Molex 0908140216 Equivalent & Substitute Parts

Part Overview

The Molex 0908140216 is a surface mount rectangular connector header in the Picoflex PF-50 series, featuring 16 positions at 1.27mm pitch with male blade contacts and shrouded 2-wall design. This connector is actively manufactured and widely used in automotive, industrial, medical, and general purpose applications requiring board-to-cable interconnection. Substitute parts may be required due to supply constraints, design revisions, or application-specific performance requirements.

Substiute Parts

0908140216

MolexIn Stock: 9050908140216 Datasheet

Current PartRFQ

8-188275-6

TE Connectivity AMP ConnectorsIn Stock: 23098-188275-6 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Molex 0908140216 is limited by the following critical parameters:

• Pitch specification: 0.050" (1.27mm) mating pitch is a defining characteristic. Substitute parts must maintain this pitch for mechanical and electrical compatibility.
• Connector orientation: The header configuration (male blade contacts) requires receptacle counterparts with matching contact geometry.
• Position count: 16 positions must be maintained for circuit board layout compatibility.
• Surface mount capability: Solder termination and SMD mounting type are required for PCB assembly compatibility.
• Electrical ratings: Current (1.2A) and voltage (250V) ratings establish minimum performance thresholds.
• Compliance standards: RoHS3 compliance and UL94 V-0 flammability rating are mandatory for regulated applications.

The identified substitute part (TE Connectivity 8-188275-6) represents a different connector family with incompatible pitch (0.100" vs 0.050") and contact configuration (receptacle vs header), indicating this part is not a direct mechanical or electrical substitute for the Molex 0908140216.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 8-188275-6 cannot serve as a direct substitute for the Molex 0908140216 due to fundamental pitch incompatibility (0.100" vs 0.050"). While both parts share surface mount capability, solder termination, and equivalent compliance certifications (RoHS3, UL94 V-0), the mating pitch difference prevents mechanical and electrical interchangeability on existing PCB designs.

For applications requiring the Molex 0908140216, direct substitutes must maintain the 0.050" (1.27mm) pitch specification. Selection of alternative parts should prioritize pitch compatibility, position count, and contact configuration alignment with the original design requirements.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 8-188275-6 be used as a direct replacement for the Molex 0908140216?

A: No. The TE Connectivity part operates at 0.100" (2.54mm) pitch, while the Molex part requires 0.050" (1.27mm) pitch. This fundamental difference prevents mechanical mating and PCB layout compatibility.

Q: What is the primary factor limiting substitution between these parts?

A: Mating pitch is the critical parameter. The Molex 0908140216 at 1.27mm pitch is not interchangeable with 2.54mm pitch connectors. PCB footprints and mating connector designs are pitch-specific.

Q: Are both parts compliant with current industry standards?

A: Yes. Both the Molex 0908140216 and TE Connectivity 8-188275-6 are RoHS3 compliant and carry UL94 V-0 flammability ratings, meeting current regulatory requirements for automotive, industrial, and medical applications.

Q: What packaging formats are available for the Molex 0908140216?

A: The Molex 0908140216 is supplied in Tape & Reel (TR) packaging. The TE Connectivity alternative is available in Cut Tape (CT) and Digi-Reel® formats, reflecting different manufacturing and distribution approaches.

Q: How do the electrical ratings compare?

A: The Molex 0908140216 is rated for 1.2A at 250V, while the TE Connectivity 8-188275-6 is rated for 100VDC with unspecified current capacity. The Molex part provides higher voltage capability for demanding applications.