HARTING 09185205913 Equivalent & Substitute Parts

Part Overview

The HARTING 09185205913 is a shrouded rectangular connector header with right-angle mounting, 20 positions, and 2.54mm pitch. This through-hole component features male pins with gold-plated mating contacts and tin-plated posts, designed for board-to-cable/wire applications. The connector is part of the SEK series and maintains active product status with full inventory availability (777 pcs). Equivalent and substitute parts are identified based on matching electrical and mechanical parameters: connector type, contact configuration, pitch, position count, row spacing, mounting style, shrouding, termination method, and operating temperature range.

Key Parameters

Parameter	Specification
Manufacturer Part Number	09185205913
Manufacturer	HARTING
Series	SEK
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	20
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Finish - Mating	Gold
Contact Material	Copper Alloy
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09185205913 are qualified based on strict parameter matching in the following categories:

Primary Matching Criteria (Must Match Exactly):

Connector Type: Header
Contact Type: Male Pin
Pitch - Mating: 0.100" (2.54mm)
Number of Positions: 20
Number of Rows: 2
Row Spacing - Mating: 0.100" (2.54mm)
Mounting Type: Through Hole, Right Angle
Shrouding: Shrouded - 4 Wall
Termination: Solder
Style: Board to Cable/Wire
Material Flammability Rating: UL94 V-0

Secondary Compatibility Parameters (Allowable Variations):

Contact Length - Mating: 0.228" to 0.240" (5.80mm to 6.10mm)
Contact Length - Post: 0.110" to 0.155" (2.79mm to 3.94mm)
Insulation Height: 0.315" to 0.340" (8.00mm to 8.64mm)
Contact Finish - Mating: Gold or Gold-Palladium
Contact Material: Copper Alloy, Brass, or Phosphor Bronze
Operating Temperature Range: Minimum -65°C, Maximum 105°C or higher
Fastening Type: Latch Lock/Eject Hooks (Short or Long variants acceptable)

Substitute parts from TE Connectivity AMP Connectors (AMP-Latch series), Amphenol ICC (Quickie™ series), and 3M (3000 series) meet these criteria with documented compatibility for direct replacement applications.

Parameter Comparison

Parameter	HARTING 09185205913	TE 2-5499141-4	TE 2-5499345-4	TE 499786-4	TE 5102322-4	TE 5499141-4	TE 5499786-4	TE 5499913-4	Amphenol 71922-120LF	Amphenol 71922-220LF	3M N3428-5203RB
Manufacturer	HARTING	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	TE Connectivity	Amphenol ICC	Amphenol ICC	3M
Series	SEK	AMP-Latch	AMP-Latch	AMP-Latch	AMP-Latch	AMP-Latch	AMP-Latch	AMP-Latch	Quickie™	Quickie™	3000
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	20	20	20	20	20	20	20	20	20	20	20
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.228" (5.80mm)	0.228" (5.80mm)	0.240" (6.10mm)
Contact Length - Post	0.114" (2.90mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.155" (3.94mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.114" (2.90mm)	0.114" (2.90mm)	0.155" (3.94mm)
Insulation Height	0.335" (8.51mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.339" (8.61mm)	0.339" (8.61mm)	0.340" (8.64mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold, GXT™	Gold, GXT™	Gold
Contact Finish Thickness - Mating	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	15.0µin (0.38µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)
Contact Finish - Post	Tin	Tin	Tin	Tin-Lead	Tin	Tin	Tin	Tin	Tin	Tin	Tin
Contact Material	Copper Alloy	Brass	Brass	Brass	Brass	Brass	Brass	Brass	Phosphor Bronze	Phosphor Bronze	Copper Alloy
Operating Temperature	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	Not specified	Not specified	-55°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	Not applicable	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging	Bulk	Tray	Tray	Bulk	Tray	Tray	Bulk	Bulk	Tube	Tube	Bulk
Inventory (Pcs)	777	1876	1313	1015	1217	500100	5308	1656	3511	3331	1890

Engineering Selection Recommendations

TE Connectivity AMP-Latch Series (Primary Substitutes)

The TE Connectivity AMP-Latch series connectors (part numbers 2-5499141-4, 2-5499345-4, 499786-4, 5102322-4, 5499141-4, 5499786-4, 5499913-4) provide direct functional equivalence to the HARTING 09185205913. All AMP-Latch variants maintain ROHS3 compliance (except 499786-4 which is not applicable), UL94 V-0 flammability rating, and MSL 1 moisture sensitivity. These connectors feature brass contact material with gold or gold-palladium mating finishes and tin post finishes. Operating temperature range is -65°C to 105°C, which covers the HARTING part's minimum temperature requirement but operates at a lower maximum temperature (105°C versus 125°C). TE 5499141-4 offers the highest inventory availability (500,100 pcs) among all substitutes.

Amphenol ICC Quickie™ Series (Alternative Substitutes)

Amphenol ICC 71922-120LF and 71922-220LF (Quickie™ series) provide mechanical and electrical compatibility with identical pitch, position count, and mounting configuration. These connectors feature phosphor bronze contact material with gold GXT™ mating finish and tin post finish. Operating temperature range is not specified in available documentation. Both parts maintain UL94 V-0 flammability rating and MSL 1 moisture sensitivity. RoHS compliance is confirmed. Contact length for mating is 0.228" (5.80mm), which is within acceptable tolerance versus the HARTING specification of 0.240" (6.10mm).

3M 3000 Series (Alternative Substitute)

The 3M N3428-5203RB connector provides functional compatibility with matching pitch, position count, and mounting type. This part features copper alloy contact material with gold mating finish and tin post finish, similar to the HARTING original. Operating temperature range is -55°C to 105°C, matching the HARTING minimum but operating at a lower maximum. The connector maintains ROHS3 compliance, UL94 V-0 flammability rating, and MSL 1 moisture sensitivity. Contact length for post is 0.155" (3.94mm), which exceeds the HARTING specification of 0.114" (2.90mm) but remains within acceptable mechanical tolerance for board-to-cable applications.

Compliance and Regulatory Considerations

All substitute parts maintain UL94 V-0 material flammability rating and MSL 1 moisture sensitivity level, ensuring compatibility with the original part's environmental and regulatory requirements. ROHS3 compliance is confirmed for most substitutes (exceptions: TE 499786-4 marked as not applicable; Amphenol 71922 series marked as RoHS Compliant without ROHS3 designation). For applications requiring strict ROHS3 compliance, select from TE 2-5499141-4, 2-5499345-4, 5102322-4, 5499141-4, 5499786-4, 5499913-4, or 3M N3428-5203RB.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity AMP-Latch connectors directly replace the HARTING 09185205913 in existing designs?

A: Yes. All AMP-Latch variants (2-5499141-4, 2-5499345-4, 499786-4, 5102322-4, 5499141-4, 5499786-4, 5499913-4) match the critical parameters: 20-position, 2-row, 2.54mm pitch, right-angle through-hole mounting, shrouded 4-wall configuration, and solder termination. Mechanical footprint compatibility is confirmed. The primary design consideration is the operating temperature maximum of 105°C versus the HARTING specification of 125°C; applications operating above 105°C require the original HARTING part or evaluation of thermal requirements.

Q: What is the difference between TE 5499141-4 and TE 2-5499141-4?

A: Both parts are functionally equivalent AMP-Latch series connectors with identical electrical and mechanical specifications. The primary difference is packaging: TE 5499141-4 is supplied in Tray packaging with significantly higher inventory (500,100 pcs), while TE 2-5499141-4 is supplied in Tray packaging with lower inventory (1,876 pcs). For high-volume production, TE 5499141-4 offers superior availability.

Q: Are Amphenol ICC Quickie™ series connectors (71922-120LF, 71922-220LF) suitable for applications requiring specified operating temperature ranges?

A: Amphenol ICC Quickie™ connectors meet all mechanical and electrical compatibility requirements with the HARTING 09185205913. However, operating temperature range is not specified in available technical documentation. For applications with defined temperature operating requirements, TE Connectivity AMP-Latch series (-65°C to 105°C) or 3M N3428-5203RB (-55°C to 105°C) provide documented thermal specifications.

Q: What packaging options are available for substitute parts?

A: Substitute parts are available in three packaging formats: Bulk (HARTING 09185205913, TE 499786-4, TE 5499786-4, TE 5499913-4, 3M N3428-5203RB), Tray (TE 2-5499141-4, TE 2-5499345-4, TE 5102322-4, TE 5499141-4), and Tube (Amphenol 71922-120LF, 71922-220LF). Packaging selection depends on production volume and handling requirements; bulk packaging is typical for high-volume applications, while tray and tube packaging accommodate smaller order quantities.

Q: Does the difference in contact material (copper alloy versus brass versus phosphor bronze) affect electrical performance?

A: Contact material differences do not affect electrical performance for standard signal and power applications within the specified current and voltage ratings. All materials (copper alloy, brass, phosphor bronze) provide equivalent conductivity and contact resistance characteristics. Material selection is driven by manufacturing process, cost, and mechanical durability requirements. For applications with specific material requirements (e.g., RoHS compliance, lead-free solder compatibility), verify material composition in the connector datasheet.

Q: Can connectors with different contact post lengths be used interchangeably?

A: Contact post length variation (0.110" to 0.155") is acceptable for board-to-cable/wire applications where the connector mates with a corresponding socket or receptacle. Post length affects solder joint geometry and PCB hole engagement depth but does not impact electrical function. For applications with tight mechanical constraints (e.g., stacked connectors, limited PCB thickness), verify post length compatibility with the mating receptacle and PCB design specifications.

Q: Which substitute part offers the best inventory availability?

A: TE Connectivity 5499141-4 provides the highest inventory availability with 500,100 pcs in stock, followed by TE 5499786-4 (5,308 pcs) and Amphenol 71922-120LF (3,511 pcs). For immediate availability and high-volume production, TE 5499141-4 is the recommended choice.

Q: Are there any RoHS compliance differences between substitute parts?

A: Most substitute parts are ROHS3 Compliant. Exception: TE 499786-4 is marked as "Not applicable" for RoHS status and carries REACH Affected designation, indicating this part may contain restricted substances. For applications requiring strict ROHS3 compliance, exclude TE 499786-4 and select from TE 2-5499141-4, 2-5499345-4, 5102322-4, 5499141-4, 5499786-4, 5499913-4, or 3M N3428-5203RB.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message