HARTING 09185167321 Equivalent & Substitute Parts

Part Overview

The HARTING 09185167321 is a rectangular connector header designed for through-hole, right-angle mounting applications. This 16-position connector operates at 2.54mm (0.100") pitch and features shrouded 4-wall construction with solder termination. The part is currently active in production with 796 units in stock. Substitute parts are identified to address inventory availability, lead time requirements, or specific application constraints while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Manufacturer Part Number	09185167321
Manufacturer	HARTING
Series	SEK
Connector Type	Header
Contact Type	Male Pin
Number of Positions	16
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Finish - Mating	Gold
Insulation Material	Polybutylene Terephthalate (PBT), Glass Filled
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09185167321 are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Primary Compatibility Criteria:

Number of Positions: 16
Number of Rows: 2
Pitch - Mating: 0.100" (2.54mm)
Row Spacing - Mating: 0.100" (2.54mm)
Connector Type: Header
Contact Type: Male Pin
Mounting Type: Through Hole, Right Angle
Shrouding: Shrouded - 4 Wall
Termination: Solder
Contact Shape: Square
Features: Keying Slot
Material Flammability Rating: UL94 V-0

Secondary Compatibility Parameters:

Contact Finish - Mating: Gold (primary) or Gold-Palladium (acceptable)
Insulation Material: PBT-based or equivalent thermoplastic
Operating Temperature Range: Must encompass application requirements
RoHS/REACH Compliance: Dependent on end-use regulatory requirements

All substitute parts listed maintain these core electrical and mechanical specifications. Variations in contact post length, insulation height, contact finish thickness, and fastening type (Push-Pull vs. Latch Holder) do not affect mating compatibility with standard 2.54mm pitch connectors.

Parameter Comparison

Parameter	HARTING 09185167321	TE 103310-3	TE 103311-3	3M 30316-5002HB	TE 5103310-3	TE 5103311-3	Amphenol 75867-103LF	Amphenol 75867-303LF	Hirose HIF3F-16PA-2.54DS(71)	Hirose HIF3FC-16PA-2.54DS(71)	3M N2516-5002-RB
Number of Positions	16	16	16	16	16	16	16	16	16	16	16
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold, GXT™	Gold, GXT™	Gold	Gold	Gold
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.236" (6.00mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.236" (6.00mm)	0.236" (6.00mm)	0.236" (6.00mm)	0.236" (6.00mm)	0.243" (6.17mm)
Contact Length - Post	0.177" (4.50mm)	0.135" (3.43mm)	0.135" (3.43mm)	0.110" (2.79mm)	0.135" (3.43mm)	0.135" (3.43mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.118" (3.00mm)	0.118" (3.00mm)	0.112" (2.84mm)
Insulation Height	0.366" (9.30mm)	0.360" (9.14mm)	0.360" (9.14mm)	0.331" (8.40mm)	0.360" (9.14mm)	0.360" (9.14mm)	0.362" (9.20mm)	0.362" (9.20mm)	0.335" (8.51mm)	0.335" (8.51mm)	0.338" (8.59mm)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-55°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	Not specified	Not specified	-55°C ~ 85°C	-55°C ~ 85°C	-55°C ~ 105°C
RoHS Status	ROHS3 Compliant	RoHS non-compliant	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

RoHS3 Compliant Substitutes (Preferred for Regulated Applications):

TE Connectivity 5103310-3
TE Connectivity 5103311-3
Hirose HIF3FC-16PA-2.54DS(71)

These parts maintain ROHS3 compliance matching the original HARTING 09185167321 specification and are suitable for applications requiring full RoHS3 certification.

RoHS Compliant Substitutes (General Industrial Use):

3M 30316-5002HB
Amphenol ICC 75867-103LF
Amphenol ICC 75867-303LF
Hirose HIF3F-16PA-2.54DS(71)
3M N2516-5002-RB

These parts meet RoHS compliance requirements and are suitable for standard industrial applications where ROHS3 certification is not mandated.

Non-RoHS Compliant Substitutes (Legacy Applications Only):

TE Connectivity 103310-3
TE Connectivity 103311-3

These parts are RoHS non-compliant and should be used only in applications where RoHS compliance is not required or for legacy system maintenance.

Temperature Range Considerations: The original HARTING part operates to 125°C. Hirose HIF3F and HIF3FC models are rated to 85°C maximum. Select these substitutes only for applications with maximum operating temperatures not exceeding 85°C. All other substitutes support 105°C or higher operation.

Frequently Asked Questions (FAQ)

Q: Are all listed substitute parts mechanically compatible with the HARTING 09185167321?

A: Yes. All substitute parts share identical mating pitch (0.100" / 2.54mm), row spacing (0.100" / 2.54mm), number of positions (16), number of rows (2), mounting type (through-hole right-angle), shrouding (4-wall), and contact shape (square). These parameters ensure mechanical interchangeability with standard 2.54mm pitch connectors.

Q: What is the difference between Latch Holder and Push-Pull fastening types?

A: The HARTING 09185167321 uses Latch Holder fastening. Most substitute parts use Push-Pull fastening. Both fastening types are compatible with standard 2.54mm pitch mating connectors. The fastening type affects only the mating force and connector retention mechanism, not electrical or mechanical compatibility.

Q: Can I use a substitute part with a lower operating temperature rating?

A: Only if your application's maximum operating temperature does not exceed the substitute part's rating. The Hirose HIF3F and HIF3FC models are rated to 85°C maximum. If your application requires operation above 85°C, select substitutes rated to 105°C or higher.

Q: Which substitute parts are suitable for RoHS-regulated applications?

A: For ROHS3 compliance, use TE Connectivity 5103310-3, TE Connectivity 5103311-3, or Hirose HIF3FC-16PA-2.54DS(71). For standard RoHS compliance, use 3M 30316-5002HB, Amphenol ICC 75867-103LF, Amphenol ICC 75867-303LF, Hirose HIF3F-16PA-2.54DS(71), or 3M N2516-5002-RB. TE Connectivity 103310-3 and 103311-3 are not RoHS compliant.

Q: What is the difference between contact post lengths across substitute parts?

A: Contact post length varies from 0.110" (2.79mm) to 0.177" (4.50mm). This parameter affects PCB hole depth requirements and solder joint geometry but does not affect mating compatibility. Verify PCB design accommodates the selected substitute's post length.

Q: Are all substitute parts available in the same packaging as the original?

A: No. The HARTING 09185167321 is packaged in Bulk. Substitute parts are available in Bulk, Tube, or Tray packaging. Packaging does not affect electrical or mechanical performance. Select based on inventory requirements and handling preferences.

Q: Can I mix different substitute parts in the same assembly?

A: Yes, provided all selected parts meet your application's electrical, mechanical, and compliance requirements. All listed substitutes are mechanically compatible with each other and with standard 2.54mm pitch mating connectors.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message