HARTING 09185067322 Equivalent & Substitute Parts

Part Overview

The HARTING 09185067322 is a shrouded rectangular connector header designed for through-hole mounting in board-to-cable/wire applications. This 6-position, 2-row connector operates across a wide temperature range of -55°C to 125°C and features gold-plated mating contacts with tin-plated posts. The part is currently active in production with full inventory availability (818 pieces in stock). Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific requirements while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Connector Type	Header
Contact Type	Male Pin
Pitch - Mating	0.100" (2.54mm)
Number of Positions	6
Number of Rows	2
Row Spacing - Mating	0.100" (2.54mm)
Shrouding	Shrouded - 4 Wall
Mounting Type	Through Hole
Termination	Solder
Contact Finish - Mating	Gold
Contact Finish - Post	Tin
Insulation Material	Polybutylene Terephthalate (PBT), Glass Filled
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09185067322 is determined by strict alignment of the following critical parameters:

Connector Type: Header
Contact Type: Male Pin
Pitch - Mating: 0.100" (2.54mm)
Number of Positions: 6
Number of Rows: 2
Row Spacing - Mating: 0.100" (2.54mm)
Shrouding: Shrouded - 4 Wall
Mounting Type: Through Hole
Termination: Solder
Contact Shape: Square
Contact Finish - Mating: Gold
Contact Finish - Post: Tin
Insulation Material: Glass-filled thermoplastic
Material Flammability Rating: UL94 V-0
RoHS Status: ROHS3 Compliant or RoHS Compliant
Moisture Sensitivity Level (MSL): 1 (Unlimited)

All identified substitute parts meet these core electrical and mechanical parameters. Variations in contact material, fastening type, insulation color, and specific contact dimensions do not preclude substitution when the primary functional requirements are satisfied.

Parameter Comparison

Parameter	HARTING 09185067322	TE Connectivity 1761681-1	Amphenol ICC 75869-131LF	Amphenol ICC 75869-331LF	Sullins SBH11-NBPC-D03-ST-BK	Samtec TST-103-01-G-D
Manufacturer	HARTING	TE Connectivity AMP Connectors	Amphenol ICC (FCI)	Amphenol ICC (FCI)	Sullins Connector Solutions	Samtec Inc.
Series	SEK	AMP-Latch	Quickie™	Quickie™	SBH11	Flex Stack, TST
Connector Type	Header	Header	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Positions	6	6	6	6	6	6
Number of Rows	2	2	2	2	2	2
Row Spacing - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Shrouding	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall	Shrouded - 4 Wall
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder	Solder
Fastening Type	Latch Holder	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Push-Pull
Contact Length - Mating	0.240" (6.10mm)	0.240" (6.10mm)	0.236" (6.00mm)	0.236" (6.00mm)	Not specified	0.250" (6.35mm)
Contact Length - Post	0.177" (4.50mm)	0.114" (2.90mm)	0.120" (3.05mm)	0.120" (3.05mm)	0.118" (3.00mm)	0.115" (2.92mm)
Insulation Height	0.350" (8.89mm)	0.350" (8.89mm)	0.377" (9.57mm)	0.377" (9.57mm)	0.358" (9.10mm)	0.350" (8.89mm)
Contact Shape	Square	Square	Square	Square	Square	Square
Contact Finish - Mating	Gold	Gold	Gold, GXT™	Gold, GXT™	Gold	Gold
Contact Finish - Post	Tin	Tin	Tin	Tin	Gold	Gold
Contact Material	Copper Alloy	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Brass	Phosphor Bronze
Insulation Material	PBT, Glass Filled	PCT	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polyamide (PA), Nylon	PBT, Glass Filled
Operating Temperature	-55°C ~ 125°C	-65°C ~ 105°C	Not specified	Not specified	-40°C ~ 105°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Insulation Color	Gray	Black	Blue	Blue	Black	Black
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Affected	REACH Affected	REACH Unaffected	REACH Unaffected
Product Status	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All identified substitute parts maintain active product status and comply with ROHS3 or RoHS standards. Selection among these alternatives should be based on the following considerations:

TE Connectivity 1761681-1 offers the closest electrical and mechanical alignment to the HARTING 09185067322, with identical mating contact length and insulation height. This part features ROHS3 compliance and REACH Unaffected status, making it suitable for regulated applications. The AMP-Latch series uses Push-Pull fastening rather than Latch Holder fastening.

Amphenol ICC 75869-131LF and 75869-331LF (Quickie™ series) provide functionally equivalent alternatives with slightly increased insulation height (0.377" vs. 0.350"). Both parts are RoHS Compliant but carry REACH Affected status. The primary difference between these two parts is packaging: 75869-131LF is supplied in bags, while 75869-331LF is supplied in tubes. Both use Push-Pull fastening.

Sullins SBH11-NBPC-D03-ST-BK operates across a narrower temperature range (-40°C to 105°C) compared to the HARTING part (-55°C to 125°C). This part features gold plating on both mating and post contacts and is rated for 3A per contact. ROHS3 compliance and REACH Unaffected status are maintained.

Samtec TST-103-01-G-D (Flex Stack, TST series) matches the full operating temperature range of the HARTING part (-55°C to 125°C) and features gold plating on both mating and post contacts. This part is rated for 3.4A per contact and maintains ROHS3 compliance and REACH Unaffected status.

Frequently Asked Questions (FAQ)

Q: Can I substitute the HARTING 09185067322 with any of these parts without PCB redesign?

A: All substitute parts share identical pitch (2.54mm), position count (6), row configuration (2 rows), and through-hole mounting type. However, variations in contact post length and insulation height may require verification of clearance in your specific PCB layout. The HARTING part has a contact post length of 0.177" (4.50mm), while substitutes range from 0.114" to 0.120". Insulation height varies from 0.350" to 0.377".

Q: What is the difference between the two Amphenol ICC parts (75869-131LF and 75869-331LF)?

A: These parts are electrically and mechanically identical. The only difference is packaging: 75869-131LF is supplied in bags, while 75869-331LF is supplied in tubes. Select based on your assembly process requirements and inventory management preferences.

Q: Does the fastening type difference (Latch Holder vs. Push-Pull) affect compatibility?

A: Fastening type determines the mating connector interface. The HARTING part uses Latch Holder fastening, while all substitutes use Push-Pull fastening. This means the mating connector must be compatible with the fastening mechanism. Verify that your mating connector supports the fastening type of your selected substitute.

Q: Are there temperature range limitations I should consider?

A: The HARTING 09185067322 and Samtec TST-103-01-G-D both operate from -55°C to 125°C. The TE Connectivity part operates from -65°C to 105°C (lower maximum temperature). The Amphenol ICC parts do not specify operating temperature. The Sullins part operates from -40°C to 105°C. Select based on your application's thermal requirements.

Q: What is the significance of REACH Affected vs. REACH Unaffected status?

A: REACH Unaffected parts (HARTING, TE Connectivity, Sullins, Samtec) are not subject to REACH regulatory restrictions. REACH Affected parts (Amphenol ICC 75869-131LF and 75869-331LF) may contain substances of concern and require additional compliance documentation for certain markets. Select REACH Unaffected parts for applications requiring unrestricted global distribution.

Q: Do contact material differences (Copper Alloy, Phosphor Bronze, Brass) affect electrical performance?

A: All contact materials are suitable for the electrical specifications of this connector class. Material selection affects mechanical durability, corrosion resistance, and cost. Phosphor Bronze and Brass offer superior mechanical properties and corrosion resistance compared to Copper Alloy. For high-cycle mating applications, Phosphor Bronze or Brass contacts are preferred.

Q: What is the current rating difference between parts?

A: The HARTING part does not specify a current rating. The Sullins SBH11-NBPC-D03-ST-BK is rated for 3A per contact. The Samtec TST-103-01-G-D is rated for 3.4A per contact. If your application requires a specific current rating, verify compatibility with the selected substitute.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message