HARTING 09032966841 DIN 41612 96-Position Backplane Connector Receptacle

Part Overview

The HARTING 09032966841 is a 96-position DIN 41612 connector receptacle designed for through-hole PCB mounting applications. This female socket connector features gold-palladium contact finish and operates across an industrial temperature range of -55°C to 125°C. The part is currently active in production with 867 units in stock. Alternative equivalent parts are available from established manufacturers including 3M and Vector Electronics, providing options for supply chain continuity and application-specific requirements.

Substiute Parts

09032966841

HARTINGIn Stock: 95709032966841 Datasheet

Current PartRFQ

DIN-096CSC-S1L-HM

3MIn Stock: 1447DIN-096CSC-S1L-HM Datasheet

MFR RecommendedRFQ

RE96FSD

Vector ElectronicsIn Stock: 1066RE96FSD Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Equivalent substitution for the HARTING 09032966841 is determined by strict alignment of the following core parameters:

• Connector Type: Receptacle, Female Sockets (fixed requirement)
• Number of Positions: 96 (fixed requirement)
• Pitch: 0.100" (2.54mm) (fixed requirement)
• Number of Rows: 3 (fixed requirement)
• Mounting Type: Through Hole (fixed requirement)
• Termination: Solder (fixed requirement)
• Operating Temperature Range: -55°C to 125°C (fixed requirement)
• Series Compatibility: DIN 41612 standard compliance (fixed requirement)

The substitute parts listed below meet all fixed parameters. Variations in current rating, contact finish composition, and insulation material are within acceptable engineering tolerances for this connector category and do not prevent functional substitution in standard applications.

Parameter Comparison

Engineering Selection Recommendations

3M DIN-096CSC-S1L-HM is the primary recommended substitute. This part maintains full compliance with ROHS3 and UL94 V-0 flammability standards. The higher current rating of 3A provides additional margin for applications requiring sustained current delivery. The part is actively produced with 1,340 units in current inventory.

Vector Electronics RE96FSD is an alternative substitute suitable for applications with lower current requirements (1A maximum). This part maintains ROHS3 compliance and operates within the required temperature range. The lower current rating restricts its use to lower-power signal distribution applications. Inventory availability is 994 units.

Selection between these substitutes should be based on application current requirements and compliance certifications specific to the end-use environment.

Frequently Asked Questions (FAQ)

Q: Can the 3M DIN-096CSC-S1L-HM be used as a direct replacement for the HARTING 09032966841?

A: Yes. Both parts share identical mechanical dimensions, pitch, row configuration, and mounting specifications. The higher current rating (3A vs. 2A) and alternative insulation material (PBT vs. PCT) do not prevent functional substitution in standard backplane applications.

Q: What is the significance of the contact finish difference between gold-palladium and gold?

A: Both finishes provide equivalent electrical performance and corrosion resistance for standard signal and power distribution applications. The contact finish composition does not affect mechanical compatibility or electrical function in DIN 41612 connector applications.

Q: Is the Vector Electronics RE96FSD suitable for high-current applications?

A: No. The Vector Electronics part is rated for 1A maximum current, which is lower than both the HARTING original (2A) and the 3M substitute (3A). Use this part only in applications where current requirements do not exceed 1A per contact.

Q: Are all three parts compatible with the same PCB footprint?

A: Yes. All three parts conform to DIN 41612 standard specifications with identical 0.100" (2.54mm) pitch, 96-position configuration, and through-hole mounting requirements. PCB layout and footprint design remain unchanged across all three parts.

Q: What compliance certifications apply to each substitute?

A: HARTING 09032966841 and 3M DIN-096CSC-S1L-HM both carry UL94 V-0 flammability certification and ROHS3 compliance. Vector Electronics RE96FSD carries ROHS3 compliance with flammability rating not specified. All three parts are REACH Unaffected and carry EAR99 ECCN classification.