HARTING 09185345913 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The HARTING 09185345913 is a through-hole, right-angle rectangular connector header with 34 positions at 2.54mm pitch, designed for board-to-cable/wire applications. This shrouded, 4-wall header features male pins with gold-plated mating contacts and tin-plated solder posts, operating across -55°C to 125°C. The part is active and ROHS3 compliant with UL94 V-0 flammability rating.

Equivalent and substitute parts are identified based on matching core electrical and mechanical parameters: 34-position configuration, 2.54mm pitch, through-hole right-angle mounting, shrouded 4-wall design, male pin contact type, and solder termination. Substitutes may vary in fastening hook length, contact material composition, insulation material, and operating temperature range within acceptable tolerances.

Substiute Parts

09185345913

HARTINGIn Stock: 104009185345913 Datasheet

Current PartRFQ

499141-8

TE Connectivity AMP ConnectorsIn Stock: 1013499141-8 Datasheet

MFR RecommendedRFQ

5102322-8

TE Connectivity AMP ConnectorsIn Stock: 13715102322-8 Datasheet

MFR RecommendedRFQ

5499141-8

TE Connectivity AMP ConnectorsIn Stock: 18145499141-8 Datasheet

MFR RecommendedRFQ

5499786-8

TE Connectivity AMP ConnectorsIn Stock: 19945499786-8 Datasheet

MFR RecommendedRFQ

5499913-8

TE Connectivity AMP ConnectorsIn Stock: 16445499913-8 Datasheet

MFR RecommendedRFQ

D3431-5202-AR

3MIn Stock: 1324D3431-5202-AR Datasheet

MFR RecommendedRFQ

D3431-5302-AR

3MIn Stock: 1653D3431-5302-AR Datasheet

MFR RecommendedRFQ

N3431-5202RB

3MIn Stock: 2255N3431-5202RB Datasheet

MFR RecommendedRFQ

N3431-5302RB

3MIn Stock: 10566N3431-5302RB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following core parameters:

Critical Parameters (Must Match):

• 34 positions, 2 rows
• 0.100" (2.54mm) mating pitch and row spacing
• Through-hole, right-angle mounting
• Shrouded 4-wall design
• Male pin contact type
• Solder termination
• Board-to-cable/wire or board-to-board style compatibility

Allowable Variation Parameters:

• Fastening type: Short or long latch lock/eject hooks
• Contact material: Copper alloy or brass
• Contact finish composition: Gold, gold-palladium, or variations in plating thickness
• Insulation material: PBT glass-filled or PCT polyester glass-filled
• Operating temperature range: -55°C to 125°C or -65°C to 105°C
• Current and voltage ratings: Specified where provided
• Packaging: Bulk or tray

All substitute parts listed meet these criteria and are functionally interchangeable within the specified parameter tolerances.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

N3431-5302RB and N3431-5202RB (3M 3000 series) are the closest functional equivalents to the HARTING 09185345913. Both maintain copper alloy contact material, gold mating finish, and operating temperature range of -55°C to 105°C. Both are ROHS3 compliant with UL94 V-0 rating. The primary difference is fastening type: N3431-5302RB features long hooks while N3431-5202RB features short hooks, matching the original part's short-hook design.

D3431-5202-AR and D3431-5302-AR (3M D3000 series) are functionally equivalent with brass contact material and gold mating finish. Operating temperature range is -55°C to 105°C. Both are ROHS3 compliant. D3431-5202-AR matches the short-hook fastening of the original part.

Secondary Substitutes (Acceptable with Design Review):

TE Connectivity AMP-Latch series (499141-8, 5102322-8, 5499141-8, 5499786-8, 5499913-8) are mechanically and electrically compatible. All feature 34-position, 2.54mm pitch configuration with shrouded 4-wall design. Operating temperature range is -65°C to 105°C, which is narrower than the original part's -55°C to 125°C specification. Contact material is brass with gold or gold-palladium finish. RoHS compliance varies: 5102322-8, 5499141-8, 5499786-8, and 5499913-8 are ROHS3 compliant; 499141-8 is non-compliant. For applications requiring the full -55°C to 125°C operating range, TE Connectivity parts are not suitable.

Compliance Considerations:

All recommended substitutes maintain UL94 V-0 flammability rating and MSL 1 (unlimited) moisture sensitivity level. ROHS3 compliance is confirmed for 3M parts and most TE Connectivity variants. Applications requiring ROHS3 compliance should exclude 499141-8 (TE Connectivity, non-compliant).

Frequently Asked Questions (FAQ)

Q: Can I substitute the HARTING 09185345913 with a TE Connectivity AMP-Latch part?

A: TE Connectivity AMP-Latch parts (499141-8, 5102322-8, 5499141-8, 5499786-8, 5499913-8) are mechanically and electrically compatible for the 34-position, 2.54mm pitch header configuration. However, the operating temperature range is -65°C to 105°C, which does not cover the original part's upper limit of 125°C. Substitution is acceptable only for applications operating within -65°C to 105°C. Additionally, 499141-8 is RoHS non-compliant; use ROHS3-compliant variants if compliance is required.

Q: What is the difference between short and long fastening hooks?

A: Fastening hook length affects mating force and connector retention. Short hooks (as in the original HARTING 09185345913) provide lower mating force, while long hooks provide higher retention force. Both are mechanically compatible with the 34-position, 2.54mm pitch configuration. Selection depends on application requirements for connector retention and ease of mating/unmating.

Q: Are 3M D3000 and 3000 series parts interchangeable?

A: Yes. Both 3M D3000 series (D3431-5202-AR, D3431-5302-AR) and 3M 3000 series (N3431-5202RB, N3431-5302RB) are functionally equivalent to the HARTING 09185345913. The primary differences are contact material composition and plating thickness. Both maintain 34 positions, 2.54mm pitch, through-hole right-angle mounting, and shrouded 4-wall design. Operating temperature range is -55°C to 105°C for both series.

Q: Does packaging (bulk vs. tray) affect electrical or mechanical performance?

A: No. Packaging format (bulk or tray) is a logistics consideration only and does not affect electrical or mechanical performance. Selection between bulk and tray packaging depends on inventory management and assembly process requirements.

Q: Which substitute part has the highest inventory availability?

A: N3431-5302RB (3M 3000 series, long hooks) has the highest inventory at 10,549 pieces. This part is ROHS3 compliant, maintains copper alloy contact material with gold finish, and operates across -55°C to 105°C, making it a primary equivalent to the HARTING 09185345913.

Q: Can I use these parts in applications requiring full -55°C to 125°C operation?

A: Only HARTING 09185345913, D3431-5202-AR, D3431-5302-AR, N3431-5202RB, and N3431-5302RB support the full -55°C to 125°C operating range. TE Connectivity AMP-Latch parts are limited to -65°C to 105°C and are not suitable for applications requiring operation above 105°C.