HARTING 09185265913 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The HARTING 09185265913 is a shrouded right-angle rectangular connector header with 26 positions at 2.54mm pitch, designed for through-hole solder termination in board-to-cable/wire applications. This SEK series component features male pins with gold-plated mating contacts and tin-plated posts, operating across -55°C to 125°C. The part is active in production and ROHS3 compliant with UL94 V-0 flammability rating.

Equivalent and substitute parts are necessary when the original manufacturer part becomes unavailable, when alternative packaging formats are required, or when design flexibility permits selection from qualified alternatives meeting the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Connector Type	Header, Shrouded - 4 Wall
Pitch - Mating	0.100" (2.54mm)
Number of Positions	26
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Contact Type	Male Pin
Termination	Solder
Contact Finish - Mating	Gold
Contact Finish - Post	Tin
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09185265913 is determined by strict equivalence across the following critical parameters:

Connector pitch and position count: 0.100" (2.54mm) mating pitch with 26 positions in 2-row configuration
Mounting and orientation: Through-hole, right-angle mounting
Contact configuration: Male pins with gold mating finish and tin post finish
Shrouding: 4-wall shrouded design with keying slot and mounting flange
Termination method: Solder termination
Compliance: UL94 V-0 flammability rating and ROHS3 compliance

All substitute parts listed below meet these core electrical and mechanical requirements. Variations in contact post length, insulation height, contact material composition (copper alloy vs. brass), and fastening hook length (short vs. long) are within acceptable substitution parameters for this connector category, as these do not affect mating compatibility or primary electrical performance in standard applications.

Parameter Comparison

Parameter	HARTING 09185265913	TE 5102322-6	TE 5499141-6	TE 5499786-6	TE 5499913-6	Amphenol 71922-126LF	3M D3429-5302-AR	3M N3429-5202RB	3M N3429-5302RB	3M N3429-5303RB
Manufacturer	HARTING	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	Amphenol ICC	3M	3M	3M	3M
Series	SEK	AMP-Latch	AMP-Latch	AMP-Latch	AMP-Latch	Quickie™	D3000	3000	3000	3000
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	26	26	26	26	26	26	26	26	26	26
Number of Rows	2	2	2	2	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.228" (5.80mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)
Contact Length - Post	0.114" (2.90mm)	0.155" (3.94mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.114" (2.90mm)	0.112" (2.84mm)	0.112" (2.84mm)	0.112" (2.84mm)	0.155" (3.94mm)
Insulation Height	0.335" (8.51mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.339" (8.61mm)	0.340" (8.64mm)	0.340" (8.64mm)	0.340" (8.64mm)	0.340" (8.64mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold, GXT™	Gold	Gold	Gold	Gold
Contact Finish Thickness - Mating	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	30.0µin (0.76µm)	10.0µin (0.25µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)
Contact Finish - Post	Tin	Tin	Tin	Tin	Tin	Tin	Tin	Tin	Tin	Tin
Contact Material	Copper Alloy	Brass	Brass	Brass	Brass	Phosphor Bronze	Brass	Copper Alloy	Copper Alloy	Copper Alloy
Operating Temperature	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	Not specified	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging	Bulk	Tray	Tray	Bulk	Bulk	Tube	Tray	Bulk	Bulk	Bulk

Engineering Selection Recommendations

All listed substitute parts maintain active product status and meet UL94 V-0 flammability requirements. Selection among these equivalents should be based on the following factors:

TE Connectivity AMP-Latch Series (5102322-6, 5499141-6, 5499786-6, 5499913-6): These parts offer ROHS3 compliance and are available in both tray and bulk packaging. The AMP-Latch series provides rated current (1A per contact) and voltage (250VAC) specifications. Parts 5499141-6 and 5499786-6 feature longer contact posts (0.110" vs. 0.114"), while 5102322-6 provides extended post length (0.155"). Part 5499913-6 matches the original fastening hook length (short) and is available in bulk packaging.

Amphenol ICC Quickie™ Series (71922-126LF): This part offers RoHS compliance and tube packaging. Contact mating length is slightly reduced (0.228" vs. 0.240"), and contact material is phosphor bronze rather than copper alloy or brass. Operating temperature range is not specified.

3M Series (D3429-5302-AR, N3429-5202RB, N3429-5302RB, N3429-5303RB): The 3M D3000 and 3000 series parts provide ROHS3 compliance (except N3429-5303RB which is RoHS compliant) and rated current (1.75A). These parts feature copper alloy contact material matching the original HARTING design. Post length variations range from 0.112" to 0.155". The N3429 series is available in bulk packaging with higher inventory levels.

For applications requiring the original operating temperature range (-55°C to 125°C), the HARTING 09185265913 and 3M series parts (D3429-5302-AR, N3429-5202RB, N3429-5302RB, N3429-5303RB) are preferred, as TE Connectivity parts are rated to -65°C to 105°C.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity AMP-Latch parts substitute for the HARTING 09185265913 in all applications?

A: TE Connectivity AMP-Latch parts (5102322-6, 5499141-6, 5499786-6, 5499913-6) are mechanically and electrically compatible for mating and termination. However, the operating temperature range is -65°C to 105°C, which does not extend to the original part's upper limit of 125°C. For applications operating above 105°C, the HARTING original or 3M series alternatives are required.

Q: What is the difference between short and long fastening hooks?

A: Fastening hook length affects connector retention force and mating/unmating effort. Short hooks (HARTING 09185265913, TE 5499913-6, 3M N3429-5202RB) provide lighter engagement, while long hooks (TE 5499141-6, TE 5499786-6, 3M D3429-5302-AR, 3M N3429-5302RB, 3M N3429-5303RB) provide stronger retention. Both are functionally equivalent for standard applications; selection depends on specific mechanical requirements.

Q: Does contact post length affect compatibility?

A: Contact post length variations (0.110" to 0.155") do not affect mating compatibility with standard 0.100" pitch receptacles. Post length determines solder joint geometry and PCB hole engagement depth. Selection should match the original design's PCB layout and solder pad specifications.

Q: Are there compliance differences between ROHS3 and RoHS compliant parts?

A: ROHS3 compliance includes additional restrictions on phthalates and other substances beyond the original RoHS directive. For new designs and applications requiring maximum regulatory alignment, ROHS3 compliant parts are preferred. Existing designs using RoHS compliant parts (TE 5499141-6, Amphenol 71922-126LF, 3M N3429-5303RB) remain functionally valid.

Q: What packaging options are available?

A: Substitute parts are available in bulk (HARTING 09185265913, TE 5499786-6, TE 5499913-6, 3M N3429-5202RB, 3M N3429-5302RB, 3M N3429-5303RB), tray (TE 5102322-6, TE 5499141-6, 3M D3429-5302-AR), and tube (Amphenol 71922-126LF) formats. Packaging selection affects handling, storage, and cost per unit but does not affect component performance.

Q: Can I mix contact materials (copper alloy, brass, phosphor bronze) in the same connector?

A: All substitute parts use the same contact finish system (gold mating, tin post) and are designed for the same mating interface. Contact material composition differences do not affect mating compatibility or electrical performance in standard applications. However, for consistency and to avoid potential galvanic corrosion in high-humidity environments, using parts from the same manufacturer series is recommended.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message