HARTING 09185206901 Equivalent & Substitute Parts

Part Overview

The HARTING 09185206901 is a rectangular connector header, right-angle configuration, with 20 positions at 2.54mm pitch. This through-hole, shrouded connector is designed for board-to-cable/wire applications with solder termination and latch lock/eject hook fastening. The part is active in production with 1004 units in current inventory. Equivalent and substitute parts are identified based on matching electrical and mechanical specifications within the rectangular connector category, enabling component selection flexibility for procurement, design revision, or supply chain optimization.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	20
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shrouding	Shrouded - 4 Wall
Contact Shape	Square
Material Flammability Rating	UL94 V-0
Operating Temperature	-55°C ~ 125°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09185206901 are qualified based on the following core parameters that determine functional and mechanical compatibility:

Primary Matching Criteria:

Connector Type: Header
Contact Type: Male Pin
Pitch - Mating: 0.100" (2.54mm)
Number of Positions: 20
Number of Rows: 2
Row Spacing - Mating: 0.100" (2.54mm)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Shrouding: Shrouded - 4 Wall
Contact Shape: Square
Material Flammability Rating: UL94 V-0

Secondary Compatibility Parameters:

Contact Length - Mating: 0.240" (6.10mm)
Insulation Height: Within tolerance range
Features: Keying Slot, Mounting Flange
MSL: 1 (Unlimited)

Substitute parts may vary in contact post length, contact material composition, contact finish specifications, insulation material, and color, provided the primary electrical and mechanical interface parameters remain consistent. All substitute parts listed maintain active product status and compliance with RoHS3 or equivalent environmental standards.

Parameter Comparison

Parameter	HARTING 09185206901	TE 2-5499141-4	TE 2-5499345-4	TE 499786-4	TE 5102322-4	TE 5499141-4	TE 5499786-4	TE 5499913-4	Amphenol 71922-120LF	Amphenol 71922-220LF	3M N3428-5203RB
Manufacturer	HARTING	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	Amphenol ICC (FCI)	Amphenol ICC (FCI)	3M
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	20	20	20	20	20	20	20	20	20	20	20
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.228" (5.80mm)	0.228" (5.80mm)	0.240" (6.10mm)
Contact Length - Post	0.177" (4.50mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.155" (3.94mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.114" (2.90mm)	0.114" (2.90mm)	0.155" (3.94mm)
Insulation Height	0.335" (8.51mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.339" (8.61mm)	0.339" (8.61mm)	0.340" (8.64mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold, GXT™	Gold, GXT™	Gold
Contact Material	Copper Alloy	Brass	Brass	Brass	Brass	Brass	Brass	Brass	Phosphor Bronze	Phosphor Bronze	Copper Alloy
Features	Keying Slot, Mounting Flange	Keying Slot, Mounting Flange	Keying Slot, Mounting Flange	Keying Slot, Mounting Flange	Keying Slot, Mounting Flange	Keying Slot, Mounting Flange	Keying Slot, Mounting Flange	Keying Slot, Mounting Flange	Keying Slot, Mounting Flange	Keying Slot, Mounting Flange	Keying Slot, Mounting Flange
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	Not specified	Not specified	-55°C ~ 105°C
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	Not applicable	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant
MSL	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All listed substitute parts maintain active product status and are suitable for direct replacement in applications requiring a 20-position, 2-row, 2.54mm pitch right-angle header connector with solder termination and 4-wall shrouding.

TE Connectivity AMP-Latch Series (2-5499141-4, 2-5499345-4, 499786-4, 5102322-4, 5499141-4, 5499786-4, 5499913-4): These parts are ROHS3 compliant or RoHS compliant and maintain full compatibility with the primary electrical and mechanical interface. Variations in contact post length (0.110" to 0.155") and fastening hook configuration (long vs. short) allow selection based on specific PCB design requirements. TE Connectivity parts with higher inventory levels (5499141-4: 500,100 units) provide supply chain stability.

Amphenol ICC (FCI) Quickie™ Series (71922-120LF, 71922-220LF): These parts feature phosphor bronze contact material and GXT™ gold finish, with slightly reduced contact mating length (0.228" vs. 0.240"). RoHS compliant status and high inventory availability (3,331-3,511 units) support procurement flexibility. Operating temperature range is not specified; applications requiring -55°C operation should reference detailed datasheets.

3M 3000 Series (N3428-5203RB): This part offers copper alloy contact material matching the HARTING original, ROHS3 compliance, and 1.75A current rating specification. Operating temperature range of -55°C to 105°C aligns closely with the original part specification.

For applications with strict temperature requirements exceeding 105°C, the HARTING 09185206901 original part (-55°C to 125°C) remains the specified choice. For standard industrial applications within -55°C to 105°C range, all listed substitutes are functionally equivalent.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity AMP-Latch parts directly replace the HARTING 09185206901?

A: Yes. TE Connectivity AMP-Latch series parts (2-5499141-4, 2-5499345-4, 499786-4, 5102322-4, 5499141-4, 5499786-4, 5499913-4) match all primary electrical and mechanical interface parameters: 20 positions, 2 rows, 0.100" (2.54mm) pitch, through-hole right-angle mounting, solder termination, and 4-wall shrouding. Variations in contact post length and fastening hook type do not affect mating interface compatibility.

Q: What is the difference between long and short fastening hooks in TE parts?

A: Fastening hook length affects connector retention force and mating/unmating effort. Long hooks (2-5499141-4, 499786-4, 5102322-4, 5499141-4, 5499786-4) provide higher retention force. Short hooks (2-5499345-4, 5499913-4) reduce mating/unmating effort. Selection depends on application requirements for connector stability versus ease of service.

Q: Are Amphenol 71922 series parts compatible with the HARTING original?

A: Yes, with minor dimensional variation. Amphenol 71922-120LF and 71922-220LF maintain all primary interface parameters. Contact mating length is 0.228" versus 0.240" on the HARTING part, a 0.012" reduction. This variation is within typical connector tolerance ranges and does not affect electrical performance. Verify PCB pocket depth if dimensional precision is critical.

Q: What is the significance of contact material differences (copper alloy vs. brass vs. phosphor bronze)?

A: Contact material affects electrical conductivity, spring force retention, and wear characteristics. Copper alloy (HARTING, 3M N3428-5203RB) and brass (TE Connectivity) provide equivalent electrical performance. Phosphor bronze (Amphenol 71922 series) offers enhanced spring properties. All materials are suitable for standard signal and low-power applications.

Q: Which substitute part offers the best supply chain availability?

A: TE Connectivity 5499141-4 maintains the highest inventory level at 500,100 units, providing optimal supply chain stability. Amphenol 71922-220LF (3,331 units) and TE Connectivity 5499786-4 (5,308 units) also offer strong availability for procurement planning.

Q: Are all substitute parts ROHS3 compliant?

A: Most substitute parts are ROHS3 compliant (HARTING 09185206901, TE 2-5499141-4, 2-5499345-4, 5102322-4, 5499786-4, 5499913-4, 3M N3428-5203RB). TE 499786-4 is not RoHS applicable due to tin-lead post finish. TE 5499141-4 is RoHS compliant (not ROHS3 specified). Amphenol 71922 series parts are RoHS compliant. Verify compliance requirements for your specific application.

Q: What packaging options are available?

A: HARTING 09185206901 is supplied in bulk packaging. TE Connectivity parts are available in tray (2-5499141-4, 2-5499345-4, 5102322-4, 5499141-4) or bulk (499786-4, 5499786-4, 5499913-4) packaging. Amphenol 71922 series parts are supplied in tube packaging. Select packaging based on assembly process requirements and inventory management practices.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message