HARTING 09185106913001 Equivalent & Substitute Parts

Part Overview

The HARTING 09185106913001 is a rectangular connector header designed for through-hole, right-angle board-to-cable/wire applications. This shrouded 10-position connector with 2.54mm pitch and male pin contacts operates across -55°C to 125°C and features latch lock/eject hook fastening. The part is currently active in production and maintains full inventory availability. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and design standardization across compatible applications.

Substiute Parts

09185106913001

HARTINGIn Stock: 127109185106913001 Datasheet

Current PartRFQ

71922-210LF

Amphenol ICC (FCI)In Stock: 248071922-210LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09185106913001 is determined by strict alignment of the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Mating pitch (0.100" / 2.54mm)
• Position count (10 positions)
• Row configuration (2 rows)
• Row spacing (0.100" / 2.54mm)
• Mounting style (Through Hole, Right Angle)
• Shrouding configuration (Shrouded - 4 Wall)
• Termination method (Solder)
• Fastening mechanism (Latch Lock/Eject Hooks, Short)
• Flammability rating (UL94 V-0)

The Amphenol ICC (FCI) 71922-210LF satisfies all critical substitution parameters and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the HARTING 09185106913001 and Amphenol ICC (FCI) 71922-210LF are active production parts with full RoHS compliance and UL94 V-0 flammability certification. Selection between these parts is based on:

• Supply availability: The Amphenol ICC (FCI) 71922-210LF maintains higher inventory (2376 pcs vs. 1179 pcs).
• Packaging format: HARTING supplies in bulk; Amphenol ICC (FCI) supplies in tube format.
• Compliance status: HARTING meets ROHS3 Compliant; Amphenol ICC (FCI) meets RoHS Compliant standards.
• Contact finish specification: Amphenol ICC (FCI) provides documented contact finish thickness (30.0µin mating, 78.7µin post) and GXT™ gold plating technology.

Both parts satisfy identical electrical and mechanical interface requirements for 10-position, 2.54mm pitch, right-angle header applications.

Frequently Asked Questions (FAQ)

Q: Are these parts mechanically interchangeable?

A: Yes. Both parts share identical mating pitch (2.54mm), position count (10), row configuration (2 rows), contact geometry (square male pins), mounting style (through-hole right angle), and shrouding (4-wall). Physical dimensions for mating and post contact lengths are identical.

Q: What are the key differences between these parts?

A: Primary differences include manufacturer series designation (SEK vs. Quickie™), contact material (Copper Alloy vs. Phosphor Bronze), insulation material composition (Polybutylene Terephthalate vs. Thermoplastic), insulation color (Black vs. Gray), packaging format (Bulk vs. Tube), and documented contact finish thickness specifications.

Q: Can I use the Amphenol ICC (FCI) 71922-210LF as a direct replacement?

A: Yes, the Amphenol ICC (FCI) 71922-210LF is a manufacturer-recommended equivalent that meets all critical substitution parameters for the HARTING 09185106913001.

Q: Are there temperature rating differences?

A: The HARTING 09185106913001 specifies -55°C to 125°C operating temperature. The Amphenol ICC (FCI) 71922-210LF does not provide an explicit operating temperature specification in the available data.

Q: What packaging considerations apply?

A: HARTING supplies the 09185106913001 in bulk packaging; Amphenol ICC (FCI) supplies the 71922-210LF in tube packaging. Tube packaging may provide improved component protection during storage and handling.

Q: Do both parts meet RoHS requirements?

A: Yes. The HARTING 09185106913001 is ROHS3 Compliant; the Amphenol ICC (FCI) 71922-210LF is RoHS Compliant. Both meet RoHS directive requirements.