HARTING 09031646922 DIN 41612 96-Position Backplane Connector Header

Part Overview

The HARTING 09031646922 is a 96-position DIN 41612 backplane connector header with male pins, designed for through-hole PCB mounting. This connector features gold-plated contacts and is classified as a Level 2, Class C style connector. The part is currently active in production with 831 units in stock. Alternative components may be required due to application-specific requirements, inventory constraints, or design modifications necessitating receptacle configurations instead of header assemblies.

Substiute Parts

09031646922

HARTINGIn Stock: 84309031646922 Datasheet

Current PartRFQ

5650956-5

TE Connectivity AMP ConnectorsIn Stock: 80045650956-5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the HARTING 09031646922 header with the TE Connectivity 5650956-5 receptacle is based on the following critical parameters that remain constant across both components:

• Number of Positions and Loaded Positions: Both parts maintain 96 total positions with 64 positions loaded
• Pitch and Row Configuration: Identical 0.100" (2.54mm) pitch with 3-row arrangement
• Style and Class: Both conform to DIN 41612 Style C, Level 2, Class 2 specifications
• Mounting and Termination: Through-hole PCB mounting with solder termination on both parts
• Contact Finish: Gold plating on both components
• Compliance Standards: Both parts meet UL94 V-0 flammability rating and ROHS3 compliance requirements
• Moisture Sensitivity: Both rated MSL 1 (Unlimited)

The primary functional difference is the connector gender: the main part is a header with male pins, while the substitute is a receptacle with female sockets. This substitution is valid only when the mating connector configuration requires a receptacle instead of a header.

Parameter Comparison

Engineering Selection Recommendations

Both the HARTING 09031646922 and TE Connectivity 5650956-5 are active production components with full ROHS3 compliance and UL94 V-0 material certification. Selection between these parts depends on connector gender requirements: use the HARTING header for applications requiring male pins, or the TE Connectivity receptacle for applications requiring female sockets. Both components meet identical mechanical and electrical specifications for pitch, position count, mounting method, and contact finish. The TE Connectivity part provides an operating temperature range specification of -55°C to 125°C, which may be relevant for temperature-critical applications.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09031646922 header be directly replaced with the TE Connectivity 5650956-5 receptacle?

A: Direct replacement is possible only if your application requires a receptacle configuration instead of a header. Both parts share identical pitch, position count, row configuration, and mounting specifications. The substitution is valid from a mechanical and electrical standpoint when the mating connector gender is compatible with your design.

Q: Are the pitch and position specifications identical between these parts?

A: Yes. Both connectors feature 0.100" (2.54mm) pitch, 96 total positions with 64 positions loaded, and 3-row configuration in DIN 41612 Style C format.

Q: Do both parts meet the same compliance standards?

A: Both parts are ROHS3 compliant and rated UL94 V-0 for material flammability. Both have MSL 1 (Unlimited) moisture sensitivity ratings. The TE Connectivity part specifies an operating temperature range of -55°C to 125°C.

Q: What is the primary functional difference between these connectors?

A: The HARTING 09031646922 is a header with male pins designed to insert into a receptacle. The TE Connectivity 5650956-5 is a receptacle with female sockets designed to accept male pins. Selection depends on whether your PCB assembly requires the male or female connector configuration.

Q: Are both parts available in bulk packaging?

A: Yes. The HARTING part has 831 units in stock, and the TE Connectivity part has 7940 units in stock, both supplied in bulk packaging.