Molex 0905003010 FFC Connector - Equivalent & Substitute Parts

Part Overview

The Molex 0905003010 is a 10-position flat flexible connector (FFC) with vertical contacts designed for through-hole PCB mounting at 0.100" (2.54mm) pitch. This connector features zero insertion force (ZIF) operation with slide lock actuation and is rated for 250V and 2.5A operation across -40°C to 85°C. The part is classified as obsolete, making identification of active equivalent components essential for ongoing design support and procurement.

Substiute Parts

0905003010

MolexIn Stock: 10770905003010 Datasheet

Current PartRFQ

487925-6

TE Connectivity AMP ConnectorsIn Stock: 835487925-6 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Molex 0905003010 is determined by the following critical parameters:

• Position Count: 10 positions (fixed requirement)
• Pitch: 0.100" (2.54mm) (fixed requirement)
• Mounting: Through hole solder termination (fixed requirement)
• Connector Orientation: Vertical contacts (fixed requirement)
• Locking Mechanism: Slide lock actuation (fixed requirement)
• Electrical Ratings: Minimum 250V voltage and 2.5A current capability
• Operating Range: -40°C to 85°C minimum
• ZIF Feature: Zero insertion force operation

The TE Connectivity AMP Connectors part 487925-6 meets these core substitution criteria. Both connectors share identical pitch, position count, through-hole mounting, vertical orientation, slide lock mechanism, and ZIF operation. The substitute maintains equivalent electrical performance within the specified operating envelope.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 487925-6 is the designated manufacturer-recommended substitute for the obsolete Molex 0905003010. Both connectors are RoHS compliant and share identical ECCN and HTSUS classifications, confirming regulatory alignment. The substitute maintains active product status, ensuring long-term availability and supply chain continuity.

The primary design difference is contact configuration: the Molex part features 2-sided vertical contacts while the TE Connectivity substitute provides 1-sided vertical contacts. This distinction affects mechanical interface geometry and must be evaluated against specific PCB layout requirements. Both connectors support identical electrical specifications and operating temperature ranges where specified.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 487925-6 directly replace the Molex 0905003010 in existing designs?

A: Direct replacement requires PCB layout compatibility verification. Both connectors share 0.100" (2.54mm) pitch, 10-position configuration, through-hole mounting, and slide lock mechanism. The contact configuration difference (2-sided vs. 1-sided) must be evaluated against your specific PCB footprint and mechanical clearance requirements.

Q: What is the significance of the contact configuration difference?

A: The Molex 0905003010 features 2-sided vertical contacts, while the TE Connectivity 487925-6 provides 1-sided vertical contacts. This affects the physical height above board (8.80mm vs. 7.87mm) and mechanical interface geometry. Verify that your PCB design accommodates the substitute's contact arrangement and height profile.

Q: Are both connectors electrically equivalent?

A: Both connectors use phosphor bronze contacts with tin finish and support ZIF operation with slide lock actuation. The Molex part specifies 250V and 2.5A ratings. The TE Connectivity substitute does not specify voltage and current ratings in the provided data; however, both share identical pitch, position count, and termination method, indicating functional electrical compatibility within standard FFC connector operating parameters.

Q: What are the compliance and supply considerations?

A: The Molex 0905003010 is obsolete, creating long-term procurement risk. The TE Connectivity 487925-6 is active and RoHS compliant, providing assured supply and regulatory compliance. Both parts are MSL 1 (unlimited moisture sensitivity) and share identical ECCN and HTSUS classifications.

Q: Are there packaging differences between these connectors?

A: The Molex part is supplied without specified packaging. The TE Connectivity 487925-6 is supplied in tube packaging. Verify packaging requirements for your procurement and assembly processes.