Mounting Type: Through Hole, Right Angle
Shrouding: Shrouded - 4 Wall
Termination: Solder
Contact Shape: Square
Style: Board to Cable/Wire

Allowable Variations (Do Not Prevent Substitution):

Contact Material: Copper Alloy, Brass, or Phosphor Bronze
Contact Finish - Mating: Gold, Gold-Palladium, or Gold GXT™
Contact Finish Thickness - Mating: 15.0µin to 30.0µin
Contact Length - Post: 0.110" to 0.155" (2.79mm to 3.94mm)
Insulation Height: 0.315" to 0.339" (8.00mm to 8.61mm)
Fastening Type: Latch Lock/Eject Hooks (Short or Long)
Operating Temperature Range: -65°C to -55°C minimum; 105°C to 125°C maximum
Insulation Material: PBT Glass Filled, Thermoplastic Glass Filled, or PCT Polyester Glass Filled
Insulation Color: Gray or Black
RoHS Status: RoHS Compliant or ROHS3 Compliant
Packaging: Bulk or Tray

All substitute parts listed maintain UL94 V-0 flammability rating and MSL 1 classification.

Parameter Comparison

Part Number	Manufacturer	Series	Contact Material	Contact Finish - Mating	Contact Length - Post	Insulation Height	Fastening Type	Operating Temp	RoHS Status	Packaging	Inventory
09185405913	HARTING	SEK	Copper Alloy	Gold	0.114" (2.90mm)	0.335" (8.51mm)	Latch Lock/Eject Hooks, Short	-55°C ~ 125°C	ROHS3 Compliant	Bulk	950 Pcs
5499141-9	TE Connectivity AMP Connectors	AMP-Latch	Brass	Gold or Gold-Palladium	0.110" (2.79mm)	0.315" (8.00mm)	Latch Lock/Eject Hooks, Long	-65°C ~ 105°C	RoHS Compliant	Tray	500100 Pcs
5499345-9	TE Connectivity AMP Connectors	AMP-Latch	Brass	Gold or Gold-Palladium	0.110" (2.79mm)	0.315" (8.00mm)	Latch Lock/Eject Hooks, Short	-65°C ~ 105°C	RoHS Compliant	Tray	5776 Pcs
5499376-9	TE Connectivity AMP Connectors	AMP-Latch	Brass	Gold or Gold-Palladium	0.155" (3.94mm)	0.315" (8.00mm)	Latch Lock/Eject Hooks, Short	-65°C ~ 105°C	ROHS3 Compliant	Bulk	985 Pcs
5499786-9	TE Connectivity AMP Connectors	AMP-Latch	Brass	Gold or Gold-Palladium	0.110" (2.79mm)	0.315" (8.00mm)	Latch Lock/Eject Hooks, Long	-65°C ~ 105°C	ROHS3 Compliant	Bulk	1480 Pcs
5499913-9	TE Connectivity AMP Connectors	AMP-Latch	Brass	Gold or Gold-Palladium	0.110" (2.79mm)	0.315" (8.00mm)	Latch Lock/Eject Hooks, Short	-65°C ~ 105°C	RoHS Compliant	Bulk	3250 Pcs
71922-140LF	Amphenol ICC (FCI)	Quickie™	Phosphor Bronze	Gold, GXT™	0.114" (2.90mm)	0.339" (8.61mm)	Latch Lock/Eject Hooks	Not Specified	RoHS Compliant	Tube	1442 Pcs
71922-240LF	Amphenol ICC (FCI)	Quickie™	Phosphor Bronze	Gold, GXT™	0.114" (2.90mm)	0.339" (8.61mm)	Latch Lock/Eject Hooks, Short	Not Specified	RoHS Compliant	Tube	1232 Pcs
N3432-5202RB	3M	3000	Copper Alloy	Gold	0.112" (2.84mm)	0.340" (8.64mm)	Latch Lock/Eject Hooks, Short	-55°C ~ 105°C	RoHS Compliant	Bulk	935 Pcs
N3432-5203RB	3M	3000	Copper Alloy	Gold	0.155" (3.94mm)	0.340" (8.64mm)	Latch Lock/Eject Hooks, Short	-55°C ~ 105°C	RoHS Compliant	Bulk	1209 Pcs
N3432-5302RB	3M	3000	Copper Alloy	Gold	0.112" (2.84mm)	0.340" (8.64mm)	Latch Lock/Eject Hooks, Long	-55°C ~ 105°C	RoHS Compliant	Bulk	2658 Pcs

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

N3432-5202RB and N3432-5302RB (3M 3000 Series) are the closest functional equivalents to the HARTING 09185405913. Both maintain identical contact material (Copper Alloy), mating finish (Gold), and operating temperature range (-55°C ~ 105°C). The primary difference is fastening type: N3432-5202RB uses short hooks while N3432-5302RB uses long hooks. Both are RoHS Compliant and available in bulk packaging.

Secondary Substitutes (TE Connectivity AMP-Latch Series):

The TE Connectivity 5499-series parts (5499141-9, 5499345-9, 5499376-9, 5499786-9, 5499913-9) are functionally compatible but employ brass contact material instead of copper alloy. These parts feature a reduced operating temperature maximum of 105°C versus the HARTING part's 125°C. TE Connectivity parts are available in higher inventory quantities and offer ROHS3 compliance options (5499376-9, 5499786-9). Fastening type and contact post length vary within this series.

Alternative Substitutes (Amphenol ICC Quickie™ Series):

The 71922-140LF and 71922-240LF (Amphenol ICC) employ phosphor bronze contacts with GXT™ gold finish. Operating temperature range is not specified for these parts. Both are RoHS Compliant and available in tube packaging. The primary distinction is fastening type: 71922-140LF uses standard latch hooks while 71922-240LF uses short hooks.

Compliance Considerations:

All substitute parts maintain UL94 V-0 flammability rating and MSL 1 classification. ROHS3 compliance is available in 5499376-9 and 5499786-9 (TE Connectivity). All other parts are RoHS Compliant. REACH status varies; consult specific part documentation for regulatory requirements in target markets.

Frequently Asked Questions (FAQ)

Q: Can I substitute the HARTING 09185405913 with any of the listed parts?

A: Yes, all listed parts are functionally compatible substitutes. They share identical connector type, contact type, pitch, position count, row configuration, mounting style, shrouding, and termination method. Variations in contact material, finish thickness, post length, and fastening mechanism do not prevent substitution in standard applications.

Q: What is the difference between short and long fastening hooks?

A: Fastening type refers to the latch mechanism design. Short hooks provide a more compact engagement profile, while long hooks offer extended mechanical engagement. Selection depends on mating connector design and application space constraints. Both types maintain equivalent electrical and mechanical reliability.

Q: Why do some parts specify operating temperature ranges while others do not?

A: Operating temperature specifications are provided by manufacturers based on validated testing and design parameters. The HARTING part specifies -55°C ~ 125°C, while TE Connectivity and 3M parts specify -65°C ~ 105°C. Amphenol ICC parts do not provide temperature specifications in the available data. For applications requiring specific temperature performance, consult manufacturer datasheets.

Q: What is the significance of contact material differences (Copper Alloy vs. Brass vs. Phosphor Bronze)?

A: Contact material affects electrical conductivity, mechanical durability, and cost. Copper Alloy and Brass provide excellent electrical properties and are widely used in standard applications. Phosphor Bronze offers enhanced mechanical strength and fatigue resistance. All three materials are suitable for 2.54mm pitch rectangular connectors in typical board-to-cable interconnect applications.

Q: Does packaging type (Bulk, Tray, Tube) affect electrical or mechanical performance?

A: No. Packaging type is a logistics consideration only and does not affect connector performance. Bulk packaging is suitable for high-volume assembly operations. Tray packaging provides organized component presentation. Tube packaging is common for smaller quantities. Selection depends on assembly process requirements and inventory management practices.

Q: Are there any restrictions on mixing substitute parts in the same assembly?

A: All listed parts are mechanically and electrically compatible with each other. However, design consistency and supply chain management typically favor using a single part number per assembly. If multiple part numbers are used, ensure that mating connectors are compatible with all contact post lengths and insulation heights specified in the substitute parts.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: RoHS Compliant indicates compliance with the original Restriction of Hazardous Substances Directive. ROHS3 Compliant indicates compliance with the updated RoHS 3 Directive (2011/65/EU as amended by 2015/863/EU), which includes additional restricted substances. ROHS3 Compliant parts meet more stringent regulatory requirements and are preferred for new designs targeting European markets.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message