HARTING 09185165321 Equivalent & Substitute Parts

Part Overview

The HARTING 09185165321 is a rectangular connector header, right-angle configuration, with 16 positions at 2.54mm pitch. This through-hole, shrouded connector features male pins with gold-plated mating contacts and tin-plated posts, designed for board-to-cable/wire applications. The part is active in production status with 963 units currently in stock. Equivalent and substitute parts are identified based on matching electrical and mechanical specifications within the rectangular connector category, enabling component selection flexibility for procurement, inventory management, and design compatibility requirements.

Key Parameters

Parameter	Value
Manufacturer Part Number	09185165321
Manufacturer	HARTING
Category	Rectangular Connectors
Connector Type	Header
Contact Type	Male Pin
Number of Positions	16
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Shape	Square
Operating Temperature Range	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09185165321 are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Primary Matching Criteria:

Connector Type: Header
Contact Type: Male Pin
Number of Positions: 16
Number of Rows: 2
Pitch - Mating: 0.100" (2.54mm)
Row Spacing - Mating: 0.100" (2.54mm)
Mounting Type: Through Hole, Right Angle
Shrouding: Shrouded - 4 Wall
Termination: Solder
Contact Shape: Square
Material Flammability Rating: UL94 V-0

Secondary Compatibility Parameters:

Contact Length - Mating: 0.236" to 0.243" (6.00mm to 6.17mm)
Contact Length - Post: 0.110" to 0.177" (2.79mm to 4.50mm)
Insulation Height: 0.331" to 0.366" (8.40mm to 9.30mm)
Operating Temperature Range: Minimum -55°C, Maximum 85°C to 125°C
Contact Finish - Mating: Gold or Gold-Palladium
Contact Material: Brass, Copper Alloy, or Phosphor Bronze
Insulation Material: Polybutylene Terephthalate (PBT), Polyester, or Thermoplastic, Glass Filled

Substitute parts listed below meet all primary criteria and fall within acceptable ranges for secondary parameters. Variations in fastening type (Latch Holder vs. Push-Pull), contact finish thickness, and packaging format do not affect electrical or mechanical interchangeability for standard board-to-cable/wire applications.

Parameter Comparison

Parameter	HARTING 09185165321	TE 103310-3	TE 103311-3	3M 30316-5002HB	TE 5103310-3	TE 5103311-3	Amphenol 75867-103LF	Amphenol 75867-303LF	Hirose HIF3F-16PA-2.54DS(71)	Hirose HIF3FC-16PA-2.54DS(71)	3M N2516-5002-RB
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Number of Positions	16	16	16	16	16	16	16	16	16	16	16
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.236" (6.00mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.236" (6.00mm)	0.236" (6.00mm)	0.236" (6.00mm)	0.236" (6.00mm)	0.243" (6.17mm)
Contact Length - Post	0.177" (4.50mm)	0.135" (3.43mm)	0.135" (3.43mm)	0.110" (2.79mm)	0.135" (3.43mm)	0.135" (3.43mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.118" (3.00mm)	0.118" (3.00mm)	0.112" (2.84mm)
Insulation Height	0.366" (9.30mm)	0.360" (9.14mm)	0.360" (9.14mm)	0.331" (8.40mm)	0.360" (9.14mm)	0.360" (9.14mm)	0.362" (9.20mm)	0.362" (9.20mm)	0.335" (8.51mm)	0.335" (8.51mm)	0.338" (8.59mm)
Contact Finish - Mating	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold, GXT™	Gold, GXT™	Gold	Gold	Gold
Contact Finish - Post	Tin	Tin-Lead	Tin-Lead	Gold	Tin	Tin	Tin	Tin	Tin	Tin	Tin
Contact Material	Copper Alloy	Brass	Brass	Brass	Brass	Brass	Phosphor Bronze	Phosphor Bronze	Brass	Brass	Copper Alloy
Operating Temperature Range	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-55°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	Not Specified	Not Specified	-55°C ~ 85°C	-55°C ~ 85°C	-55°C ~ 105°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	RoHS Non-Compliant	RoHS Non-Compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

RoHS3 Compliant Substitutes (Preferred for Regulatory Alignment):

TE Connectivity 5103310-3
TE Connectivity 5103311-3
Hirose HIF3FC-16PA-2.54DS(71)

These parts maintain ROHS3 compliance status matching the original HARTING 09185165321, ensuring consistency with environmental and regulatory requirements.

RoHS Compliant Substitutes (Alternative Compliance Path):

3M 30316-5002HB
Amphenol ICC 75867-103LF
Amphenol ICC 75867-303LF
Hirose HIF3F-16PA-2.54DS(71)
3M N2516-5002-RB

These parts meet RoHS compliance standards and are suitable for applications where ROHS3 designation is not mandatory.

Non-Compliant Substitutes (Legacy or Specific Applications):

TE Connectivity 103310-3
TE Connectivity 103311-3

These parts are RoHS non-compliant and should be selected only when legacy component specifications or specific application requirements mandate their use.

Temperature Range Considerations: The original HARTING part operates from -55°C to 125°C. Hirose HIF3F and HIF3FC models operate to 85°C maximum, limiting their use in high-temperature applications. All other substitutes support -55°C to 105°C or higher, providing adequate thermal performance for most industrial applications.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the HARTING 09185165321?

A: Substitution is based on matching core electrical and mechanical specifications: 16-position, 2-row header configuration at 2.54mm pitch, through-hole right-angle mounting, shrouded 4-wall design, solder termination, and square contact shape. All listed substitutes meet these primary criteria. Secondary parameters such as contact length, insulation height, and contact material fall within acceptable ranges that maintain functional compatibility.

Q: Are there differences in fastening type between the original and substitutes?

A: Yes. The HARTING 09185165321 uses a Latch Holder fastening mechanism, while most substitutes employ Push-Pull fastening. Both mechanisms provide secure mating and are functionally equivalent for board-to-cable/wire applications. The choice between them depends on application-specific requirements for mating force and connector retention.

Q: How do contact material differences affect compatibility?

A: The original part uses Copper Alloy contacts, while substitutes employ Brass or Phosphor Bronze. All three materials provide adequate electrical conductivity and mechanical durability for standard signal and power distribution applications. Material selection does not affect interchangeability for typical PCB-to-harness connections.

Q: What is the significance of contact finish thickness variations?

A: Contact finish thickness (measured in microinches or micrometers) affects contact durability and wear resistance. The original HARTING part specifies 30.0µin (0.76µm) gold on mating contacts. Substitutes range from 8.00µin to 30.0µin. Thicker finishes provide extended contact life in high-cycle mating applications; thinner finishes are acceptable for standard industrial use. All specified finishes meet UL94 V-0 flammability requirements.

Q: Which substitutes are best for RoHS-regulated applications?

A: For ROHS3 compliance matching the original part, select TE Connectivity 5103310-3, TE Connectivity 5103311-3, or Hirose HIF3FC-16PA-2.54DS(71). For RoHS compliance (non-ROHS3), 3M 30316-5002HB, Amphenol ICC 75867-103LF, Amphenol ICC 75867-303LF, Hirose HIF3F-16PA-2.54DS(71), and 3M N2516-5002-RB are suitable. TE Connectivity 103310-3 and 103311-3 are RoHS non-compliant and should not be used in regulated environments.

Q: Are packaging format differences (Bulk, Tube, Tray) significant for substitution?

A: Packaging format affects order quantity, storage, and handling but does not impact electrical or mechanical performance. The original HARTING part is supplied in Bulk packaging. Substitutes are available in Bulk, Tube, or Tray formats. Select packaging based on procurement volume and inventory management requirements.

Q: What is the operating temperature limitation for Hirose substitutes?

A: Hirose HIF3F-16PA-2.54DS(71) and HIF3FC-16PA-2.54DS(71) operate from -55°C to 85°C maximum, compared to the original HARTING part's -55°C to 125°C range. These Hirose models are suitable for applications with maximum operating temperatures up to 85°C. For applications requiring operation above 85°C, select TE Connectivity, 3M, or Amphenol substitutes rated to 105°C or higher.

Q: Can I mix different substitute parts in the same assembly?

A: All listed substitutes are mechanically and electrically compatible with each other due to matching pitch, position count, and contact configuration. However, mixing different manufacturers or series in a single assembly may complicate procurement, inventory tracking, and future maintenance. Standardizing on a single substitute part number per assembly is recommended for consistency and supply chain efficiency.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message