HARTING 09185145913 Equivalent & Substitute Parts

Part Overview

The HARTING 09185145913 is a rectangular connector header, right-angle configuration, with 14 positions at 2.54mm pitch. This through-hole, shrouded connector features male pins with gold-plated mating contacts and tin-plated posts, designed for board-to-cable/wire applications. The part is active in production with 1076 units in stock. Equivalent and substitute parts are identified based on matching electrical and mechanical specifications within the 0.100" (2.54mm) pitch rectangular connector category.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	14
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall
Termination	Solder
Contact Finish - Mating	Gold
Contact Finish - Post	Tin
Material Flammability Rating	UL94 V-0
Operating Temperature	-55°C ~ 125°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following core parameters:

Connector type (Header)
Contact type (Male Pin)
Pitch - mating (0.100" / 2.54mm)
Number of positions (14)
Number of rows (2)
Row spacing - mating (0.100" / 2.54mm)
Mounting type (Through Hole, Right Angle)
Shrouding (Shrouded - 4 Wall)
Termination (Solder)
Material flammability rating (UL94 V-0)
Moisture sensitivity level (MSL 1)

All identified substitute parts match these core parameters. Variations in contact length, insulation height, contact finish thickness, fastening type (short vs. long hooks), and post finish material are secondary parameters that do not preclude substitution within the same functional category.

Parameter Comparison

Parameter	HARTING 09185145913	TE 499141-2	TE 499786-2	TE 5499141-2	TE 5499786-2	TE 5499913-2	Amphenol 71922-114LF	3M N3314-5202RB	3M N3314-5203RB	3M N3314-5302RB
Connector Type	Header	Header	Header	Header	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	14	14	14	14	14	14	14	14	14	14
Number of Rows	2	2	2	2	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.228" (5.80mm)	0.240" (6.10mm)	0.240" (6.10mm)	0.240" (6.10mm)
Contact Length - Post	0.114" (2.90mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.110" (2.79mm)	0.114" (2.90mm)	0.112" (2.84mm)	0.155" (3.94mm)	0.112" (2.84mm)
Insulation Height	0.335" (8.51mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.315" (8.00mm)	0.339" (8.61mm)	0.340" (8.64mm)	0.340" (8.64mm)	0.340" (8.64mm)
Contact Shape	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold or Gold-Palladium	Gold, GXT™	Gold	Gold	Gold
Contact Finish Thickness - Mating	30.0µin (0.76µm)	30.0µin (0.76µm)	15.0µin (0.38µm)	30.0µin (0.76µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)	30.0µin (0.76µm)
Contact Finish - Post	Tin	Tin-Lead	Tin-Lead	Tin	Tin	Tin	Tin	Tin	Tin	Tin
Contact Material	Copper Alloy	Brass	Brass	Brass	Brass	Brass	Phosphor Bronze	Copper Alloy	Copper Alloy	Copper Alloy
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	-55°C ~ 125°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	-65°C ~ 105°C	Not specified	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C
RoHS Status	ROHS3 Compliant	Not applicable	Not applicable	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Packaging	Bulk	Bulk	Bulk	Tray	Bulk	Bulk	Tube	Bulk	Bulk	Bulk
Inventory (Pcs)	1076	682	891	10300	1228	1751	4552	8020	1468	2941

Engineering Selection Recommendations

All substitute parts listed are active products with UL94 V-0 flammability rating and MSL 1 classification, matching the core functional requirements of the HARTING 09185145913.

TE Connectivity AMP-Latch Series (499141-2, 499786-2, 5499141-2, 5499786-2, 5499913-2): These parts are direct functional equivalents with identical pitch, position count, and shrouding. TE 5499141-2 offers the highest inventory availability (10,300 units) and is packaged in trays. TE 5499913-2 matches the short fastening hook configuration of the original part. TE parts with base numbers 499141 and 499786 carry "Not applicable" RoHS status; TE parts with base numbers 5499141, 5499786, and 5499913 are ROHS3 Compliant or RoHS Compliant.

Amphenol ICC Quickie™ Series (71922-114LF): This part maintains functional compatibility with identical pitch and position count. It features phosphor bronze contacts and is packaged in tubes with 4,552 units in stock. Operating temperature range is not specified in the provided data.

3M 3000 Series (N3314-5202RB, N3314-5203RB, N3314-5302RB): All three 3M parts are RoHS Compliant with operating temperature range -55°C ~ 105°C. N3314-5202RB and N3314-5302RB differ in fastening type (short vs. long hooks) and contact post length. N3314-5203RB features an extended contact post length of 0.155" (3.94mm). All 3M parts support 1.75A current rating per contact.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the HARTING 09185145913?

A: Substitution eligibility is based on matching core parameters: 0.100" (2.54mm) pitch, 14 positions in 2 rows, through-hole right-angle mounting, shrouded 4-wall configuration, solder termination, and UL94 V-0 flammability rating. All listed parts meet these criteria.

Q: Are there differences in contact materials between the main part and substitutes?

A: Yes. The HARTING part uses copper alloy contacts. TE Connectivity parts use brass contacts. Amphenol ICC uses phosphor bronze. 3M parts use copper alloy. These material variations do not affect functional compatibility within the specified electrical and mechanical parameters.

Q: What is the significance of fastening type differences (short vs. long hooks)?

A: Fastening type affects the mechanical engagement mechanism between header and mating connector. Short hooks (HARTING 09185145913, 3M N3314-5202RB, 3M N3314-5203RB, TE 5499913-2) and long hooks (TE 499141-2, TE 499786-2, TE 5499141-2, TE 5499786-2, 3M N3314-5302RB) provide equivalent locking function. Selection depends on mating connector compatibility.

Q: How do contact post length variations affect substitution?

A: Contact post length determines solder joint depth on the PCB. The HARTING part specifies 0.114" (2.90mm). Substitute parts range from 0.110" to 0.155" (2.79mm to 3.94mm). Variations within this range are accommodated by standard PCB through-hole tolerances and solder reflow processes. The 3M N3314-5203RB with 0.155" post length is suitable for applications requiring deeper solder engagement.

Q: What packaging options are available?

A: Bulk packaging is standard across most substitutes. TE 5499141-2 is available in trays (10,300 units in stock). Amphenol 71922-114LF is packaged in tubes (4,552 units in stock). Packaging selection depends on assembly process requirements and inventory needs.

Q: Are there RoHS compliance differences?

A: The HARTING part is ROHS3 Compliant. TE 499141-2 and TE 499786-2 show "Not applicable" RoHS status. TE 5499141-2 is ROHS3 Compliant. TE 5499786-2 and TE 5499913-2 are RoHS Compliant. Amphenol 71922-114LF and all 3M parts are RoHS Compliant. For applications requiring ROHS3 Compliant parts, select HARTING 09185145913, TE 5499141-2, or TE 5499913-2.

Q: What is the operating temperature range for each substitute?

A: HARTING 09185145913 operates -55°C ~ 125°C. TE Connectivity parts operate -65°C ~ 105°C. 3M parts operate -55°C ~ 105°C. Amphenol 71922-114LF operating temperature is not specified. For applications requiring the full -55°C ~ 125°C range, the HARTING part is the only option listed.

Q: Do contact finish thickness variations affect electrical performance?

A: Contact finish thickness affects durability and wear resistance. The HARTING part specifies 30.0µin (0.76µm) mating finish. TE parts vary between 15.0µin and 30.0µin. 3M and Amphenol parts specify 30.0µin. Thicker finishes provide extended contact life in high-cycle mating applications. Standard applications tolerate both thickness ranges.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message