Request Quote
(Ships tomorrow)
HARTING 09031967951 DIN 41612 96-Position Backplane Connector Header
Part Overview
The HARTING 09031967951 is a 96-position DIN 41612 backplane connector header designed for through-hole PCB mounting in right-angle configuration. This connector features male pins with gold plating and is classified as an active product. Alternative equivalent parts may be required due to inventory availability, supply chain considerations, or specific application requirements where connector plug configurations are preferred over header configurations.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | 09031967951 |
| Manufacturer | HARTING |
| Category | Backplane Connectors |
| Series | DIN 41612 |
| Connector Type | Header, Male Pins |
| Number of Positions | 96 |
| Pitch | 0.100" (2.54mm) |
| Number of Rows | 3 |
| Style | C |
| Mounting Type | Through Hole, Right Angle |
| Contact Finish | Gold |
| Operating Temperature Range | -55°C to 125°C |
| Material Flammability Rating | UL94 V-0 |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) |
| Product Status | Active |
Substitute Part Grouping Explanation
Equivalent substitution for the HARTING 09031967951 is based on strict alignment of the following electrical and mechanical parameters:
- 96-position connector configuration
- 0.100" (2.54mm) pitch spacing
- 3-row layout with Style C designation
- Male pin contact configuration with gold plating
- Through-hole, right-angle mounting orientation
- Operating temperature range of -55°C to 125°C
- UL94 V-0 flammability rating
- Solder termination method
The substitute parts listed below are TE Connectivity AMP Connectors products that operate within the Eurocard series. While these parts function as plug connectors rather than headers, they maintain electrical and mechanical compatibility through identical position count, pitch, row configuration, contact material, and mounting characteristics. Both substitute parts are active products with confirmed inventory availability.
Parameter Comparison
| Parameter | HARTING 09031967951 | TE Connectivity 5650947-5 | TE Connectivity 650473-5 |
|---|---|---|---|
| Connector Type | Header, Male Pins | Plug, Male Pins | Plug, Male Pins |
| Number of Positions | 96 | 96 | 96 |
| Pitch | 0.100" (2.54mm) | 0.100" (2.54mm) | 0.100" (2.54mm) |
| Number of Rows | 3 | 3 | 3 |
| Style | C | C | C |
| Mounting Type | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle |
| Contact Finish | Gold | Gold | Gold |
| Operating Temperature Range | -55°C to 125°C | -55°C to 125°C | -55°C to 125°C |
| Material Flammability Rating | UL94 V-0 | UL94 V-0 | UL94 V-0 |
| RoHS Status | ROHS3 Compliant | RoHS Compliant | RoHS Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
| Product Status | Active | Active | Active |
Engineering Selection Recommendations
Both TE Connectivity substitute parts maintain active product status and comply with RoHS regulations. The HARTING 09031967951 carries ROHS3 compliance, while both substitute parts carry RoHS compliance. All three connectors share identical electrical specifications, mechanical dimensions, and thermal operating ranges. Selection between the main part and substitutes should be based on application-specific requirements regarding connector form factor (header versus plug configuration) and inventory availability. The substitute parts are available in higher quantities, with 5650947-5 offering 7,311 units and 650473-5 offering 1,963 units in stock.
Frequently Asked Questions (FAQ)
Q: Can TE Connectivity 5650947-5 or 650473-5 directly replace the HARTING 09031967951 in my application?
A: Both TE Connectivity parts are electrically and mechanically compatible based on matching position count, pitch, row configuration, contact material, and operating temperature range. However, the primary difference is connector form factor: the HARTING part is a header configuration while the TE Connectivity parts are plug configurations. Compatibility depends on whether your PCB layout and mating connector accommodate plug-type connectors.
Q: What is the difference between TE Connectivity 5650947-5 and 650473-5?
A: Both parts are functionally equivalent 96-position DIN connectors with identical electrical and mechanical specifications. The primary difference is the insulation material: 5650947-5 uses polymer thermoplastic glass-filled insulation, while 650473-5 uses polyester glass-filled insulation. Both materials meet UL94 V-0 flammability requirements and operate across the same temperature range.
Q: Are there any compliance differences between the main part and substitutes?
A: The HARTING 09031967951 is ROHS3 compliant, while both TE Connectivity substitutes are RoHS compliant. All three parts carry UL94 V-0 flammability ratings, operate across -55°C to 125°C, and maintain MSL 1 (Unlimited) moisture sensitivity levels. REACH status differs: the main part is REACH Unaffected while substitute parts show Vendor Undefined status.
Q: What packaging format is available for these connectors?
A: All three parts are supplied in bulk packaging, suitable for high-volume PCB assembly operations.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts