HARTING 09185165913 Rectangular Connector Header - Equivalent & Substitute Parts

Part Overview

The HARTING 09185165913 is a through-hole, right-angle rectangular connector header with 16 positions at 2.54mm pitch, designed for board-to-cable/wire applications. This connector features shrouded 4-wall construction with latch lock/eject hooks and gold-plated mating contacts. The part is active in production with 941 units currently in stock. Substitute parts are identified to address supply chain requirements, packaging preferences, or specific application constraints while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Number of Positions	16
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Finish - Mating	Gold
Material Flammability Rating	UL94 V-0
Operating Temperature Range	-55°C ~ 125°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following core parameters:

Connector Type & Contact Configuration: Header with male pins, 16 positions, 2 rows
Pitch Specifications: Mating pitch 0.100" (2.54mm) and row spacing 0.100" (2.54mm)
Mounting & Orientation: Through-hole, right-angle configuration
Shrouding & Fastening: Shrouded 4-wall construction with latch lock/eject hooks
Termination Method: Solder termination
Contact Finish - Mating: Gold plating
Flammability & Compliance: UL94 V-0 rating, RoHS3 compliance

All substitute parts listed maintain these core parameters. Variations in contact post length, insulation height, contact material composition, and packaging format are permitted within the scope of functional equivalence for this connector category.

Parameter Comparison

Parameter	HARTING 09185165913	TE 5102322-3	TE 5499141-3	TE 5499913-3	Amphenol 71922-116LF	3M N3408-5202RB	3M N3408-5302RB	3M N3408-5303RB
Manufacturer	HARTING	TE Connectivity	TE Connectivity	TE Connectivity	Amphenol ICC (FCI)	3M	3M	3M
Series	SEK	AMP-Latch	AMP-Latch	AMP-Latch	Quickie™	3000	3000	3000
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	16	16	16	16	16	16	16	16
Number of Rows	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Long	Latch Lock/Eject Hooks, Long	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks	Latch Lock/Eject Hooks, Short	Latch Lock/Eject Hooks, Long	Latch Lock/Eject Hooks, Long
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.228" (5.80mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)
Contact Length - Post	0.114" (2.90mm)	0.155" (3.94mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.114" (2.90mm)	0.112" (2.84mm)	0.112" (2.84mm)	0.155" (3.94mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold, GXT™	Gold	Gold	Gold
Contact Finish Thickness - Mating	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	15.0µin (0.38µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)
Contact Material	Copper Alloy	Brass	Brass	Brass	Phosphor Bronze	Copper Alloy	Copper Alloy	Copper Alloy
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	Not Specified	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C
RoHS Status	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging	Bulk	Tray	Tray	Bulk	Tube	Bulk	Tray	Bulk
Inventory Status	941 Pcs	1766 Pcs	72899 Pcs	1557 Pcs	2100 Pcs	1215 Pcs	2070 Pcs	1206 Pcs

Engineering Selection Recommendations

All listed substitute parts maintain active product status and comply with RoHS and UL94 V-0 flammability requirements. Selection among substitutes should be based on the following factors:

TE Connectivity 5499141-3: Highest inventory availability (72,899 units). Suitable for applications requiring long fastening hooks and standard operating temperature range (-65°C to 105°C). Tray packaging supports high-volume production environments.

TE Connectivity 5499913-3: Bulk packaging equivalent to the HARTING original. Short fastening hooks match the original design. Suitable for direct replacement in existing assembly processes.

TE Connectivity 5102322-3: Extended contact post length (0.155", 3.94mm) accommodates thicker PCB assemblies. Tray packaging preferred for automated pick-and-place operations.

3M N3408-5202RB: Bulk packaging with short fastening hooks. Copper alloy contacts match the original material specification. Current rating of 1.75A specified.

3M N3408-5303RB: Extended contact post length (0.155", 3.94mm) for applications requiring deeper PCB penetration. Bulk packaging format.

3M N3408-5302RB: Long fastening hooks with standard contact post length (0.112", 2.84mm). Tray packaging for automated assembly.

Amphenol ICC 71922-116LF: Quickie™ series with phosphor bronze contacts. Tube packaging format. Slightly reduced mating contact length (0.228", 5.80mm) compared to standard specification.

Frequently Asked Questions (FAQ)

Q: Can I substitute the HARTING 09185165913 with any of the listed parts?

A: Yes. All listed parts maintain the core electrical and mechanical specifications: 16-position, 2-row header configuration at 2.54mm pitch, through-hole right-angle mounting, shrouded 4-wall construction, solder termination, and gold-plated mating contacts. Functional compatibility is confirmed across all substitutes.

Q: What is the difference between short and long fastening hooks?

A: Fastening hook length affects mating force and connector retention. Short hooks (HARTING 09185165913, TE 5499913-3, 3M N3408-5202RB) provide standard retention. Long hooks (TE 5102322-3, TE 5499141-3, 3M N3408-5302RB, 3M N3408-5303RB) increase mechanical retention force. Selection depends on application requirements for connector stability during vibration or thermal cycling.

Q: Does contact post length affect PCB compatibility?

A: Contact post length determines insertion depth into PCB vias. Standard length (0.110" to 0.114") suits typical PCB thicknesses. Extended length (0.155", 3.94mm) accommodates thicker assemblies or multi-layer boards. Verify PCB via depth before selecting extended-post variants.

Q: What packaging formats are available?

A: Bulk packaging (loose components) suits manual assembly and prototyping. Tray packaging supports automated pick-and-place systems. Tube packaging (Amphenol 71922-116LF) provides alternative handling for specific production workflows. Select based on assembly process requirements.

Q: Are there temperature range differences between substitutes?

A: The HARTING original operates -55°C to 125°C. TE Connectivity and 3M substitutes operate -55°C to 105°C or -65°C to 105°C. For applications exceeding 105°C, the HARTING original provides extended upper temperature capability. Amphenol 71922-116LF does not specify operating temperature.

Q: What is the significance of contact material differences?

A: HARTING and 3M use copper alloy contacts; TE Connectivity uses brass; Amphenol uses phosphor bronze. All materials support gold plating and maintain electrical performance within this connector category. Material selection reflects manufacturer design philosophy and does not affect functional compatibility.

Q: Can I mix fastening hook styles in the same assembly?

A: Fastening hook style is a connector-level specification. Within a single assembly, maintain consistency in hook style to ensure uniform mating force and retention characteristics across all connectors.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message