HARTING 09185306914 Equivalent & Substitute Parts

Part Overview

The HARTING 09185306914 is an active rectangular connector header designed for through-hole mounting applications. This shrouded 30-position connector with 2.54mm pitch serves board-to-cable/wire interconnection requirements in industrial and commercial electronics. The part features male pins with gold-plated mating contacts, tin-plated posts, and latch lock/eject hook fastening. Finding equivalent substitute parts is necessary to ensure supply chain flexibility, manage inventory across multiple manufacturers, and maintain design compatibility when the primary part becomes unavailable.

Substiute Parts

09185306914

HARTINGIn Stock: 96609185306914 Datasheet

Current PartRFQ

5499910-7

TE Connectivity AMP ConnectorsIn Stock: 25675499910-7 Datasheet

MFR RecommendedRFQ

D3440-6202-AR

3MIn Stock: 3036D3440-6202-AR Datasheet

MFR RecommendedRFQ

N3440-6202RB

3MIn Stock: 4685N3440-6202RB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09185306914 is determined by strict alignment of the following critical parameters:

Core Electrical & Mechanical Criteria:

• Connector type: Header
• Contact type: Male pin
• Number of positions: 30
• Number of rows: 2
• Pitch - mating: 0.100" (2.54mm)
• Row spacing - mating: 0.100" (2.54mm)
• Shrouding: Shrouded - 4 Wall
• Mounting type: Through hole
• Termination: Solder
• Fastening type: Latch lock/eject hooks, short
• Contact shape: Square
• Contact finish - mating: Gold
• Contact finish - post: Tin
• Material flammability rating: UL94 V-0
• RoHS status: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

All three substitute parts meet these core criteria. Variations in contact length, insulation height, operating temperature upper limit, and contact material do not preclude substitution when the primary part is unavailable, as these parameters remain within acceptable ranges for the intended application category.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are active products with ROHS3 compliance and UL94 V-0 flammability ratings, meeting the regulatory and safety requirements of the HARTING 09185306914.

TE Connectivity 5499910-7 is the manufacturer-recommended primary substitute. It maintains full electrical and mechanical compatibility with identical pitch, position count, shrouding, and fastening specifications. The AMP-Latch series provides 1A current rating and operates across the -55°C to 105°C range. Insulation height is notably lower at 0.549" (13.94mm) compared to the HARTING specification of 0.681" (17.30mm); this dimensional difference requires board layout verification before implementation.

3M D3440-6202-AR and 3M N3440-6202RB are functionally equivalent alternatives from the 3M connector portfolio. Both maintain the core 30-position, 2.54mm pitch configuration with identical shrouding and fastening. The D3000 and 3000 series connectors provide higher current ratings of 1.75A and operate to 105°C. Insulation height matches the HARTING specification at 0.680" (17.27mm), simplifying board layout compatibility. The D3440-6202-AR is packaged in trays, while the N3440-6202RB is supplied in bulk. Contact length variations across all substitutes remain within acceptable tolerances for standard through-hole solder termination.

Selection between these three substitutes depends on supply availability, packaging requirements, and thermal operating envelope constraints specific to the application.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 5499910-7 be used as a direct replacement for the HARTING 09185306914?

A: Yes, the TE Connectivity 5499910-7 meets all core electrical and mechanical substitution criteria. However, the insulation height is 0.132" (3.36mm) lower than the HARTING part. Board layout and clearance requirements must be evaluated before implementation.

Q: What is the primary difference between the 3M D3440-6202-AR and N3440-6202RB?

A: Both parts are functionally identical in electrical and mechanical specifications. The D3440-6202-AR is packaged in trays, while the N3440-6202RB is supplied in bulk. Selection depends on inventory management and procurement requirements.

Q: Are all substitute parts RoHS compliant?

A: Yes. The TE Connectivity 5499910-7 and 3M D3440-6202-AR are ROHS3 compliant. The 3M N3440-6202RB is RoHS compliant. All three parts meet environmental regulatory requirements.

Q: What is the operating temperature difference between the HARTING part and the 3M substitutes?

A: The HARTING 09185306914 operates from -55°C to 125°C. The TE Connectivity 5499910-7 and both 3M parts operate from -55°C to 105°C. Applications requiring operation above 105°C cannot use these substitutes.

Q: Do the substitute parts have the same contact finish specifications?

A: All parts feature gold-plated mating contacts and tin-plated posts. The TE Connectivity 5499910-7 specifies gold or gold-palladium for mating contacts. Contact finish thickness varies across manufacturers but remains within industry standards for 2.54mm pitch connectors.

Q: What is the current rating for each part?

A: The HARTING 09185306914 does not specify a current rating. The TE Connectivity 5499910-7 is rated for 1A. Both 3M parts (D3440-6202-AR and N3440-6202RB) are rated for 1.75A. Application current requirements must be evaluated against these specifications.

Q: Are the contact lengths compatible across all parts?

A: Contact lengths vary slightly. The HARTING mating contact length is 0.228" (5.80mm), while all three substitutes are 0.240" (6.10mm). These variations remain within acceptable tolerances for standard through-hole solder termination and do not affect functional compatibility.